Simple preparation and catalytic activity of Pd particles dispersed mesoporous carbons from poly(VDC/MA) containing Pd and Y compounds

We report a simple preparation of Pd particles dispersed mesoporous carbons. The carbons were prepared by steam activation of carbonized vinylidene chloride/methyl acrylate copolymer (poly(VDC/MA)) containing yttrium acetylacetonate (Y(acac)(3)) and palladium acetylacetonate (Pd(acac)(2)). The resulting carbons consist of high contents of mesopore and uniformly dispersed fine Pd particles. We measured the catalytic activities of the carbons obtained for hydrogenation of methyl linoleate. The Pd particles dispersed in mesoporous activated carbons obtained from poly(VDC/MA) containing both Y(acac)(3) and Pd(acac)(2) showed high catalytic activities, compared with the microporous activated carbon obtained from poly(VDC/MA) containing only Pd(acac)(2). Especially Pd particles dispersed in mesoporous carbons exhibited excellent selectivity for hydrogenation of diene (methyl linoleate) to monoene (methyl oleate).     

Real-time measurement of nitric oxide using a bio-imaging and an electrochemical technique

Nitric oxide (NO) is an important mediator responsible for numerous physiological phenomena. Transient levels of NO in biological systems usually range from nanomolar to micromolar concentrations, with a rapid return to basal levels normally seen following these increases. Because NO can diffuse only over a local area in limited time due to such low levels of production and due to its short life-time prior to degradation, high spatial and temporal resolutions are required for direct and continuous NO measurement if the physiological role of NO is to be investigated in any system. For such purposes, analytical methods based on bio-imaging and electrochemical techniques for the measurement of NO are useful. In this paper, we describe the successful application of these methods to a number of biological systems. Specifically, complementary application of these methods demonstrate that it is possible to detect real-time NO production from nervous tissue with high spatial and temporal resolutions.     

Facile S-alkyl thiocarbamate synthesis by a novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur

A novel DBU-assisted carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamates. In the presence of DBU (1,8-diazabicyclo[5.4.0]undec-7-ene), S-alkyl thiocarbamates are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20°C). In the absence of DBU, however, no formation of S-alkyl thiocarbamate is observed. The present DBU-assisted carbonylation can also be applied to new synthetic methods for benthiocarb and orthobencarb (herbicides) and carbamoyl chlorides.     

Tris(porphyrinyl-oxinato)Ga Complexes as a Photosynthetic Antenna Miniature

Two oxinylporphyrins, 5-(8-hydroxy-5-quinolinyl)-10,15,20-( p -tolyl)- porphyrin ( 1 ) and 5,15-bis(8-hydroxy-5-quinolinyl)-10,20-bis( n -heptyl)-porphyrin ( 2 ), were prepared and coordinated with Ga(III) to afford tris(oxinato) complex 3 and poly(oxinato) complex 4 , respectively. The structure of 3 was analyzed by variable temperature NMR study with referring to tris(8-hydroxy-5-quinolinyl)Ga(III) complex 5 to be in a meridional form. Oxinato ligands of 3 and 5 were exchanged with one another, with keeping the meridional structure. UV-Vis and fluorescence spectra of tris(oxinato)complex 3 and poly(oxinato)complex 4 were compared with each monomeric compound 1 and 2 . The absorption spectra showed only a slight broadening of the Soret band, suggesting trivial electronic and excitonic interactions. The fluorescence intensity was increased significantly compared with each monomeric compound 1 and 2 . At the same time, efficient excitation energy transfer among three porphyrins has been observed.     

A highly selective photoinduced selenoperfluoroalkylation of terminal acetylenes by using a novel binary system of perfluoroalkyl iodide and diphenyl diselenide

Upon irradiation through Pyrex with a xenon lamp (hν>300 nm), terminal acetylenes undergo highly selective selenoperfluoroalkylation with perfluoroalkyl iodide and diphenyl diselenide. In this reaction, perfluoroalkyl and phenylseleno groups are selectively introduced into the terminal and internal positions of acetylenes, respectively.     

Inhibitory effects of 3-O-acyl-(+)-catechins on Epstein-Barr virus activation

In the course of an exploratory investigation of antitumor-promoting catechins, 3-O-acyl-(+)-catechins of varying carbon lengths from C(4) to C(18) were assessed for inhibitory effects on the activation of the Epstein-Barr virus early antigen. Like 3-O-acyl-(-)-epigallocatechins, the (+)-catechin derivatives showed promising effects with the C-3 acyl chain of C(8)-C(11) carbon atoms.     

Identification of Shiga toxins in Shiga toxin-producing Escherichia coli using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry

We developed a rapid and reliable identification method for Shiga toxins in Shiga toxin-producing Escherichia coli (STEC) using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESI-MS). Polyclonal antisera specific for Shiga toxin 1 (Stx1) and Shiga toxin 2 (Stx2) were raised in rabbits so as to be used for the immunoprecipitation. The immunoprecipitaion was carried out by mixing sample solutions with 50 microl each of the antisera to Stx1 and Stx2 followed by allowing the mixed solutions to stand for 30 min. The quantity required to obtain the immunoprecipitate was more than 0.5 microg of Shiga toxins. HPLC-ESI-MS analysis of the resulting immunoprecipitates provided accurate molecular weight information on Shiga toxins, leading to direct evidence for the presence of these toxins. It requires at most two days to perform our procedure from toxin extraction to measurement of HPLC-ESI-MS whereas the previous method using isolation procedures required about two weeks to complete. The usefulness of the present method has been demonstrated by identifying Stx1, Stx2 and a variant of Stx2 (Stx2e) in the immunoprecipitates prepared from STEC strains.     

Oligo(ethylene glycol)/alkyl‐modified Chromophore Assemblies for Photon Upconversion in Water

Molecular self‐assembly is a powerful means to construct nanoscale materials with advanced photophysical properties. Although the protection of the photo‐excited states from oxygen quenching is a critical issue, it still has been in an early phase of development. In this work, we demonstrate that a simple and typical molecular design for aqueous supramolecular assembly, modification of the chromophoric unit with hydrophilic oligo(ethylene glycol) chains and hydrophobic alkyl chains, is effective to avoid oxygen quenching of triplet–triplet annihilation‐based photon upconversion (TTA‐UC). While a TTA‐UC emission is completely quenched when the donor and acceptor are molecularly dispersed in chloroform, their aqueous co‐assemblies exhibit a clear upconverted emission in air‐saturated water even under extremely low chromophore concentrations down to 40 μm . The generalization of this nano‐encapsulation approach offers new functions and applications using oxygen‐sensitive species for supramolecular chemistry.     

Regioselective synthesis and properties of novel [60]fullerene bisadducts containing a dibenzocrown ether moiety

The reactions of [60]fullerene with bis-o-quinodimethane precursors 3, 4, and 5 containing a dibenzo-18-crown-6, 24-crown-8 and 30-crown-10 moiety, respectively, were investigated. Both 3 and 4 provided trans-4 bisadducts 6a and 7a, respectively, as major product, though the selectivity in the latter was lower than that in the former. As minor product, 6b (cis-2) was produced from 3, while 7c (e) as well as 7b (cis-2) were produced from 4. Precursor 5 exclusively afforded e bisadduct 8 without any other regioisomers. These bisadducts showed different ionophoric properties from one another; for instance, 6a and 7b exhibited a high complexing ability toward the K+ ion, while 6b hardly showed complexation with any alkali metal ions. The selectivity coefficients (K(Na,K)(pot)) of 6a and 7b toward K+ over Na+ ion, determined with an ion-selective electrode, were much higher than that of dibenzo-18-crown-6.     

Probes for narcotic receptor-mediated phenomena. 33. Construction of a strained trans-5,6-ring system by displacement of a nitro-activated aromatic fluorine. synthesis of the penultimate oxide-bridged phenylmorphans

The synthesis of the ortho- and para-e isomers in the oxide-bridged 5-phenylmorphan series of rigid tetracyclic compounds was accomplished via rac-5-(2-fluoro-5-nitrophenyl)-2-methyl-2-azabicyclo[3.3.1]nonan-9beta-ol ((+/-)-10), an intermediate containing an aromatic nitro-activated fluorine atom. The fluorine atom was used as the leaving group for the formation of the strained tetracyclic trans-fused 5,6-ring system in rac-(1alpha,4aalpha,9aalpha)-1,3,4,9a-tetrahydro-2-methyl-6-nitro-2H-1,4a-propanobenzofuro[2,3-c]pyridine ((+/-)-11), although preference for cis ring fusion during the formation of tricyclic tetra- and hexahydrodibenzofurans has been well-documented. Single-crystal X-ray crystallographic study of the desired para-e isomer ((+/-)-2), as well as of two intermediates in its synthesis, provided assurance of the correct structures. The e-isomers are among the last of the 12 oxide-bridged 5-phenylmorphans to be synthesized. We envisioned the syntheses of these rigid, tetracyclic compounds in order to determine the three-dimensional pattern of a ligand that would enable interaction with opioid receptors as agonists or antagonists.