Direct patterning of copper on polyimide using ion exchangeable surface templates generated by site-selective surface modification

We demonstrate site-selective chemical surface modification by dispensing potassium hydroxide solution onto polyimide, which confines source metallic ions that can subsequently be used in resist- and mask-free fabrication of copper circuit patterns. Metallization can be achieved by a wet chemical method, providing control over metal/polymer interfacial structures. Because the approach is compatible with other existing printing technologies and much simpler than conventional lithography-based methods, we propose that the present surface template method may be of general application in fabrication of metallized polymers as well as in development of integrated circuits with a variety of electronic circuit elements.     

Determination of benzoyl peroxide and benzoic acid in wheat flour by high-performance liquid chromatography and its identification by high-performance liquid chromatography-mass spectrometry

An HPLC method on C18 column using a gradient mobile phase is proposed for the separate determination of residual benzoyl peroxide (BP) and benzoic acid (BA) in flour and wheat products. The recoveries obtained were quite excellent, from 96.0 to 99.3% for BP added to the flour, and 91.3% for BA added to the flour. Analysis of 10 samples of commercial foods such as flour and wheat products, detected 0.7 microg/g of BP in imported noodles. Furthermore, we successfully verified the existence of BP by LC-MS. These methods are simple and reliable for determination and verifying the amount of BP and BA in foods since now the use of BP as a food additive is permitted in many countries.     

Processing and Properties of Inorganic-Organic Hybrids Containing Various Inorganic Components

Inorganic-organic hybrids containing various inorganic components have been synthesized from silanol-terminated polydimethylsiloxane (PDMS) and three different inorganic components: Al(O-sec-C4H9)3, Ti(OC2H5)4 and Ta(OC2H5)5. The hybrids obtained were transparent and flexible. Dynamic mechanical measurements and stress-strain experiments were carried out in order to study the effect of inorganic component on the properties of the Metal-O-PDMS hybrids. The storage modulus at around room temperature increased in the order Al-O-PDMS, Ti-O-PDMS, Ta-O-PDMS hybrids, indicating that the three-dimensional network structure became denser in this order. The tensile strength increased in the order Al-O-PDMS, Ta-O-PDMS, Ti-O-PDMS hybrids. The difference in tensile strength is considered to be related to the strength of the interaction between the inorganic component and PDMS. The elongation at failure also depended on the inorganic component. Ti-O-PDMS hybrid exhibited the largest elongation of all the samples (more than 200%).     

An oligopeptide containing the C-terminal sequence of RNase a has a potent RNase a binding property

We demonstrate that an oligopeptide containing the C-terminal sequence of RNase A binds to RNase A in a stoichiometric and site-specific manner. Our observations are consistent with the interaction found in the major domain-swapped RNase A dimer, so that the peptide binding may be promoted through the swapping with the C-terminal beta-sheet of RNase A. Because the design of a protein-binding peptide is much simpler than other methods such as the combinatorial method, we propose that investigation using an oligopeptide may be of general application to domain swapping in proteins as well as for the development of an oligopeptide tool that specifically binds to a target protein.     

Extraordinarily large swelling energy of iodine‐treated poly(vinyl alcohol) demonstrated by jump of a film

Organic material characteristics of volume change and stress generation have attracted the attention of many researchers aiming to develop chemomechanical systems such as artificial muscles and polymer engines having the advantages of high energy density and silent operation. Although polymer gels offer a relatively large actuator stroke, their mechanical properties are relatively poor and the working temperature is relatively low, often limited by the evaporation of liquid if contained. We have developed an iodine‐treated poly(vinyl alcohol) having extraordinarily large vapor‐induced deswelling stress reaching 59 MPa, which is one to two orders of magnitude greater than those of ordinary polymer gels. Furthermore, this material has extremely large volumetric and gravimetric energy densities reaching 1.3 × 10⁶ J m^?3 and 9.6 × 10² J kg^?1, respectively, and an elastic modulus of a few GPa and is heat‐resistant to at least 200 °C. The high performance of this material can be demonstrated by a jump of a film. © 2014 The Authors. Journal of Polymer Science Part B: Polymer Physics published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1357–1365     

A metallic (EDT-DSDTFVSDS)2.FeBr4 salt: antiferromagnetic ordering of d spins of FeBr4- ions and anomalous magnetoresistance due to preferential pi-d interaction

The 2:1 salt of a new donor molecule, EDT-DSDTFVSDS with FeBr4- ion, (EDT-DSDTFVSDS)2.FeBr4 showed an essentially metallic behavior despite a small upturn in the electrical resistance below ca. 30 K (electrical conductivities at 290 and 4.2 K are 200 and 170 S cm-1, respectively). The Fe(III) d spins of the FeBr4- ions in this salt were subject to antiferromagnetic ordering at 3.3 K by virtue of a strong pi-d interaction (Jpid) which is comparable to that in a molecular metallic conductor, lambda-(BETS)2.FeCl4, and of a very weak d-d interaction (Jdd). This strong pi-d interaction was evidenced by a large and negative magnetoresistance effect (ca. 20% at 5 T) as well as by the appearance of a large dip in the resistance at the magnetic field (ca. 2.0 T) parallel to the easy axis for the spin-flop transition of the Fe(III) d spins.     

Comparison of the compact dry EC with the most probable number method (AOAC official method 966.24) for enumeration of Escherichia coli and coliform bacteria in raw meats. Performance-Tested Method 110402

Compact Dry E. coli/Coliform Count (EC) is a ready-to-use test method for the enumeration of Escherichia coli and coliform bacteria in food. The plates are presterilized and contain culture medium and a cold water-soluble gelling agent. The medium should be rehydrated with 1 mL diluted sample inoculated onto the center of the self-diffusible medium, allowing the solution to diffuse by capillary action. The plate can be incubated at 35 degrees C for 20-24 h and the colonies counted without any further working steps. The Compact Dry EC medium plates were validated as an analysis tool for determining colony-forming units (CFU) of E. coli and coliform bacteria from a variety of raw meats using 5 different types of raw meats. The performance tests were conducted at 35 degrees C. In all studies performed, no apparent differences were observed between the Compact Dry EC method and the AOAC Official Method 966.24 results. For the accuracy claim (n = 75), a correlation factor of r2 = 0.93 (E. coli) and r2 = 0.93 (coliform bacteria) could be assigned, as stated in the application for "Performance-Tested Method."     

Rational Design of Modular Polyketide Synthases: Morphing the Aureothin Pathway into a Luteoreticulin Assembly Line

The unusual nitro‐substituted polyketides aureothin, neoaureothin (spectinabilin), and luteoreticulin, which are produced by diverse Streptomyces species, point to a joint evolution. Through rational genetic recombination and domain exchanges we have successfully reprogrammed the modular (type I) aur polyketide synthase (PKS) into a synthase that generates luteoreticulin. This is the first rational transformation of a modular PKS to produce a complex polyketide that was initially isolated from a different bacterium. A unique aspect of this synthetic biology approach is that we exclusively used genes from a single biosynthesis gene cluster to design the artificial pathway, an avenue that likely emulates natural evolutionary processes. Furthermore, an unexpected, context‐dependent switch in the regiospecificity of a pyrone methyl transferase was observed. We also describe an unprecedented scenario where an AT domain iteratively loads an extender unit onto the cognate ACP and the downstream ACP. This aberrant function is a novel case of non‐colinear behavior of PKS domains.     

CO2‐Induced Spin‐State Switching at Room Temperature in a Monomeric Cobalt(II) Complex with the Porous Nature

CO₂‐responsive spin‐state conversion between high‐spin (HS) and low‐spin (LS) states at room temperature was achieved in a monomeric cobalt(II) complex. A neutral cobalt(II) complex, [Co^II(COO‐terpy)₂]?4 H₂O ( 1?4 H₂O ), stably formed cavities generated via π–π stacking motifs and hydrogen bond networks, resulting in the accommodation of four water molecules. Crystalline 1?4 H₂O transformed to solvent‐free 1 without loss of porosity by heating to 420 K. Compound 1 exhibited a selective CO₂ adsorption via a gate‐open type of the structural modification. Furthermore, the HS/LS transition temperature (T_1/2) was able to be tuned by the CO₂ pressure over a wide temperature range. Unlike 1 exhibits the HS state at 290 K, the CO₂‐accomodated form 1?CO₂ (P =110 kPa) was stabilized in the LS state at 290 K, probably caused by a chemical pressure effect by CO₂ accommodation, which provides reversible spin‐state conversion by introducing/evacuating CO₂ gas into/from 1 .     

Biphasic electrochemical peptide synthesis

The large amount of waste derived from coupling reagents is a serious drawback of peptide synthesis from a green chemistry viewpoint. To overcome this issue, we report an electrochemical peptide synthesis in a biphasic system. Anodic oxidation of triphenylphosphine (Ph₃P) generates a phosphine radical cation, which serves as the coupling reagent to activate carboxylic acids, and produces triphenylphosphine oxide (Ph₃P O) as a stoichiometric byproduct. In combination with a soluble tag-assisted liquid-phase peptide synthesis, the selective recovery of desired peptides and Ph₃P O was achieved. Given that methods to reduce Ph₃P O to Ph₃P have been reported, Ph₃P O could be a recyclable byproduct unlike byproducts from typical coupling reagents. Moreover, a commercial peptide active pharmaceutical ingredient (API), leuprorelin, was successfully synthesized without the use of traditional coupling reagents.

The large amount of waste derived from coupling reagents is a serious drawback of peptide synthesis from a green chemistry viewpoint.