Recovery and refining of au by gold-cyanide ion biosorption using animal fibrous proteins

Animal fibrous proteins (AFPs) such as egg-shell membrane (ESM), chicken feather (CF), wool, silk, or elastin are an intricate network of stable and water-insoluble fibers with high surface area and are abundant bioresources. Every AFP tested was found to accumulate gold-cyanide ion from aqueous solutions in high yield, depending on pH and some other parameters. Gold-cyanide ion is adsorbed by AFP at low pH range, with maximum binding observed at approx pH 2.0. Under the certain conditions, gold-cyanide ion was accumulated up to 8.6, 7.1, 9.8, 2.4, and 3.9% of dry weight on ESM, CF, wool, silk, and elastin, respectively. In the case of ESM, it was found that ESM removed gold-cyanide ion almost quantitatively and almost all the gold uptake by ESM was easily desorbed with 0.1M NaOH. ESM can be used repeatedly for the process of gold adsorption-desorption. The gold-biosorptive capacity of ESM that was chemically modified with glutaraldehyde was higher than that of control. In column procedure, ESM packed on column removed gold-cyanide ion from the dilute aqueous solution to extremely low concentrations (nondetectable concentration of below 1 ppb)     

Ni(II)- and Co(II)-phosphine complex catalyzed carboncarbon bond formation between organic tellurides and grignard reagents

Treatment of alkenyl and aryl tellurides with Grignard reagents in the presence of NiCl₂(PPh₃)₂, NiCl₂(Ph₂PCH₂CH₂CH₂PPh₂), or CoCl₂(PPh₃)₂ as catalyst affords the cross-coupling products together with the homo-coupling products of the tellurides in good to moderate yields under mild conditions.     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.     

Optically active 1,2-bis(1-arylhydroxymethyl) ferrocene: a new, efficient chiral ligand for scandium-catalyzed asymmetric Diels-Alder reaction

[reaction: see text] The Sc(OTf)3/FERRODIOL (2) complex was prepared at -78 degrees C in CH2Cl2 in the presence of 2,6-lutidine and MS 4A. The chiral scandium Lewis acid-catalyzed asymmetric Diels-Alder reaction of cyclopentadiene (3) with 3-acyloxazolidin-2-ones (4) effectively produced the adduct (5) in a high yield with good selectivity, i.e., endo/exo = 90:10 up to 91% ee (endo).     

Development of Odorless Thiols and Sulfides and Their Applications to Organic Synthesis

Summary. Development of new odorless thiols (dodecanethiol, 4-n-heptylphenylmethanethiol, 4-trimethylsilylphenylmethanethiol, 4-trimethylsilylbenzenethiol) and an odorless sulfide (1-methylsulfanyldodecane) and their applications to dealkylation, Michael addition, Swern oxidation, and Corey-Kim oxidation are described.     

A large thermal hysteresis loop produced by a charge-transfer phase transition in a rubidium manganese hexacyanoferrate

In a rubidium manganese hexacyanoferrate, RbMn[Fe(CN)(6)], the magnetic susceptibility (chi(M)) decreased at 225 K (=T(1/2)decreasing) and abruptly increased at 300 K (=T(1/2)increasing) in the cooling and warming processes, respectively. X-ray photoelectron spectroscopy and infrared spectroscopy indicated that the high-temperature (HT) and low-temperature (LT) phases were composed of Mn(II)-NC-Fe(III) and Mn(III)-NC-Fe(II), respectively. A structural change from cubic (F43m, a = 10.533 A) to tetragonal (I4m2, a = b = 7.090 A, c = 10.520 A) accompanied the phase transition, and, on the basis of these results, the HT and LT phases were assigned to Mn(II)(t(2g)(3)e(g)(2), (6)A(1g); S = (5)/(2))-NC-Fe(III) (t(2g)(5), (2)T(2g); S = (1)/(2)) and Mn(III)(e(g)(2)b(2g)(1)a(1g)(1), (5)B(1g); S = 2)-NC-Fe(II) (b(2g)(2)e(g)(4), (1)A(1g); S = 0), respectively. This phenomenon is caused by a metal-to-metal charge transfer from Mn(II) to Fe(III) and a Jahn-Teller distortion of the produced Mn(III) ion. The reaction mechanism is discussed, considering the entropy difference between the HT and LT phases.     

Supported molybdena catalysts: Characterization of oxidized,reduced, and sulfided MoO3 prepared by an adsorption method

Highly dispersed molybdena-titania catalyst can be prepared by an equilibrium adsorption method. In this method, molybdate anions adsorb onto the positively charged titania surfaces via electrostatic attraction by controlling the pH of the impregnating solution and they increase as an inverse function of the pH. ⁹⁵Mo-NMR and UV spectroscopic studies of impregnating solution show that the polymeric species like Mo₇O₂₄ ⁶-ions are adsorbed on titania in the acidic impregnating solution. XRD, Raman, and XPS data of the calcined samples show that mono-layer coverage of molybdenum oxide over-layer possesses a highly distorted MoO₆ group with a molecular geometry resembling the distorted square pyramid. The catalytic oxidation of methanol over the surface molybdate species on titania possesses higher turnover numbers and higher selectivities of partial oxidation products than the catalysts supported on alumina, silica, zirconia, or magnesia. Changes of the surface properties either after reduction and sulfiding treatment over monolayer catalyst on titania have also been investigated. The NO chemisorption and XPS studies show that two types of active sites appeared after reduction treatment: one site is active for hydrogenation of 1,3-butadiene and the other site is active for metathesis of propene. A higher degree coordinative unsaturations of MO is required for hydrogenation than metathesis. After sulfiding treatments of the catalyst, hydrogenation of 1,3-butadiene also requires triply coordinative unsaturation, and hydrogenolysis of thiophene requires the ensemble of doubly or triply coordinative unsaturations.     

Molar enthalpies of transfer of divalent transition metal lons and their chloro complexes from N,N-dimethylformamide to N,N-dimethylacetamide

The molar enthalpies of transfer _t H ^° of some divalent metal ions (M-Mn, Co, Ni and Zn) and their chloro complexes from N,N-dimethyl-for-mamide (DMF) to N,N-dimethylacetamide (DMA) have been determined using the tetraphenylarsonium-tetraphenylborate (TATB) assumption at 25°C. Although physicochemical properties of DMF and DMA as solvent are similar, the _t H ^°(M ²⁺) value increased significantly in the order Mnt H ^° values for the mono-and dichloro complexes showed also a strong metal dependence, while those for the triand tetrachloro complexes practically do not. These results can be reasonably explained in terms of steric hindrance upon solvation of the metal ions and complexes in DMA.     

Phase separation and extraction with acetonitrile for sample preparation in HPLC analysis

Summary Acetonitrile can be salted-out from aqueous solution by adding tetrabutylammonium perchlorate. This phase separation method has been used for the extraction of the Fe(III)-4,7-diphenylphenanthroline complex into acetonitrile followed by direct injection onto an ODS column. The Fe complex is separated by using 9:1 acetonitrile/water as a mobile phase. The proposed reversed-phase high-performance liquid chromatography has been applied to the determination of Fe in serum.     

Structural studies of the carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F: suggestion for the initial activation site for dihydrogen

The carbon monoxide complex of [NiFe]hydrogenase from Desulfovibrio vulgaris Miyazaki F has been characterized by X-ray crystallography and absorption and resonance Raman spectroscopy. Nine crystal structures of the [NiFe]hydrogenase in the CO-bound and CO-liberated forms were determined at 1.2-1.4 A resolution. The exogenously added CO was assigned to be bound to the Ni atom at the Ni-Fe active site. The CO was not replaced with H(2) in the dark at 100 K, but was liberated by illumination with a strong white light. The Ni-C distances and Ni-C-O angles were about 1.77 A and 160 degrees, respectively, except for one case (1.72 A and 135 degrees ), in which an additional electron density peak between the CO and Sgamma(Cys546) was recognized. Distinct changes were observed in the electron density distribution of the Ni and Sgamma(Cys546) atoms between the CO-bound and CO-liberated structures for all the crystals tested. The novel structural features found near the Ni and Sgamma(Cys546) atoms suggest that these two atoms at the Ni-Fe active site play a role during the initial H(2)-binding process. Anaerobic addition of CO to dithionite-reduced [NiFe]hydrogenase led to a new absorption band at about 470 nm ( approximately 3000 M(-1)cm(-1)). Resonance Raman spectra (excitation at 476.5 nm) of the CO complex revealed CO-isotope-sensitive bands at 375/393 and 430 cm(-1) (368 and 413 cm(-1) for (13)C(18)O). The frequencies and relative intensities of the CO-related Raman bands indicated that the exogenous CO is bound to the Ni atom with a bent Ni-C-O structure in solution, in agreement with the refined structure determined by X-ray crystallography.