Rational design and crystal structure determination of a 3-D metal-organic jungle-gym-like open framework

A new three-dimensional (3-D) jungle-gym-like open metal-organic framework has been synthesized from a two-dimensional (2-D) layer compound using a heterogeneous pillar insertion reaction. Both the starting 2-D layer and the resulting 3-D open compounds have been characterized using X-ray crystallography.     

Prediction of measurement precision of apparatus using a chemometric tool in electrochemical detection of high-performance liquid chromatography

The relative standard deviation (RSD) of measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD) was predicted by a chemometric tool based on the 1/f fluctuation model which is made up of white noise and a Markov process, called the Function of Mutual Information (FUMI) theory. FUMI theory can provide aprecise and reliable detection limit from a single measurement of noise and signal in HPLC-ECD. To obtain RSD (n = 5) for determination of (-)-epicatechin at five concentrations required 12.5 h, while the predicted RSD by FUMI theory required only 0.5 h (one measurement). Moreover, to trace the source of instrumental noise, power spectra of chromatographic baseline were used. Selection of a suitable apparatus in HPLC-ECD system, acquisition of RSD, and detection limits for determination of catechins by HPLC-ECD were simply and easily made by this chemometric tool within a very short time. The use of the FUMI theory for the prediction of measuring precision was more efficient and the optimization was less time-consuming to be suited for determination.     

Optimization of HPLC-ECD conditions for determination of catechins with precision and efficiency based on the FUMI theory.

A chemometric tool based on the Function of Mutual Information (FUMI) theory can provide a relative standard deviation (RSD) without repetitive measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD). Two parameters: precision (= information content) phi and efficiency (= information content/time) theta, which were calculated from predicted RSD based on the FUMI theory, were used to optimize HPLC-ECD conditions, such as applied potential, flow rate, column length, and size of ODS porous packing. We selected catechins as analytes, and found that the most optimum applied potential and flow rate were +600 mV vs. SCE and 0.9 mL/min, respectively, because they gave the largest phi and theta values. Buffer concentration in mobile phase is less effective for giving large phi and theta values. Since the FUMI theory makes it possible to predict RSD without repetitive measurements, the present method saves considerable amounts of chemicals and experimental time, and was found to be useful for the optimization of experimental conditions for determination by HPLC-ECD.     

Crystal Structure and Property of Perovskite-Type Oxides Containing Ion Vacancy

Studies on the role of oxygen vacancy in structural change of nonstoichiometric perovskites and a property of oxygen-deficient perovskite-related K₂NiF₄ compounds are reviewed.The structural changes on which the authors focused are cation ordering and lattice distortion. The relationship between the distortion and oxygen vacancy was investigated by comparing the structures of Sr₂(Sr_1-xM_x)TaO_6-d (M = Ca²⁺ and Nd³⁺) solid solutions. It was found that distortion of a perovskite-type lattice decreased with an increasing amount of oxygen vacancies. In order to investigate the relationship between the cation ordering on octahedral sites and oxygen vacancy, structures of stoichiometric Sr_2-xLa_xCo_1-yTa_1+yO₆ and oxygen-deficient Sr_2-xLa_xMg_1-yTa_1+yO_6-d solid solutions were compared. The authors' work reveals that the cation ordering affects the amount of oxygen vacancies in addition to cation charge and size.     

Analysis by partial reflection spectrometry of protonated tetraphenylporphyrin adsorbed at a liquid-liquid interface

Visible reflection spectra of diprotonated meso-tetraphenylporphyrin adsorbates spontaneously formed at a dodecane-aqueous sulfuric acid interface have been measured using a home-made device comprising a prism-cell and variable-angle optics. The tilt angle of the pyrrole ring plane was estimated to be 47 degrees from the interface normal by use of an experimentally evaluated molecular density (1.20x10(-10) mol cm(-2)) of the diprotonated molecule in a monolayer form at the liquid-liquid interface. Positive and negative bands have been observed in the p-polarized partial internal reflection (p-PIR) spectra, whose band locations correspond to those in p-polarized external reflection (p-ER) spectra. Nevertheless, the bands in the p-PIR exhibited reversed sign to those of p-ER spectra. These suggest that the surface selection rule of the p-PIR spectrometry has a reversal rule of p-ER and p-PIR can also be used for the analysis of molecular orientation.     

NLO‐active maleimide copolymers with ­high glass transition temperatures

We synthesized some novel rigid NLO‐active maleimide copolymers bearing DR‐1 moieties ( PMPD , PHSD and PHND ). All copolymers exhibited high T_g's (190～197 °C), good solubilities for common solvents and excellent film‐forming properties. Dependence of film thickness on the d₃₃ value for the poled copolymer films induced by corona poling was investigated and it was demonstrated that in less than thickness of 0.3 µm decrease of the thickness gives rise to remarkable increase in the d₃₃ value. The poled copolymer films exhibited large d₃₃ values (270 × 10^?9 esu (film thickness 0.13 µm) for PMPD , 290 × 10^?9 esu (0.12 µm) for PHSD and 350 × 10^?9 esu (0.08 µm) for PHND ) as well as large r₃₃ values (51.0 pmV^?1 for PMPD and 60.4 pmV^?1 for PHND ) which are significantly large compared to the value of LiNbO₃ (31 pmV^?1) as a typical EO material. The d₃₃ values of the poled copolymers were kept constant even after standing 1000h at 80 °C, although a small decrease was observed at an initial stage. Further, the d₃₃ values did not change up to ca. 123 °C upon heating at the rate of 10 °C/min in all cases. Copyright © 2002 John Wiley & Sons, Ltd.     

Analytical process control of the Celeste R&D installation of IPEN-CNEN/SP

Celeste-1 is a lab-scale hot cell intended for R&D work in reprocessing of low burn-up spent fuel elements. The studies are concerned with head-end, first separation cycle by Purex Process using mini mixer-settlers and development of analytical techniques. The analytical monitoring for process control purposes is based on several off-line techniques, such as X-ray fluorescence spectrometry, potentiometric titration, -and -spectroscopy, spectrophotometry, fluorimetry, density measurement and gas chromatography. The analytical treatment takes place in a shielded working place analytical hot cell, glove boxes and hoods and some final measurements are made in the associated analytical laboratory. A pneumatic system is used for transporting analytical samples. All analytical procedures are ready and in operation.     

Synthesis of stable and cell-type selective analogues of cyclic ADP-ribose, a Ca(2+)-mobilizing second messenger. Structure--activity relationship of the N1-ribose moiety

We previously developed cyclic ADP-carbocyclic ribose (cADPcR, 2) as a stable mimic of cyclic ADP-ribose (cADPR, 1), a Ca(2+)-mobilizing second messenger. A series of the N1-ribose modified cADPcR analogues, designed as novel stable mimics of cADPR, which were the 2"-deoxy analogue 3, the 3"-deoxy analogue 4, the 3"-deoxy-2"-O-(methoxymethyl) analogue 5, the 3"-O-methyl analogue 6, the 2",3"-dideoxy analogue 7, and the 2",3"-dideoxydidehydro analogue 8, were successfully synthesized using the key intramolecular condensation reaction with phenylthiophosphate-type substrates. We investigated the conformations of these analogues and of cADPR and found that steric repulsion between both the adenine and N9-ribose moieties and between the adenine and N1-ribose moieties was a determinant of the conformation. The Ca(2+)-mobilizing effects were evaluated systematically using three different biological systems, i.e., sea urchin eggs, NG108-15 neuronal cells, and Jurkat T-lymphocytes. The relative potency of Ca(2+)-mobilization by these cADPR analogues varies depending on the cell-type used: e.g., 3"-deoxy-cADPcR (4) > cADPcR (2) > cADPR (1) in sea urchin eggs; cADPR (1) > cADPcR (2) approximately 3"-deoxy-cADPcR (4) in T-cells; and cADPcR (2) > cADPR (1) > 3"-deoxy-cADPcR (4) in neuronal cells, respectively. These indicated that the target proteins and/or the mechanism of action of cADPR in sea urchin eggs, T-cells, and neuronal cells are different. Thus, this study represents an entry to cell-type selective cADPR analogues, which can be used as biological tools and/or novel drug leads.     

An effective method to use ionic liquids as reaction media for asymmetric reduction by Geotrichum candidum

An effective method was developed to use an enzyme in ionic liquids; the asymmetric reduction of ketones by Geotrichum candidum in ionic liquids proceeded smoothly with excellent enantioselectivity when the cell was immobilized on water-absorbing polymer containing water, while the reaction without the polymer did not proceed.     

Preparation and characteristics of photocrosslinkable hydrophilic polymer having cinnamate moiety

The reaction of copolymer of N,N-dimethylacrylamide (DMAA) and bromoethyl methacrylate with potassium cinnamate produced water-soluble photosensitive polymers. Photosensitive polyDMAA films were irradiated with a 400 W high-pressure mercury lamp (λ > 280 nm) to produce crosslinked polymers, which were swollen in water. The degree of swelling was controlled by the irradiation time and content of cinnamate moieties in copolymers. Higher cinnamoylation and longer irradiation time resulted in higher yield of crosslinked polymers and less swellability. Partial degelation upon irradiation at λ ～ 254 nm was observed. The advantage of gelation via photodimerization over conventional chemical crosslinking methods is discussed in conjunction with biomedical applications. © 1992 John Wiley & Sons, Inc.