A facile synthesis of aliphatic polybenzoxazoles from a bis(o-aminophenol) or its hydrochloride and aliphatic dinitriles

A facile one-step method for the synthesis of aliphatic polybenzoxazoles has been developed. Thus, a series of aliphatic polybenzoxazoles having inherent viscosities of 0.2–0.7 dL/g in concentrated sulfuric acid were successfully synthesized by the melt polycondensation of alipatic dinitriles with 4,4′-diamino-3,3′-dihydroxybiphenyl (AHB) or its hydrochloride (AHB–HCl) with the elimination of ammonia or ammonium chloride, respectively. Monomer AHB–HCl was more reactive than the parent AHB, thereby affording higher molecular weight polybenzoxazoles in a shorter reaction time. The aliphatic polybenzoxazoles having 6–10 methylene units were highly crystalline with melting temperatures in the range of 187–308°C, which were stable up to 400°C in a melt state in nitrogen. © 1994 John Wiley & Sons, Inc.     

Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers

New segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers were synthesized by the chain extension of α,w-diamine-terminated poly(ether sulfone) oligomer with both aromatic dicarboxylic acid chlorides and tetracarboxylic dianhydrides, respectively. Crystallization of the poly(ether sulfone)unit was suppressed by the introduction of amide or imide linkage along the polymer backbone, giving amorphous copolymers that were +eadily soluble in various organic solvents. The copolymers had somewhat higher glass transition temperatures than the parent poly(ether sulfone). They afforded transparent and tough films by solution casting. © 1992 John Wiley & Sons, Inc.     

Preparation and properties of poly(imide-oxoisoindolobenzothiadiazine dioxides)

New thermally stable poly(imide-oxoisoindolobenzothiadiazine dioxides) (PIOD) have been prepared by the three-step cyclopolycondensation reaction of diaminobenzenesulfonamides with aromatic tetracarboxylic dianhydrides. The polymerization proceeded through the formation of poly(amic acid-sulfonamides) (PAAS), followed by cyclodehydration to yield polyimide-sulfonamides (PIS), which were subsequently converted to PIOD at 300°C. PAAS having inherent viscosities in the range of 0.1–0.5 in N-methyl-2-pyrrolidone (NMP) were obtained in approximately quantitative yield. PIOD were insoluble in most organic solvents, whereas PAAS and PIS were soluble in NMP and dimethyl sulfoxide. Differential thermal analysis and thermogravimetric analysis indicated that PIOD began to decompose at 460°C in air. The cyclodehydration of the model compounds was also investigated.     

Synthesis of inorganic-organic hybrids by incorporation of inorganic components into organic polymer using metal alkoxides

Inorganic-organic hybrids have been synthesized by incorporation of the inorganic component of Ti(OC₂H₅)₄ into the organic polymer of ethyl cellulose. The inorganic-organic hybrids did not dissolve in toluene used as a solvent for the starting materials. The ethanol was formed as a by-product of the alcoholysis condensation reaction between Ti(OC₂H₅)₄ and ethyl cellulose. These results suggest that ethoxy groups of Ti(OC₂H₅)₄ react with hydroxy groups of ethyl cellulose to form cross-linking bonds of –O–Ti–O–. The reaction of Ti(OC₂H₅)₄ with ethyl cellulose was further investigated by Fourier transform infrared (FT-IR) spectroscopy. The FT-IR spectroscopic experiments revealed that the Ti–O bond state of Ti(OC₂H₅)₄ was changed by refluxing a toluene solution of Ti(OC₂H₅)₄ with ethyl cellulose. The inorganic-organic hybrids have an interesting dielectric property; their dielectric constant is higher than that of ethyl cellulose and that of a simple mixture of TiO₂ and ethyl cellulose.     

Novel ring transformation reactions of xanthine derivatives

The novel ring transformation reactions were found in the reactions of 1,3,7,9-tetra-alkyl-8,9-dihydroxanthines and acetylenic compounds. The reaction of the dihydroxanthine with DMAD gave a propellane type compound and with methyl propiolate afforded the similar type compound and a pyrimido[4,5-b]diazepine derivative. The mechanism of these reactions was also discussed.     

Determination of heat of mixing and heat of vaporization with a differential scanning calorimeter

A simple method is presented for measuring the heat of mixing and the heat of vaporization of volatile liquids at temperatures below their boiling point. It consists in introducing liquids by a microsyringe into a nearly closed cell of the DSC. The relative standard deviation for 4 to 5 runs is ca. 5% for heat of mixing and ca. 2% for heat of vaporization.     

Further studies on the reaction of amines and proteins with 4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole

The reaction of glycine with NBD-F (4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole) is investigated to establish conditions that provide a high formation rate of NBD-glycine and a low hydrolysis rate of the reagent. The reaction rate increases with higher temperature, larger contents of organic solvent and a sodium borate buffer. The use of borate buffer decreases ther ate of hydrolysis of the reagent. For low-molecular-weight amines, condition for a suitable liquid chromatographic postcolumn reactor include a high content of acetonitrile and 0.1 M sodium borate (pH 8.0–8.5). For proteins, separated by molecular-exclusion chromatography, water is needed for sensitive reactions. Suitable postcolumn reactor conditions include borate buffer (pH 7.9) containing 0.1 M potassium chloride, a 0.02% (w/v) NBD-F solution in acetonitrile with reaction at 50°C for about 45 s. The detection limits for human serum albumin, β-lactoglobulin and myoglobin are 6.6 pmol, 8.4 pmol and 11 pmol, respectively.     

Circularly polarized luminescence (CPL) characteristics of hydrophobic pyrene derivatives/γ-cyclodextrin (γ-CD) complexes in aqueous solution dissolved by grinding

Circularly polarized luminescence (CPL) organic dyes are currently receiving a great interest, but there are still not many reported observations of CPL spectra of hydrophobic dyes from aqueous solution. We have prepared hydrophobic pyrene derivatives and dissolved them into aqueous solutions with γ-cyclodextrin (γ-CD) by using grinding technique. Among these derivatives, (pyrene-1-carbonyl)serine (PySer) forms a spatially restricted dimer in the hydrophobic chiral cavity of γ-CD and exhibits excimer emission with a high quantum yield of Φ_f?=?0.68. In addition, circular dichroism and CPL signals were induced for the complex. The strong g_CPL value of g_CPL?=?+?2.2?×?10^?3 was obtained, which may be attributed to the interaction between the hydroxyl groups in the side chain of PySer with those of γ-CD and it strengthens the chiral dimeric structure.

Graphic abstract

     

Measurement of the product ion ratio N4+/N3+ in the radiolysis of nitrogen

The ratio of N₄⁺ to N₃⁺ formed in the radiolysis of gaseous nitrogen has been measured to be 4.7 ± 0.4 using a time-resolved atmospheric pressure ionization mass spectrometer. The limit of error has been evaluated from the ion mass discrimination of the apparatus.