Control of charge-transfer-induced spin transition temperature on cobalt-iron Prussian blue analogues

The electronic and spin states of a series of Co-Fe Prussian blue analogues containing Na(+) ion in the lattice, Na(x)()Co(y)()Fe(CN)(6) x zH(2)O, strongly depended on the atomic composition ratio of Co to Fe (Co/Fe) and temperature. Compounds of Co/Fe = 1.5 and 1.15 consisted mostly of the Fe(III)(t(2g)(5)e(g)(0), LS, S = 1/2)-CN-Co(II)(t(2g)(5)e(g)(2), HS, S = 3/2) site and the Fe(II)(t(2g)(6)e(g)(0), LS, S = 0)-CN-Co(III)(t(2g)(6)e(g)(0), LS, S = 0) site, respectively, over the entire temperature region from 5 to 350 K. Conversely, compounds of Co/Fe = 1.37, 1.32, and 1.26 showed a change in their electronic and spin states depending on the temperature. These compounds consisted mainly of the Fe(III)-CN-Co(II) site (HT phase) around room temperature but turned to the state consisting mainly of the Fe(II)-CN-Co(III) site (LT phase) at low temperatures. This charge-transfer-induced spin transition (CTIST) phenomenon occurred reversibly with a large thermal hysteresis of about 40 K. The CTIST temperature (T(1/2) = (T(1/2) descending + T(1/2) ascending)/2) increased from 200 to 280 K with decreasing Co/Fe from 1.37 to 1.26. Furthermore, by light illumination at 5 K, the LT phase of compounds of Co/Fe = 1.37, 1.32, and 1.26 was converted to the HT phase, and the relaxation temperature from this photoproduced HT phase also strongly depended on the Co/Fe ratio; 145 K for Co/Fe = 1.37, 125 K for Co/Fe = 1.32, and 110 K for Co/Fe = 1.26. All these phenomena are explained by a simple model using potential energy curves of the LT and HT phases. The energy difference of two phases is determined by the ligand field strength around Co(II) ions, which can be controlled by Co/Fe.     

Photochemistry of 3-aryl-2-isoxazoline1

3-Phenyl-2-isoxazoline (1) was irradiated to give 4-phenyl-2-oxazoline (3), β-aminoaldehyde (14) and benzonitrile from its π-π^* singlet excited state. Several related derivatives afforded similar photoproducts on irradiation. The quantum yields of the photoreactions were dependent on the magnitudes of the singlet energies of the 2-isoxazolines. p-Cyanophenyl-2-isoxazoline (1c) formed a one-to-one photoadduct (22) with benzene.     

Formation Thermodynamics of Binary and Ternary Lanthanide(III) Complexes with 1,10-Phenanthroline and Chloride in N,N-Dimethylformamide

Formation thermodynamics of binary and ternary lanthanide(III) (Ln = La, Ce, Nd, Eu, Gd, Dy, Tm, Lu) complexes with 1,10-phenanthroline (phen) and the chloride ion have been studied by titration calorimetry and spectrophotometry in N,N-dimethyl-formamide (DMF) containing 0.2 mol-dm^–3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25°C. In the binary system with 1,10-phenanthroline, the Ln(phen)³⁺ complex is formed for all the lanthanide(III) ions examined. The reaction enthalpy and entropy values for the formation of Ln(phen)³⁺ decrease in the order La > Ce > Nd, then increase in the order Nd < Eu < Gd < Dy, and again decrease in the order Dy > Tm > Lu. The variation is explained in terms of the coordination structure of Ln(phen)³⁺ that changes from eight to seven coordination with decreasing ionic radius of the metal ion. In the ternary Ln³⁺-Cl^–-phen system, the formation of LnCl(phen)²⁺, LnCl₂(phen)⁺, and LnCl₃(phen) was established for cerium(III), neodymium(III), and thulium(III), and their formation constants, enthalpies, and entropies were obtained. The enthalpy and entropy values are also discussed from the structural point of view.     

Study of SPG membrane emulsification processes for the preparation of monodisperse core-shell microcapsules

Experimental investigations on the Shirasu-porous-glass (SPG)-membrane emulsification processes for preparing monodisperse core-shell microcapsules with porous membranes were carried out systematically. The results showed that, to get monodisperse oil-in-water (O/W) emulsions by SPG membrane emulsification, it was more important to choose an anionic surfactant than to consider hydrophile-lipophile balance (HLB) matching. Increasing the viscosity of either the disperse phase or the continuous phase or decreasing the solubility of the disperse phase in the continuous phase could improve both the monodispersity and the stability of emulsions. With increasing monomer concentration inside the disperse phase, the monodispersity of emulsions became slightly worse and the mean diameter of emulsions gradually became smaller. Monodisperse monomer-containing emulsions were obtained when the SPG membrane pore size was larger than 1.0 micro m, and from these emulsions satisfactory monodisperse core-shell microcapsules with a porous membrane were prepared. On the other hand, when the SPG membrane pore size was smaller than 1.0 mciro m, no monodisperse emulsions were obtained because of the formation and chokage of solid monomer crystals in the pores or at the end of the pores of the SPG membrane. This was due to the remarkable solvation and diffusion of the solvent in water. With increasing the emulsification time the average emulsion diameter generally decreased, and the monodispersity of the emulsions gradually became worse.     

Stopped-flow spectrophotometric determination of nM level of Pb(II) using 5,10,15,20-terakis(1-methylpyridinium-4-yl)porphine

A spectrophotometric determination method for nM levels of Pb(II) has been developed using a stopped-flow spectrophotometer with cationic water-soluble porphyrin. The stopped-flow spectrophotometer allows the monitoring of the incorporation reaction of the Pb(II) ion into 5,10,15,20-terakis(1-methylpyridinium-4-yl)porphine (TMPYP) within a narrow time window (2.5 s) at pH 10.5–12.0 before the Pb-TMPYP complex is replaced with other foreign metal ions, since usually the Pb-TMPYP complex is very labile and readily replaced with other metal ions. This improved the selectivity of Pb(II) determination as compared to the conventional spectrophotometric determination of Pb(II) using water-soluble porphyrins.     

Generation of alkoxycarbenium ion pools from thioacetals and applications to glycosylation chemistry

[reaction: see text] Alkoxycarbenium ions have been generated and accumulated as "cation pools" by the low-temperature electrochemical oxidation of alpha-phenylthioethers. Although an unsuccessful attempt to accumulate glycosyl cations was made, a one-pot method for electrochemical glycosylation, which involves anodic oxidation of thioglycosides to generate glycosyl cation equivalents followed by their reactions with glycosyl acceptors, has been developed.     

Improvement of chemical analysis of antibiotics. IX. A simple method for residual tetracyclines analysis in honey using a tandem cartridge clean-up system

A simple, rapid and precise analytical method for the residual tetracyclines in honey has been established using a tandem cartridge clean-up system (prepacked reversed-phase and ion-exchange cartridges) followed by high-performance liquid chromatography. The recoveries of oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC) and doxycycline (DC) from honey spiked at a level of 1.0 ppm are 87.1, 85.3, 98.0 and 99.0%, respectively, with coefficients of variation of 1.1-3.9%. The detection limits in honey are 0.02 ppm for OTC and TC, and 0.05 ppm for CTC and DC, respectively. The time required for the analysis of four samples is only 1 h.     

Novel synthesis and properties of 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate: autorecycling oxidation of some alcohols under photo-irradiation

Three-step reactions starting from 2-chlorotropone with barbituric acid afforded novel 7,9-dimethylcyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (9·BF₄⁻), which is the isoelectronic compound of the 5-ethyl-3-methyllumiflavinium ion. The stability of cation 9 is expressed by the pK_R+ value, which was determined spectrophotometrically, as ca. 6.0. The electrochemical reduction of 9 exhibited low reduction potential at −0.58 (V vs Ag/AgNO₃), upon cyclic voltammetry (CV). In a search for the reactivity, reactions of 9·BF₄⁻ with some nucleophiles, hydroxide, hydride, amines, thiols, and methanol, were carried out to exhibit that the introduction of nucleophiles is dependent on the nucleophile itself. The photo-induced oxidation reactions of some alcohols catalyzed by 9·BF₄⁻ under aerobic conditions were carried out to give the corresponding carbonyl compounds in more than 100% yield [based on compound 9·BF₄⁻], suggesting the oxidizing function of 9·BF₄⁻ toward alcohols in the autorecycling process. The UV-vis and fluorescence spectra of 9 were studied to suggest the electron transfer from alcohols to the excited 9.     

Synthesis of the common left-half part of pectenotoxins

The common left-half [C31-C33(OC1-C7)-C40] part of pectenotoxins has been synthesized convergently from the C31-C35, C36-C40, and C1-C7 parts. The C31-C35 part, prepared via a new route shorter than our previous route, was coupled with the C36-C40 part through reductive lithiation and addition reactions to give an adduct stereoselectively, which was converted to a cyclic acetal corresponding to the C31-C40 part. The left-half was synthesized by a three-step process including esterification of the C31-C40 part with the C1-C7 part.     

Novel synthesis, static and dynamic properties, and structural characteristics of 5-cyano[n](2,4)pyridinophane-6-ones (n= 9-6) and their chemical transformations

A novel synthesis of 5-cyano[n](2,4)pyridinophane-6-ones 12a-d (n= 9, 8, 7, and 6) consists of allowing cyanoacetatoamide to react with cycloalk-2-enones. Their static and dynamic properties as well as structural characteristics are studied on the basis of their spectroscopic properties, cyclic voltammetry, and theoretical calculations. The (1)H and (13)C NMR spectra at various temperatures have clarified the dynamic behavior of the methylene chains for [7](2,4)- and [6](2,4)pyridinophane-6-one derivatives 12c and 12d. The energy barrier (Delta G(++)) of the bridge flipping of 12c is estimated to be 12.0 kcal mol(-1)(T(c)= 0 degree C). On the other hand, compound 12d undergoes pseudorotation (conformational change of the methylene chain) at room temperature, and does not undergo bridge flipping even at 150 degree C in DMSO-d(6). The energy barrier (Delta G(++)) of the pseudorotation of the methylene chain 12d of is found to be 10.5 kcal mol(-1)(T(c)=-25 degree C), and thus, two stable conformers of the hexamethylene bridge of 12d are determined as predicted by theoretical calculations. Deformation of the pyridone ring of 12d is also determined by X-ray crystallographic analysis. Furthermore, chemical transformations of 12a-c leading to 5-carbamoyl[n](2,4)pyridinophanes 15a-c are also accomplished successfully in moderate to good yields.