A computational study of base‐catalyzed reactions between isocyanates and epoxides affording 2‐oxazolidones and isocyanurates

Title reactions were investigated with ab initio calculations. Methyl isocyanate and ethylene oxide were adopted as model reactants. The products, 2‐oxazolidones and isocyanurates, cannot be yielded without a base catalyst. The 2‐oxazolidone may be produced by a dual S_N2 reaction, where the catalyst base (e.g., Cl⁻) is a nucleophile and a leaving group on the ethylene–oxide carbon. Isocyanurate is generated by the stepwise association of three isocyanate molecules, where one of the molecules is initially linked with a base. The six‐membered ring isocyanurate is isomerized stepwise into the components isocyanate and 2‐oxazolidone. A tetrahedral type of complex between the isocyanurate and a base‐catalyzed ethylene oxide is the key intermediate for the isomerization. © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 316–326, 2001     

Synthesis and potential central nervous system stimulant activity of 5,8‐methanoquinazolines and bornano‐triazines fused with imidazole and pyrimidine

Starting from 3‐chloro‐5,8‐methanoquinazoline 1 and 3‐chloro‐bornano[1,2,4]triazine 7 , the novel 5,8‐methanoquinazolines 5a‐b and bornano[1,2,4]triazines 10a‐b fused with imidazole and pyrimidine were prepared. None of these compounds showed any satisfactory central nervous system stimulant activities.     

Surface-fluorinated graphite anode materials for Li-ion batteries

Surface modification of graphite powder has been performed by chemical fluorination using elemental fluorine at 200 °C and 300 °C. This process leads to an increase of the BET surface area due to partial CC bond breaking. Surface analyses performed by secondary ions mass spectrometry have shown that the H + O content at the surface of graphite is significantly decreased by this fluorination treatment. Fluorinated graphite powders have been tested as negative electrodes in Li-ion battery, chronopotentiometry measurements have shown that the fluorinated graphite exhibits better electrochemical performances than raw graphite powder notably due to an increase of the surface area which allows the storage of a higher amount of lithium into the host lattice. In addition, impedance measurements performed in a delithiated state have shown a significant decrease of the total cell resistance, i.e. a decrease of both the charge transfer resistance and the resistance related to the solid electrolyte interface (SEI) layer.     

Precise measurement of the self-diffusion coefficient for poly(ethylene glycol) in aqueous solution using uniform oligomers

Uniform poly(ethylene glycol) (PEG) oligomers, with a degree of polymerization n=1-40, were separated by preparative supercritical fluid chromatography from commercial monodispersed samples. Diffusion coefficients, D, for separated uniform PEG oligomers were measured in dilute solutions of deuterium oxide (D(2)O) at 30 degrees C, using pulsed-field gradient nuclear magnetic resonance. The measured D for each molecular weight was extrapolated to infinite dilution. Diffusion coefficients obtained at infinite dilution follow the scaling behavior of Zimm-type diffusion, even in the lower molecular weight range. Molecular-dynamics simulations for PEG in H(2)O also showed this scaling behavior, and reproduced close hydrodynamic interactions between PEG and water. These findings suggest that diffusion of PEG in water is dominated by hydrodynamic interaction over a wide molecular weight range, including at low molecular weights around 1000.     

Temperature- and field-dependent energy transfer in CdSe nanocrystal aggregates studied by magneto-photoluminescence spectroscopy

The influence of temperature and applied magnetic fields on photoluminescence (PL) emission and electronic energy transfer (ET) of both isolated and aggregated CdSe nanocrystals was investigated. Following 400-nm excitation, temperature-dependent, intensity-integrated and energy-resolved PL measurements were used to quantify the emission wavelength and amplitude of isolated CdSe nanocrystals. The results indicated an approximately three-fold increase in PL intensity upon decreasing the temperature from 300 K to 6 K; this was attributed to a reduction of charge carrier access to nanocrystal surface trap states and suppression of thermal loss channels. Temperature-dependent PL measurements of aggregated CdSe nanocrystals, which included both energy-donating and -accepting particles, were analyzed using a modified version of F?rster theory. Temperature-dependent ET efficiency increased from 0.55 to 0.75 upon decreasing the sample temperature from 225 K to 6 K, and the ET data contained the same trend observed for the PL of isolated nanoclusters. The application of magnetic fields to increase nanocrystal ET efficiency was studied using magneto-photoluminescence measurements recorded at a sample temperature of 1.6 K. We demonstrated that the exciton fine structure population of the donor was varied using applied magnetic fields, which in turn dictated the PL yield and the resultant ET efficiency of the CdSe nanocrystal aggregate system. The experimental data indicated an ET efficiency enhancement of approximately 7%, which was limited by the random orientation of the spherical nanocrystals in the thin film.     

Mesomorphic phase transitions of 4,4′-bis(ω-hydroxyalkoxy)-azoxybenzenes. Appearance of isotropic mesophase

Abstract

Mesomorphic phase transitions of 4,4′-bis(ω-hydroxyalkoxy)-azoxybenzenes (number of carbons in the alkoxy group n = 2,3,6,8,11 and 12) have been studied by differential scanning calorimetry (DSC) and polarized optical microscopy. For the n = 8 compound, an optically isotropic (01) mesophase reminiscent of the smectic D phase was observed in the temperature range of 4 0 M 1 1 K between smectic C (below 400 K) and nematic (above 41 1 K) phases. On the other hand, the 0 1 mesophase was not observed in the other homologues used here; the n = 2,3 and 6 compounds had only a nematic phase and the n= 11 and 12 compounds had only a smectic C phase. This preliminary work points out that the thermal and optical properties of the 01 phase for the n = 8 compound are very similar to those of the smectic D phase.     

Degradation of organic compounds on TiO<Subscript>2</Subscript> photocatalysts prepared by a hydrothermal method in the presence of NH<Subscript>4</Subscript>F

TiO₂ photocatalysts were synthesized by a hydrothermal method from tetraisopropyl orthotitanate (TPOT) in the presence of NH₄F with different NH₄F/Ti molar ratios (0, 0.25, and 1). The formation of a well-crystallized anatase phase of TiO₂ and the suppression of phase transition to rutile were observed, even at high calcination temperature, owing to the effects of NH₄F. The TiO₂ synthesized hydrothermally with NH₄F exhibited absorption with a shift to the longer wavelengths of the visible-light region. The hydrothermally synthesized TiO₂ with a moderate amount of NH₄F exhibited high photocatalytic activity for the degradation of alcohol diluted in water under both UV-light and visible-light irradiations.     

Synthesis of [3]Rotaxanes that Utilize the Catalytic Activity of a Macrocyclic Phenanthroline–Cu Complex: Remarkable Effect of the Length of the Axle Precursor

[3]Rotaxanes, which consist of one macrocyclic phenanthroline compound and two axle components, were prepared by the oxidative dimerization of an alkyne compound with bulky tris[4′‐cyclohexyl‐(1,1′‐biphenyl)‐4‐yl]methyl blocking group. The catalytic activity of a macrocyclic phenanthroline–Cu complex was utilized to thread the two axle components inside the ring. The alkyne compound with chain of 15 or 20 methylene groups gave [3]rotaxanes in high yields, whereas the axle with a chain of six methylene groups afforded a [3]rotaxane in very poor yield. We also examined the effect of the ring size on the synthesis of [3]rotaxanes. [3]Rotaxanes were not isolated when a macrocyclic phenanthroline compound with a smaller ring size was used.     

二氧化钛负载的镍氧化态对乙腈气相加氢的影响

采用浸渍法制备了二氧化钛负载镍催化剂. 通过控制还原温度(200-400 ℃), 在TiO₂上得到不同氧化态的镍颗粒. 结果发现, 乙腈气相加氢反应受镍氧化态的影响, 300 ℃下还原的催化剂表现出最高的乙腈转化活性, 100 ℃时将乙腈完全转化. 产物产率受到Ni/TiO₂催化剂酸性的影响, 而催化剂的酸性不仅受到TiO₂载体的影响, 还受到负载物Ni 颗粒性质的影响. 随着催化剂还原温度升高, 金属态镍逐渐出现在催化剂表面, 降低了催化剂的酸性强度, 使三乙胺的最大产率升高(从34%升高到48%左右). 研究还发现在Ni/TiO₂催化乙腈加氢反应中, 三乙胺是初始产物. Ni 的状态不仅影响乙腈的转化, 还影响产物的脱附. 提出了乙腈加氢的第一步反应机理.     

Superacid-Catalyzed Reaction of Substituted Benzaldehydes with Benzene

Benzaldehydes bearing an electron-withdrawing group reacted with 2 equiv of benzene in the presence of a superacid, trifluoromethanesulfonic acid, to give substituted triphenylmethane in good yields. On the other hand, benzaldehydes bearing an electron-donating or a neutral group reacted under the similar conditions to give unsubstituted diphenylmethane and triphenylmethanol, together with substituted benzene. We propose a new mechanism of this reaction, which involves transalkylation as the key step.