The First Observation of the Temperature-Dependent Phenomenon of Muon Catalyzed Fusion in Solid D–T Mixtures

A systematic study on muon catalyzed fusion (μCF) was conducted in solid deuterium and tritium (D–T) mixture. A variety of experimental conditions were investigated, i.e., tritium concentrations from 20 to 70%, temperatures from 5 to 16 K. A preliminary analysis result suggests a steep decrease in the dtμ-molecule formation rate with decreasing temperature, and also an increase in the probability for a muon reactivation after an α-sticking phenomenon. This revised version was published online in August 2006 with corrections to the Cover Date.     

A modeling concept of a mechanical system having a piecewise linear spring property for its diagnosis

Machine condition monitoring and fault diagnosis of rotating machinery are very important because of the wide use of rotating machinery in industry. Couplings and gears are used in many mechanical systems to connect elements and transmit power. The system is usually modeled as a single-degree-of-freedom system with a piecewise linear spring property, where the mass of main machine is only considered. In the present study, the dynamic behavior of a system with an unsymmetrical nonlinearity and a significant mass of the connecting part was investigated both experimentally and by numerical simulation. In the experiment, a 1/3 sub-harmonic oscillation was observed, but this oscillation was not found in the simulation using a single-degree-of-freedom system, in which the mass of the connecting part was ignored. However, when a two-degrees-of-freedom system was used that considered both the mass of the connecting part and the impact property, the 1/3 sub-harmonic oscillation was observed. Thus it is recognized that an adequate mathematical model for diagnosis in the early stage of abnormality must be selected on the basis of the mass ratio between the connecting part and the main body.     

Growth of GaN single crystals with extremely low dislocation density by two-step dislocation reduction

We have discovered a mechanism which can significantly reduce the dislocation density during the growth of GaN single crystals in the Na flux method. The significant reduction of the dislocation density occurs in the later stage of LPE growth, rather than solely at the seed-LPE interface for which we have already reported evidence indicating the presence of bundling dislocations. The two-step dislocation reduction is the key in achieving extremely low dislocation density using this method.     

Measurement of the solubility of metal complexes in supercritical carbon dioxide using a UV–vis spectrometer

A new apparatus based on the circulation method was developed to measure the solubility of metal complexes in supercritical carbon dioxide (scCO₂) at a wide range of temperatures and pressures. A UV–vis spectrometer, which was connected to a small saturation cell through optical fibers, was used to determine solubility. The solubilities of cobalt(III) acetylacetonate (Co(acac)₃) and chromium(III) acetylacetonate (Cr(acac)₃) in scCO₂ were measured to check the validity of both the apparatus and the method and to accumulate new solubility data. The solubility data for Cr(acac)₃ obtained in this study were in good agreement with the data reported in the literature.The measured solubilities of Co(acac)₃ and Cr(acac)₃ were also correlated with the empirical equation including the three adjustable parameters, based on the equation proposed by Chrastil. The parameters were determined by fitting the equation to the experimental data for each metal complex and the calculated results closely replicated the experimental data.     

Adsorption behavior of VII group elements on tertiary pyridine resin in hydrochloric acid solution

We investigated the adsorption behaviors of technetium and rhenium on tertiary pyridine resin in hydrochloric acid solution. Technetium has a little larger distribution coefficient in higher concentration of hydrochloric acid region than rhenium. However, the tendency of adsorption behavior of technetium and rhenium is similar. We concluded that the rhenium can be used as the substitute for technetium. Adsorption behaviors of platinum group elements were also investigated. The separation of technetium from platinum group elements is discussed.     

A note on chordal bound graphs and posets

We study relations between induced subgraphs and (n,m)-subposets. Using properties of (n,m)-subposets, we consider a characterization of chordal double bound graphs in terms of forbidden subposets. Furthermore, we deal with properties of a poset whose double bound graph is isomorphic to its upper bound graph or its comparability graph, etc.     

Total synthesis of fumitremorgin B

Total synthesis of fumitremorgin B, one of the potent tremorgic mycotoxins, was achieved in 7 steps.     

Binding of a surfactant counterion to low-charge-density poly(acrylic acid) and poly(methacrylic acid)

The binding of a cationic surfactant, dodecylpyridinium (C12Py) chloride, with a low-charge-density poly (methacrylic acid) (PMA) was investigated in buffer solutions under the condition of constant pH. The binding isotherms with PMA consisted of two and three steps at a pH lower and higher than 3.2, respectively. Bindings in the first step were independent of pH and this step was considered to correspond to the solubilization of the hydrocarbon chains of C12Py into the nonpolar region of the compact form of PMA. This is the indication of the compact form from the binding isotherm. At pH higher than 3.2, the second step was discriminated and it depended on the pH. In the third step, a sharp rise in the degree of binding (β) was observed accompanying the solubilization of the precipitates of the PMA–C12Py complex. The binding with poly(acrylic acid) (PAA) and PMA in conventional unbuffered NaCl solutions was also examined and the pH profile of the solution during the binding process was determined. In the case of unbuffered NaCl solutions, the binding with PAA took place cooperatively at the critical association concentration (cac). The binding isotherm consisted of two steps and the pH decreased with the increase in β. The binding isotherm of PMA, on the other hand, consisted of three steps: the pH decreased slightly in the first step and considerably in the second step with the increase in β but it increased with β in the third step, exhibiting a pH minimum around 3.2. The binding in the first step coincided with that obtained in the buffered solutions. Linear relationships between β and the pH were found for both polymers. In the case of PMA, no cac was observed in both buffered and unbuffered NaCl solutions. Received: 24 January 2001 Accepted: 23 May 2001     

Interlaboratory comparison of actinides in human tissue239Pu and240Pu

An international laboratory intercomparison of actinides in human tissues was organized by the United States Transuranium Registry and the National Institute of Standards and Technology. Five laboratories from the United States, United Kingdom, and Japan participated in the intercomparison. The laboratories were requested to analyze Standard Reference Materials 4351 (Human Lung) and 4352 (Human Liver) for²³⁹Pu and²⁴⁰Pu concentration. Approximately equivalent measurement capabilities were generally found among the participants. The results of this intercomparison were statistically comparable to those used for the original certification of the SRM's and were combined for a re-evaluation of the certified values. The combined data sets provide a better characterization of the inhomogeneity of these reference materials and result in a better basis for certification.Deceased.     

Modular synthesis of the ClickFerrophos ligand family and their use in rhodium- and ruthenium-catalyzed asymmetric hydrogenation

A series of diphosphine ClickFerrophos ligands (CF), based on a triazoleferrocene backbone, was synthesized in a four-step sequence via click chemistry methodology. In addition to the four previously synthesized ligands CF1, CF4, CF7 and CF10, six novel CF ligands CF2–3 and CF5–8 were prepared. Hydrogenation reactions of alkenes and ketones were significantly improved upon by using CF ligands as rhodium- or ruthenium-complexes in which the % ee values can be optimized by choosing the appropriate CF ligand depending on the substrate.