Spontaneous racemization and epimerization behavior in solution of chiral nitroxides

[reaction: see text] Enantiomerically enriched samples of chiral cyclic nitroxides with a 4-hydroxyphenyl group on the stereogenic center bearing the NO radical group undergo unprecedented spontaneous racemization and/or epimerization in aprotic solvents, which can be well accounted for by the multistep equilibrations involving planar quinoid intermediates.     

Observation of the Fano-Kondo antiresonance in a quantum wire with a side-coupled quantum dot

We have observed the Fano-Kondo antiresonance in a quantum wire with a side-coupled quantum dot. In a weak coupling regime, dips due to the Fano effect appeared. As the coupling strength increased, conductance in the regions between the dips decreased alternately. From the temperature dependence and the response to the magnetic field, we conclude that the conductance reduction is due to the Fano-Kondo antiresonance. At a Kondo valley with the Fano parameter q approximately 0, the phase shift is locked to pi/2 against the gate voltage when the system is close to the unitary limit in agreement with theoretical predictions by Gerland et al. [Phys. Rev. Lett. 84, 3710 (2000)].     

Observation of "partial coherence" in an Aharonov-Bohm interferometer with a quantum dot

We report experiments on the interference through spin states of electrons in a quantum dot (QD) embedded in an Aharonov-Bohm (AB) interferometer. We have picked up a spin-pair state, for which the environmental conditions are ideally similar. The AB amplitude is traced in a range of gate voltage that covers the pair. The behavior of the asymmetry in the amplitude around the two Coulomb peaks agrees with the theoretical prediction that the spin-flip process in a QD is related to the quantum dephasing of electrons. These results constitute evidence of "partial coherence" due to an entanglement of spins in the QD and in the interferometer.     

Controlled production of monodisperse double emulsions by two-step droplet breakup in microfluidic devices

A microfluidic device having both hydrophobic and hydrophilic components is exploited for production of multiple-phase emulsions. For producing water-in-oil-in-water (W/O/W) dispersions, aqueous droplets ruptured at the upstream hydrophobic junction are enclosed within organic droplets formed at the downstream hydrophilic junction. Droplets produced at each junction could have narrow size distributions with coefficients of variation in diameter of less than 3%. Control of the flow conditions produces variations in internal/external droplet sizes and in the internal droplet number. Both W/O/W emulsions (with two types of internal droplets) and oil-in-water-in-oil emulsions were prepared by varying geometry and wettability in microchannels.     

Beam-polarization asymmetries for the p(gamma-->, K+)Lambda and p(gamma-->, K+)Sigma(0) reactions for E(gamma)=1.5-2.4 GeV

Beam polarization asymmetries for the p(gamma-->,K+)Lambda and p(gamma-->,K+)Sigma(0) reactions are measured for the first time for E(gamma)=1.5-2.4 GeV and 0.6相似文献   

A new strategy for the design of water-soluble synthetic receptors: specific recognition of DNA intercalators and diamines

Water-soluble zinc bisporphyrin receptors 1 and 2 having two Lewis acidic sites (zinc) in the hydrophobic environment consisting of alkyl chains and a bisporphyrin framework, and covered with hydrophilic exterior (twelve or eighteen carboxyl groups) were prepared. The receptors show high affinity for diamines and DNA intercalators in water where the binding constants K(a) are of the order of 10(7) and 10(8) M(-1), respectively. Diamines and DNA intercalators are bound to the receptor through different mechanisms. Diamines are bound through hydrophobic interactions and zinc-nitrogen interactions, while DNA intercalators are bound through hydrophobic interactions and charge-transfer interactions. Flexible alkyl chains can make van der Waals contact with guests and create a hydrophobic environment around the bound guest by an induced-fit-type mechanism. For the binding of DNA intercalators, the following features are noteworthy: 1). Binding constants are similar between the zinc porphyrins and zinc-free porphyrins; 2). the binding constant is larger for the guest having the lower LUMO; this indicates the important contribution of charge-transfer interactions to binding; 3). the hydrophobic and cationic nature of DNA intercalators is substantially important, and 4). higher ionic strength reduced the binding affinities; this shows a moderate contribution of electrostatic interactions. The conformational instability of the receptors also contributes to the tight binding: hydrophobic and electrostatic interactions cannot both be favorable at the same time in the guest-free receptor. Enthalpy-entropy compensation observed for the binding of diamines and DNA intercalators is characterized by a relatively small slope (alpha=0.74) and a large intercept (beta=7.75 kcal mol(-1)) in the DeltaH degrees versus TDeltaS degrees plot; this shows that a conformational change of receptors and a significant desolvation occur upon binding. The receptor can competitively bind to propidium iodide to deprive DNA of the intercalated propidium iodide. These features of water-soluble receptors consisting of a rigid framework and flexible side chains with a large solvent-accessible area are in contrast to highly preorganized rigid receptors, and they can provide useful guidelines for rational design of induced-fit artificial receptors in water.     

NMR analysis of lignins in CAD-deficient plants. Part 1. Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins

Peroxidase/H2O2-mediated radical coupling of 4-hydroxycinnamaldehydes produces 8-O-4-, 8-5-, and 8-8-coupled dehydrodimers as has been documented earlier, as well as the 5-5-coupled dehydrodimer. The 8-5-dehydrodimer is however produced kinetically in its cyclic phenylcoumaran form at neutral pH. Synthetic polymers produced from mixtures of hydroxycinnamaldehydes and normal monolignols provide the next level of complexity. Spectral data from dimers, oligomers, and synthetic polymers have allowed a more substantive assignment of aldehyde components in lignins isolated from a CAD-deficient pine mutant and an antisense-CAD-downregulated transgenic tobacco. CAD-deficient pine lignin shows enhanced levels of the typical benzaldehyde and cinnamaldehyde end-groups, along with evidence for two types of 8-O-4-coupled coniferaldehyde units. The CAD-downregulated tobacco also has higher levels of hydroxycinnamaldehyde and hydroxybenzaldehyde (mainly syringaldehyde) incorporation, but the analogous two types of 8-O-4-coupled products are the dominant features. 8-8-Coupled units are also clearly evident. There is clear evidence for coupling of hydroxycinnamaldehydes to each other and then incorporation into the lignin, as well as for the incorporation of hydroxycinnamaldehyde monomers into the growing lignin polymer. Coniferaldehyde and sinapaldehyde (as well as vanillin and syringaldehyde) co-polymerize with the traditional monolignols into lignins and do so at enhanced levels when CAD-deficiency has an impact on the normal monolignol production. The implication is that, particularly in angiosperms, the aldehydes behave like the traditional monolignols and should probably be regarded as authentic lignin monomers in normal and CAD-deficient plants.     

Efficient synthesis of 2,4-disubstituted 1,2,4-benzothiadiazin-3-one 1,1-dioxides on solid support

The first solid-phase synthesis of 1,2,4-benzothiadiazin-3-one 1,1-dioxides has been developed. Synthesis of the title compounds was achieved by the reduction of 2-nitrobenzenesulfonamides, followed by cyclization with carbonyldiimidazole. Because 1,2,4-benzothiadiazin-3-one 1,1-dioxides have been known to possess various bioactivities, this method is useful from the viewpoint of new drug discovery. In addition to the excellent purity of the title compounds, a large number of compounds can be synthesized with this method, because this synthesis includes four diversity points.     

Thermally responsive wettability of self-assembled methylcellulose nanolayers

Thermo-responsive cellulosic nanolayers were prepared from methylcellulose (MC), which is known to have a unique lower critical solution temperature. Thiosemicarbazide (TSC) was selectively introduced into the MC reducing end groups, and the corresponding MC-TSC derivative was spontaneously chemisorbed on an Au substrate at 4 °C to give MC self-assembled monolayers (SAMs). Linear MC chains were stably fixed onto the Au substrate, yielding an MC-SAM of thickness ca. 15 nm with a root mean square value less than 1 nm. The MC-SAM surface exhibited thermally responsive wetting characteristics; the water contact angle was found to rise and fall around 70 °C, possibly due to the solid-state phase transition of the MC nanolayers resulting from the inherent gelation of MC molecules in water. Such wetting behavior was shown to be reversible following repeated heating and cooling. The MC-SAM immersed in salt solution revealed lower phase transition temperatures, and an increase in sodium chloride concentration ranging from 0.0 to 1.0 M brought about a dramatic decrease in the apparent phase transition temperature from ca. 70 to 30 °C. For the purposely designed MC nanolayers, such controllable wetting properties are expected to prompt growing interest in the applications of cellulosic biopolymer interfaces.