Ellipsometry characterization of a-Si:H layers for thin-film solar cells

In order to determine microscopic structures of hydrogenated amorphous silicon (a-Si:H) layers incorporated in a-Si:H-based thin-film solar cells, the spectroscopic ellipsometry (SE) analysis of a-Si:H layers prepared by plasma-enhanced chemical vapor deposition has been performed. In particular, we have characterized the a-Si:H layers by applying a new dielectric function model that allows the evaluation of the SiH₂ bond densities in a-Si:H networks. This model is based on our finding that the a-Si:H dielectric functions in the visible/ultraviolet region vary systematically with the formation of SiH₂-clustered microvoids. We have applied this model to estimate the SiH₂ content in a-Si:H layers fabricated on glass substrates, on which the characterization of the SiH₂ bonding is generally difficult. The validity of the SE analysis has been confirmed from the direct characterization of the SiH_n local structures using infrared ellipsometry.     

Development of a high-sensitivity chromatographic separation system for pyridylaminated aldopentoses and aldohexoses

A rare sugar is considered to be a monosaccharide rarely found in nature. To investigate their natural distribution and biological roles, a robust analytical system must be used to isolate, identify, and quantify them. Herein, we report the development of such a system that can specifically quantify and chromatographically separate four aldopentoses and eight aldohexoses tagged with 2-aminopyridine. Purified monosaccharides derivatized with a pyridylamino moiety (PA–monosaccharides) are first chromatographed over a high-performance anion-exchange resin. But, because two of the PA–aldohexoses used in this study, PA–talose and PA–idose, co-elute with the common saccharides, PA–glucose and PA–mannose, respectively, a second chromatographic step, reversed-phase high-performance liquid chromatography, is used to completely separate them. Thus, as shown by the results of this study, chromatographic separation of PA–monosaccharides is achievable and provides a quantitative measurement of common and rare isomeric aldopentoses and aldohexoses.     

Measurements of residual stress in semi-insulating GaAs by Cr-related luminescence lines

We have measured systematically the Cr-related zero-phonon lines in the 0.839 eV region in a series of plastically-bent semi-insulating GaAs:Cr with compressive or tensile stress along various bending axes. As a result, it has been found that the residual stress in semi-insulating GaAs:Cr wafers can be sensitively characterized from a splitting and energy shift of the 0.839 eV Cr-related luminescence lines in the low-temperature photoluminescence spectra. Furthermore, we have applied this method to the characterization of the interface stress of OMVPE-grown ZnSe/GaAs:Cr heterostructure and found that anomalous stress exists at the ZnSe/GaAs interface, which is inconsistent with stress predicted by the lattice mismatch of the heterojunctions.     

Anomalous gauge theories as constrained Hamiltonian systems

Anomalous gauge theories considered as constrained systems are investigated. The effects of chiral anomaly on the canonical structure are examined first for nonlinear σ-model and later for fermionic theory. The breakdown of the Gauss law constraints and the anomalous commutators among them are studied in a systematic way. An intrinsic mass term for gauge fields makes it possible to solve the Gauss law relations as second class constraints. Dirac brackets between the time components of gauge fields are shown to involve anomalous terms. Based upon the Ward-Takahashi identities for gauge symmetry, we investigate anomalous fermionic theory within the framework of path integral approach.     

Measurement of the solubility of metal complexes in supercritical carbon dioxide using a UV–vis spectrometer

A new apparatus based on the circulation method was developed to measure the solubility of metal complexes in supercritical carbon dioxide (scCO₂) at a wide range of temperatures and pressures. A UV–vis spectrometer, which was connected to a small saturation cell through optical fibers, was used to determine solubility. The solubilities of cobalt(III) acetylacetonate (Co(acac)₃) and chromium(III) acetylacetonate (Cr(acac)₃) in scCO₂ were measured to check the validity of both the apparatus and the method and to accumulate new solubility data. The solubility data for Cr(acac)₃ obtained in this study were in good agreement with the data reported in the literature.The measured solubilities of Co(acac)₃ and Cr(acac)₃ were also correlated with the empirical equation including the three adjustable parameters, based on the equation proposed by Chrastil. The parameters were determined by fitting the equation to the experimental data for each metal complex and the calculated results closely replicated the experimental data.     

Mobility performance of a rigid wheel in low gravity environments

To investigate influences of gravity on mobility of wheeled rovers for future lunar/planetary exploration missions, model experiments of a soil-wheel system were performed on an aircraft during variable gravity maneuvers. The experimental set-up consists of a single rigid wheel and a soil bed with two kinds of dry sands: lunar soil simulant and Toyoura sand. The experimental results revealed that a lower gravity environment yields higher wheel slippage in variable gravity conditions. In addition to the partial gravity experiments, the same experiments with variable wheel load levels were also performed on ground (1 g conditions). The on-ground experiments produced opposite results to those obtained in the partial gravity experiments, where a lower wheel load yields lower slippage in a constant gravity environment. In low gravity environments, fluidity (flowability) of soil increases due to the confining stress reduction in the soil, while the effect of the wheel load on sinkage decreases. As a result, both of these effects are canceled out, and gravity seemingly has no effect on the wheel sinkage. In the meantime, in addition to the effect of wheel load reduction, the increase of the soil flowability lessens the shear resistance to the wheel rotation, as a result of which the wheel is unable to hold sufficient traction in low gravity environments. This suggests that the mobility of the wheel is governed concurrently by two mechanisms: the bearing characteristics to the wheel load, and the shearing characteristics to the wheel rotation. It appears that, in low gravity, the wheel mobility deteriorates due to the relative decrease in the driving force while the wheel sinkage remains constant. Thus, it can be concluded that the lunar and/or Mars’ gravity environments will be unfavorable in terms of the mobility performance of wheels as compared to the earth’s gravity condition.     

Adsorption behavior of VII group elements on tertiary pyridine resin in hydrochloric acid solution

We investigated the adsorption behaviors of technetium and rhenium on tertiary pyridine resin in hydrochloric acid solution. Technetium has a little larger distribution coefficient in higher concentration of hydrochloric acid region than rhenium. However, the tendency of adsorption behavior of technetium and rhenium is similar. We concluded that the rhenium can be used as the substitute for technetium. Adsorption behaviors of platinum group elements were also investigated. The separation of technetium from platinum group elements is discussed.     

A note on chordal bound graphs and posets

We study relations between induced subgraphs and (n,m)-subposets. Using properties of (n,m)-subposets, we consider a characterization of chordal double bound graphs in terms of forbidden subposets. Furthermore, we deal with properties of a poset whose double bound graph is isomorphic to its upper bound graph or its comparability graph, etc.     

Total synthesis of fumitremorgin B

Total synthesis of fumitremorgin B, one of the potent tremorgic mycotoxins, was achieved in 7 steps.