Measurement of energy release rate and energy flux of rapidly bifurcating crack in Homalite 100 and Araldite B by high-speed holographic microscopy

High-speed holographic microscopy is applied to take three successive photographs of fast propagating cracks in Homalite 100 or in Araldite B at the moment of bifurcation. Crack speed at bifurcation is about 540 m/s on Homalite 100, and about 450 m/s on Araldite B. From the photographs, crack speeds immediately before and after bifurcation are obtained, and it is found that discontinuous change of crack speed does not exist at the moment of bifurcation in the case of Homalite 100, but exists in the case of Araldite B. From the photographs, crack opening displacement (COD) is also measured along the cracks as a function of distance r from the crack tips. The measurement results show that the CODs are proportional to √r before bifurcation. After bifurcation, the CODs of mother cracks are proportional to √r, though the CODs of branch cracks are not always proportional to √r. The energy release rate is obtained from the measured CODs, and it is found that energy release rate is continuous at bifurcation point in both cases of Homalite 100 and Araldite B. Energy flux that shows the energy flow toward a crack tip is also obtained.     

Higher Harmonic Operations of Submillimeter Wave Gyrotrons (Gyrotron FU Series)

Higher harmonic operation of gyrotrons is necessary to obtain high frequencies. Some gyrotrons included in the Gyrotron FU series developed at Fukui University have achieved operation at the third and even fourth harmonics of the electron cyclotron frequency. The output lies in the millimeter to submillimeter wavelength range and the output powers are several watts to several tens of watts. In this paper, the gyrotrons and the conditions under which they operate are described in detail.     

Phase Distribution Measurement of Light Wave by Adaptive Control of Pupil Function with Local Algorithm

In developing a new method to measure the phase distribution of a light wave utilizing the adaptive control of the pupil function with a liquid crystal panel, the optimization procedure for the adaptive control is shown to improve when a local algorithm is adopted. The feasibility of the proposed system is confirmed by computer simulation as well as by some basic experiments.     

Ruby ESR Over a Wide Frequency Range in the Millimeter Wave Region

The ESR of Cr³⁺ in dark ruby is measured using a high frequency ESR spectrometer with a wide frequency range which uses a gyrotron as the radiation source. For this purpose, GYROTRON FU- IV A developed at Fukui University was optimized for use in an ESR apparatus operating in the millimeter-wave range.The observed fine structure constant D for ruby is found to be D –5.728 GHz and the g-values g 1.981, g 1.982. Both the values of |D| and g are smaller than those obtained at lower frequencies by other work. Higher order terms of the spin hamiltonian are discussed in order to understand the ruby ESR results in this higher frequency range.     

Generation and stabilization of ultrafast optical pulse trains with monolithic mode-locked laser diodes

In this paper, we report on the generation and the stabilization of ultrafast optical pulse trains exceeding 100 GHz from monolithic mode-locked laser diodes (MLLDs) combined with some new techniques such as subharmonic synchronous mode-locking (SSML) and repetition-frequency multiplication (RFM) method. Key subjects to increase the pulse repetition frequencies of the MLLDs such as fast absorption recovery and harmonic mode-locking operation are discussed. 500 GHz optical pulse generation from a short-cavity, graded-index separated confinement heterostructure MLLD and THz-rate pulse generation by harmonic mode-locking are reported. We also demonstrate the stabilization of a 160 GHz MLLD by the SSML with subharmonic-frequency optical pulse injection and reveal that the SSML is very promising as a stabilization technique of the ultrafast MLLD beyond the limitations by the electronic device speed. A method to accurately measure the timing jitter of such ultrafast optical pulse train, all-optical down converting using a nonlinear optical device, is also presented. We also mention another choice for ultrafast optical pulse generation using the MLLD combined with a dispersive medium such as an optical fiber. We demonstrate here the generations of stable 84–256 GHz optical pulse trains by the RFM method of the MLLD stabilized by the SSML.     

Surface structures of equimolar mixtures of imidazolium-based ionic liquids using high-resolution Rutherford backscattering spectroscopy

Surface structures of equimolar mixtures of imidazolium-based ionic liquids (ILs) having a common cation (1-butyl-3-methylimidazolium ([C₄MIM]) or 1-hexyl-3-methylimidazolium ([C₆MIM])) and different anions (bis(trifluoromethanesulfonyl)imide ([TFSI]), hexafluorophosphate ([PF₆]) or chlorine) are studied using high-resolution Rutherford backscattering spectroscopy (HRBS). Both cations and anions have the same preferential orientations at the surface as in the pure ILs. In the mixture, the larger anion is located shallower than the smaller anion. The [TFSI] anion is slightly enriched at the surface relative to [PF₆] with coverage of ~ 60% for the equimolar mixtures of [C₄₍₆₎MIM] [TFSI] and [C₄₍₆₎MIM] [PF₆]. No surface segregation is observed for [C₆MIM] [TFSI]_0.5[Cl]_0.5 and [C₆MIM] [PF₆]_0.5[Cl]_0.5. These results are different from the recent TOF-SIMS measurement where very strong surface segregation of [TFSI] was concluded for the mixture of [C₄MIM] [TFSI] and [C₄MIM] [PF₆].     

Reflection of a pulse by multiple-dielectric layers

The reflection of a pulse by multiple-dielectric layers is treated theoretically. The reflected wave is obtained by expanding the reflection coefficient of an elementary plane wave in a series, including the special case for which total reflection occurs. The pulsed waves reflected by two-dielectric slabs are considered in detail both analytically and numerically. The effect of a carrier frequency of a pulse-modulated carrier wave on the reflected wave form is also discussed.     

Photoinduced electron transfer and excitation energy transfer in directly linked zinc porphyrin/zinc phthalocyanine composite

Photoinduced electron transfer (ET) and excitation energy transfer (ENT) reactions in monomer and slipped-cofacial dimer systems of a directly linked Zn porphyrin (Por)-Zn phthalocyanine (Pc) heterodyad, ZnPc-ZnPor, were investigated by means of the picosecond and femtosecond transient absorption spectroscopies. In the dimer dyad system of two heterodyads connected through the coordination bond between two imidazolyl-substituted ZnPor bearing ZnPc, ZnPc-ZnPor(D), the rapid ENT from the ZnPor to ZnPc in the subpicosecond time region was followed by photoinduced charge separation (CS) and charge recombination (CR) with time constants of 47 and 510 ps, respectively. On the other hand in the monomer dyad system, no clear charge-separated state was observed although the CS with a time constant of 200 ps and CR with < or =70 ps were estimated. These results indicated that the dimer slipped-cofacial arrangement of pair porphyrins is advantageous for the effective production of the CS state. This advantage was discussed from the viewpoint of a decrease in the reorganization energy of the dimer relative to that of the monomer system. In addition, the electrochemical measurements indicated that the strong interaction between ZnPc and ZnPor moieties also contributed to the fast CS process despite the marginal driving force for the CS process. The dimer dyad of ZnPc-ZnPor provides full advantages in efficiencies of the light harvesting and the CS state production.     

Nickel-catalyzed [4+3] cycloaddition of ethyl cyclopropylideneacetate and 1,3-dienes

The [4+3] cycloaddition of ethyl cyclopropylideneacetate (1) with 1,3-dienes proceeded in the presence of Ni(cod)₂-TOPP (tri-o-biphenylyl phosphite). The reaction provided a new method for the synthesis of cycloheptene derivatives. The mechanism of the reaction was proposed.