Detailed studies of a high-capacity electrode material for rechargeable batteries, Li2MnO3-LiCo(1/3)Ni(1/3)Mn(1/3)O2

Lithium-excess manganese layered oxides, which are commonly described by the chemical formula zLi(2)MnO(3)-(1-z)LiMeO(2) (Me = Co, Ni, Mn, etc.), are of great importance as positive electrode materials for rechargeable lithium batteries. In this Article, Li(x)Co(0.13)Ni(0.13)Mn(0.54)O(2-δ) samples are prepared from Li(1.2)Ni(0.13)Co(0.13)Mn(0.54)O(2) (or 0.5Li(2)MnO(3)-0.5LiCo(1/3)Ni(1/3)Mn(1/3)O(2)) by an electrochemical oxidation/reduction process in an electrochemical cell to study a reaction mechanism in detail before and after charging across a voltage plateau at 4.5 V vs Li/Li(+). Changes of the bulk and surface structures are examined by synchrotron X-ray diffraction (SXRD), X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectroscopy (SIMS). SXRD data show that simultaneous oxygen and lithium removal at the voltage plateau upon initial charge causes the structural rearrangement, including a cation migration process from metal to lithium layers, which is also supported by XAS. This is consistent with the mechanism proposed in the literature related to the Li-excess manganese layered oxides. Oxygen removal associated with the initial charge on the high voltage plateau causes oxygen molecule generation in the electrochemical cells. The oxygen molecules in the cell are electrochemically reduced in the subsequent discharge below 3.0 V, leading to the extra capacity. Surface analysis confirms the formation of the oxygen containing species, such as lithium carbonate, which accumulates on the electrode surface. The oxygen containing species are electrochemically decomposed upon second charge above 4.0 V. The results suggest that, in addition to the conventional transition metal redox reactions, at least some of the reversible capacity for the Li-excess manganese layered oxides originates from the electrochemical redox reaction of the oxygen molecules at the electrode surface.     

Design theory and experiment of acousto-optical tunable filter by use of flexural waves applied to thin optical fiber

Spectral response of acoustically induced microbending through thin optical fiber is discussed from mode-coupling of core and cladding modes. The thin fiber is analyzed in three-layered structure (core-cladding-air) to gain insights into acousto-optic modulation. We explained the dependence of core and/or cladding diameters on acoustic source parameters from numerical calculations. According to the calculations, we successfully fabricated all-optical tunable filter using this thin fiber that yields an efficient mode-coupling at flexural wave frequencies less than 1MHz. To increase the acousto-optic effect, we used a specially designed thin optical fiber (80 μm of cladding diameter) in the section where flexural wave is produced, and spliced both ends of the thin fiber to the tapered 125 μm fibers. The frequency and voltage tuning of fabricated filter is also confirmed by changing the driven frequency and applied voltage of the PZT, respectively. This result suggests a possibility of fiber-optic device application as all-optical tunable filter at 1.55 μm.     

Remarkable emissions in diprotonated 2,2′:6′,2″‐terpyridine derivatives

A series of new metal‐free blue emission compounds, i.e., diprotonated terpyH₂ClPF₆ ( 1 ), tterpyH₂ClPF₆ ( 2 ), ClterpyH₂ClPF₆ ( 3 ), and BterpyH₂(PF₆)₂ ( 4 ), were prepared and characterized by electrospray ionization mass spectrometry, UV–vis spectroscopy, and cyclic voltammetry (CV). Abbreviations used are terpy = 2,2′:6′,2″‐terpyridine, tterpy = 4′‐(4‐tolyl)‐2,2′:6′,2″‐terpyridine, Clterpy = 4′‐chloro‐2,2′:6′,2″‐terpyridine, and Bterpy = 4,4′,4″‐tert‐butyl‐2,2′:6′,2″‐terpyridine. The X‐ray crystal structures of the three new compounds 1, 2, and 4 were determined. Both protonated pyridine rings of the terpyridine derivatives are hydrogen bonded intermolecularly to the adjacent Cl^? ion in compounds 1 , 2, and 3 . The π–π* absorption bands in the UV region for 1, 2, 3, and 4 in acetonitrile were red‐shifted relative to those of the corresponding neutral compounds. All the compounds exhibited stronger emissions (around 400 nm) than their neutral counterparts. All the CVs for the diprotonated species, terpyH, tterpyH, ClterpyH, and BterpyH, showed the first reduction waves around ?0.6 V, which were more positive than those of the neutral ones. Density functional theory was applied to interpret the remarkable differences in the interaction of the Cl^? ion. The attachment of two protons to the two terminal Bterpy nitrogens in 4 elicits remarkable characteristics. Both positive charges on the nitrogens are delocalized over the conjugated pyridine systems and the tertiary carbonium ions are stabilized to lead to stronger emission (Φ = 0.35) than the corresponding neutral Bterpy (Φ = 0.045). CCDC 732045–732047 contains the supplementary crystallographic data for this paper. These data can be obtained free of charge from the Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif Copyright © 2010 John Wiley & Sons, Ltd.     

Gravitational Effects on Mixing and Growth Morphology of an In0.5Ga0.5 System

A mixing experiment of multicomponents melts was performed using a uniform temperature furnace in the Second International Microgravity Laboratories (IML-2) mission. Growth morphologies and Ga concentration profiles were analyzed for the samples with the compositional ratio of 0.5 In–0.5 Ga–1.0 Sb grown under microgravity and on earth. The sample with free surface grown under microgravity was nearly spherical in shape, except some parts with projections. Ga was dispersed homogeneously in the bulk because the mixing was enhanced by Marangoni convection due to the concentration gradient. On the other hand, the sample grown on earth was a double cylindrical shape with different diameters, and Ga concentration decreased from top to bottom, showing clearly the effect of gravity. Many needle crystals were formed in both space and earth samples due to rapid cooling. The average size of the needle crystals grown in space was larger than that of the earth sample.     

Storage Modulus and Surface Morphology of Poly(vinyl alcohol)/Alumina Hybrid Hydrogels

The storage moduli, shear moduli and surface morphologies of poly(vinyl alcohol) (PVA) and alumina hybrid hydrogels were investigated. The storage moduli of hybrid hydrogels with higher alumina contents were found to be 1.5 times higher than those of PVA gels. This increase in modulus might be attributed to the cohesion of alumina to the PVA network.

SEM photograph of Al7 PVA/alumina hybrid hydrogel. The photograph was taken with a magnification of × 220.