Observation of no significant surface enhancement of Raman scattering from benzoic acid molecules on mercury

There is controversy regarding the surface enhancement of Raman scattering due to liquid Hg, and the enhancement of benzoic acid molecules adsorbed on liquid Hg has been determined to be essentially zero. However, if the noise error bar is taken into account, the maximum enhancement is estimated to be less than 30. The same enhancement was observed when the temperature was reduced in solidifying liquid Hg.     

金属纳米颗粒的热导率

本文使用统计模拟方法对金属纳米颗粒的电子平均自由程进行了计算,并考察了纳米颗粒的晶格比热和声子平均群速度,最后应用动力学理论对纳米颗粒的电子热导率和声子热导率分别进行了求解.研究结果表明:具有相同特征尺寸的方形、球形纳米颗粒的无量纲电子(或声子)平均自由程比较接近.金属纳米颗粒的电子热导率远大于声子热导率;电子、声子热导率随着直径减小呈现降低趋势,而电子热导率的颗粒尺度依赖性比声子热导率更为明显;随着颗粒直径进一步减小,声子热导率与电子热导率趋于同一数量级.当纳米颗粒特征尺寸大于4倍块材电子(或声子)平均自由程,其电子(或声子)热导率的颗粒尺度依赖性将减弱.     

Polycarbonate nanoparticles spray coated on silicon substrate using micro-electromechanical-systems-based high-frequency ultrasonic nozzle

Mono-disperse polycarbonate (PC) nanoparticles 20 nm in diameter was spray coated on silicon substrate using a novel high-frequency ultrasonic nozzle. Specifically, Bisphenol-A polycarbonate with a molecular weight (M_w) of approximately 6.4 × 10⁴ g/mol was first dissolved in pyridine. The resulting solution was sprayed into surfactant-containing de-ionized (DI) water using a 300 kHz silicon-based multiple-Fourier horn nozzle (MFHN). As pyridine was extracted into the water, PC nanoparticles formed but remained dispersed. This suspension of PC nanoparticles was then sprayed onto a silicon substrate using a 500 kHz 3-Fourier horn nozzle. Scanning electron microscopy (SEM) of the dried substrate revealed that PC nanoparticles were spread uniformly with no aggregation.     

White light electroluminescence from graphene‐enhanced single polymer comprising two color emitters of equal molar ratios

White polymeric light‐emitting diode (WPLED) based on a single polymer, poly(3‐hexylthiophene‐alt‐9,9‐dioctylfluorene) (PTAF), has been successfully demonstrated. This conjugated alternating copolymer, PTAF, comprises 50 mol % of 3‐hexylthiophene which is an orange‐red color chromophore and 50 mol % 9,9‐dioctylfluorene which is a bluish‐green color chromophore. It was synthesized by Suzuki cross‐coupling reaction and has a molecular weight of 15,021 and polydispersity of 1.36. Nanocomposite consisting PTAF and graphene nanosheets enhances the optoelectronic properties and the device fabricated with a configuration of ITO/PEDOT:PSS/(PTAF + 1% graphene)/Ca/Al shows two‐color white electroluminescence with CIE 1931 coordinates of (0.28, 0.34). The white luminescence from a single polymer affords the WPLED device a simple structure and low fabrication cost. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Mechanical and optoelectric properties of post-annealed fluorine-doped tin oxide films by ultraviolet laser irradiation

The fluorine-doped tin oxide (FTO) thin film deposited on a soda-lime glass substrate was annealed by a defocus ultraviolet (UV) laser irradiation at ambient temperature. The mechanical and optoelectric properties of FTO films annealed by using the various laser processing parameters were reported. After the FTO films were subjected to laser post-annealing, the microhardness were slightly less but the reduced modulus values were larger than that of unannealed FTO films, respectively. The average optical transmittance in the visible waveband slightly increased with increasing the laser annealing energy and scan speed. Moreover, all the sheet resistance of laser annealed films was less than that of the unannealed ones. We found that the sheet resistance decrease was obviously influenced by annealing. The suitable annealing conditions could maintain the film thickness and relief the internal stress generated in the film preparation process to improve the electrical conductivity via decreasing laser energy or increasing scan speed.     

2,7-Bis(1H-pyrrol-2-yl)ethynyl-1,8-naphthyridine: an ultrasensitive fluorescent probe for glucopyranoside

[structure: see text] A push-pull conjugated molecule, 2,7-bis(1H-pyrrol-2-yl)ethynyl-1,8-naphthyridine (BPN), has been designed to bind selectively with octyl glucopyranoside (OGU). The BPN/OGU quadruple hydrogen-bonding complex adopts a rigid BPN conformation in which the proton donor (d) and acceptor (a) relays (daad) are resonantly conjugated through the ethynyl bridge, inducing pi-electron delocalization, i.e., a charge transfer effect. The excellent photophysical properties make BPN a highly sensitive probe for monitoring glucopyranoside to a detection limit of approximately 100 pM.     

Electron-hole coupling and the charge density wave transition in TiSe2

Angle-resolved photoemission is employed to measure the band structure of TiSe2 in order to clarify the nature of the ( 2 x 2 x 2) charge density wave transition. The results show a very small indirect gap in the normal phase transforming into a larger indirect gap at a different location in the Brillouin zone. Fermi surface topology is irrelevant in this case. Instead, electron-hole coupling together with a novel indirect Jahn-Teller effect drives the transition.     

Effect of the Interface Component on Current-voltage Curves of a Composite Bipolar Membrane for Water and Methanol Solutions

The current-voltage curves of a composite bipolar membrane (CBM) were experimentally measured by varying the interface component between cation- and anion-exchange membranes for water and methanol solutions. In each solution system, 0.05 mol/l LiCl was used as the electrolyte. The interface component was varied by pasting the polymers or installing the thin membranes in the intermediate region of the CBM. The measured results show that the functional groups of the polymers and thin membranes enhanced the water and methanol splitting effect. This phenomenon can be explained by the protonation-deprotonation reactions occurring between these functional groups and the water or methanol molecules in the intermediate region of the CBM. The effect of transition metal compounds existing in the intermediate region of the CBM was also experimentally examined in this study. It was found that the effect of transition metal compounds on water or methanol splitting was not obvious. Copyright 1999 Academic Press.