飞行时间型质量分析器(TOFMS)的研制及应用

自行研制了电子碰撞离子化的飞行时间型质量分析器（ＴＯＦＭＳ），用于物质的化学分析。用研制的ＴＯＦＭＳ测量了Ａｒ离子化的飞行时间谱和离子的部分电离截面积比与碰撞电子能量的依赖关系，将它与Ｓｔｅｐｓｈａｎ等人的实验结果进行了比较。     

Synthesis and properties of a second‐order nonlinear optical side‐chain polyimide

A thermal stable aromatic polyimide (PI) with side‐chain second‐order nonlinear optical (NLO) chromophores has been developed. The PI was prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride with a new diamine having two N‐ethyl‐N‐[4‐[(6‐chlorobenzothiazol‐2‐yl)diazenyl]phenyl]‐2‐aminoethanol units as the NLO chromophore, followed by poling during or after the thermal imidization process. The resulting PI had number and weight‐average molecular weights (M_n, M_w) of 25,000 and 80,000, respectively, and a relatively high glass transition temperature of 180°C. The second harmonic coefficient (d₃₃) of PI at the wavelength of 1.064 μm was 138 pm/V (329.6 × 10⁻⁹ esu) and remained unchanged at elevated temperatures. The corona poling process of the NLO‐substituted poly(amic acid) to the PI was also studied in detail by measuring the second harmonic generation (SHG) from the polymer films. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1321–1329, 1999     

Modeling the Selectivity of Potassium Channels with Synthetic,Ligand‐Assembled π Slides

A supramolecular ion channel model mediates transmembrane ion transport (shown schematically) with a selectivity topology similar to that of K⁺ channels. This supports the biological significance of flexible arene arrays as selective cation binding sites.     

Flow-injection determination of copper(II) based on its catalysis on the redox reaction of cysteine with iron(III) in the presence of 1,10-phenanthroline

A redox reaction of cysteine with iron(III) proceeds slowly in the presence of 1,10-phenanthroline (phen). However, this reaction is accelerated in the presence of copper(II) as a catalyst, producing an iron(II)-phen complex (lambda(max)=510 nm). A sensitive spectrophotometric flow-injection method is proposed for the determination of copper(II) based on its catalytic action on this redox reaction. The dynamic range was 0.1-10 ng ml(-1) of copper(II) with a relative standard deviation of 1.0% (n=10) for 1.0 ng ml(-1) of copper(II) at a sampling rate of 30 h(-1). The detection limit (S/N=3) is 0.04 ng ml(-1). The proposed method was successfully applied to the determination of copper in river water as a certified reference material.     

Near‐Infrared Light‐Driven Hydrogen Evolution from Water Using a Polypyridyl Triruthenium Photosensitizer

In order to realize artificial photosynthetic devices for splitting water to H₂ and O₂ (2 H₂O+hν→2 H₂+O₂), it is desirable to use a wider wavelength range of light that extends to a lower energy region of the solar spectrum. Here we report a triruthenium photosensitizer [Ru₃(dmbpy)₆(μ‐HAT)]⁶⁺ (dmbpy=4,4′‐dimethyl‐2,2′‐bipyridine, HAT=1,4,5,8,9,12‐hexaazatriphenylene), which absorbs near‐infrared light up to 800 nm based on its metal‐to‐ligand charge transfer (¹MLCT) transition. Importantly, [Ru₃(dmbpy)₆(μ‐HAT)]⁶⁺ is found to be the first example of a photosensitizer which can drive H₂ evolution under the illumination of near‐infrared light above 700 nm. The electrochemical and photochemical studies reveal that the reductive quenching within the ion‐pair adducts of [Ru₃(dmbpy)₆(μ‐HAT)]⁶⁺ and ascorbate anions affords a singly reduced form of [Ru₃(dmbpy)₆(μ‐HAT)]⁶⁺, which is used as a reducing equivalent in the subsequent water reduction process.     

Electrostatics of cell membrane recognition: structure and activity of neutral and cationic rigid push-pull rods in isoelectric, anionic, and polarized lipid bilayer membranes.

Design, synthesis, and structural and functional studies of rigid-rod ionophores of different axial electrostatic asymmetry are reported. The employed design strategy emphasized presence of (a) a rigid scaffold to minimize the conformational complexity, (b) a unimolecular ion-conducting pathway to minimize the suprastructural complexity and monitor the function, (c) an extended fluorophore to monitor structure, (d) variable axial rod dipole, and (e) variable terminal charges to create axial asymmetry. Studies in isoelectric, anionic, and polarized bilayer membranes confirmed a general increase in activity of uncharged rigid push-pull rods in polarized bilayers. The similarly increased activity of cationic rigid push-pull rods with an electrostatic asymmetry comparable to that of alpha-helical bee toxin melittin (positive charge near negative axial dipole terminus) is shown by fluorescence-depth quenching experiments to originate from the stabilization of transmembrane rod orientation by the membrane potential. The reduced activity of rigid push-pull rods having an electrostatic asymmetry comparable to that in alpha-helical natural antibiotics (a positive charge near the positive axial dipole terminus) is shown by structural studies to originate from rod "ejection" by membrane potentials comparable to that found in mammalian plasma membranes. This structural evidence for cell membrane recognition by asymmetric rods is unprecedented and of possible practical importance with regard to antibiotic resistance.     

Syntheses of amphiphilic block copolymers by living cationic polymerization of vinyl ethers and their selective solvent‐induced physical gelation

Amphiphilic diblock copolymers were prepared by the living cationic polymerization of vinyl ethers in the presence of added bases, and their selective solvent‐induced physical gelation behavior was investigated. The block copolymerization of 2‐phenoxyethyl vinyl ether (PhOVE) and 2‐methoxyethyl vinyl ether (MOVE) was carried out in the presence of ethyl acetate with Et_1.5AlCl_1.5 in toluene at 0 °C. Despite the rate difference, diblock copolymers with a very narrow molecular weight distribution were obtained, quantitatively. By adding the selective solvent, water, to the acetone solution of the diblock copolymer, PhOVE₂₀₀‐b‐MOVE₄₀₀, physical gelation occurred suddenly and the system ceased to flow, maintaining transparency. Viscoelastic measurements and transmission electron microscopic observations were performed to examine the characteristic gelation behavior and structure of the obtained gels. Various gelation conditions and physical gelation by other amphiphilic block copolymers were also designed on the basis of the solubility of each block segment. Further, new forms of physical gelation, accompanied by the solubilization of immiscible organic compounds, were achieved using similar diblock copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3190–3197, 2001     

The incorporation of carboxylate groups into temperature‐responsive poly(N‐isopropylacrylamide)‐based hydrogels promotes rapid gel shrinking

Aqueous gel deswelling rates for copolymer hydrogels comprising N‐isopropylacrylamide (IPAAm) and 2‐carboxyisopropylacrylamide (CIPAAm) in response to increasing temperatures were investigated. Compared with pure IPAAm‐based gels, IPAAm–CIPAAm gels shrink very rapidly in response to small temperature increases across their lower critical solution temperature (their volume is reduced by five‐sixths within 60 s). Shrinking rates for these hydrogels increase with increasing CIPAAm content. In contrast, structurally analogous IPAAm–acrylic acid (AAc) copolymer gels lose their temperature sensitivity with the introduction of only a few mole percent of AAc. Additionally, deswelling rates of IPAAm–AAc gels decrease with increasing AAc content. These results indicate that IPAAm–CIPAAm copolymer gels behave distinctly from IPAAm–AAc systems even if both comonomers, CIPAAm and AAc, possess carboxylic acid groups. Thus, we propose that the sensitive deswelling behavior for IPAAm–CIPAAm gels results from strong hydrophobic chain aggregation maintained between network polymer chains due to the similar chemical structures of CIPAAm and IPAAm. This structural homology facilitates aggregation of chain isopropylamide groups for both IPAAm and CIPAAm sequences with increasing temperature. The incorporation of AAc, however, shows no structural homology to IPAAm, inhibiting chain aggregation and limiting collapse. A functionalized temperature‐sensitive poly(N‐isopropylacrylamide) hydrogel containing carboxylic acid groups is possible with CIPAAm, producing rapid and large volume changes in response to smaller temperature changes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 335–342, 2001     

Dispersion mechanisms of comb‐type superplasticizers containing grafted poly(ethylene oxide) chains

This paper discusses the influence of graft chain length and dosage of comb‐type superplasticizers on adsorption and dispersion mechanisms, and their subsequent effect on the fluidity of concentrated limestone suspensions. Contrary to the results obtained from interparticle potential calculations, the fluidity of concentrated suspension is improved by the use of comb‐type polymers having shorter grafted chain length. The dispersion mechanism of comb‐type polymers in a concentrated suspension is evaluated from the perspective of molecular structure, the amount of adsorbed polymer, and the amount of entrapped water in the clusters of CaCO₃ particles. Furthermore, the addition of certain soluble salts, which can effect the concentration of Ca²⁺ in liquid phase of CaCO₃ suspensions, has been observed to decrease the adsorption of comb‐type polymers on CaCO₃. Thus, the polymer adsorption process on solid surfaces can be selectively influenced by certain types of ions.     

A systematic preparation of new contracted Gaussian-type orbital sets. VIII. MINI-1 and MIDI-1 sets for Ga through Cd

Minimal contracted Gaussian basis sets are presented for Ga through Cd. Characteristically these Gaussian-based minimal sets give far better d orbital energies than those by minimal STO basis sets. These new basis sets were tested on Br₂ for which a new benchmark calculation was also performed. The test result is satisfactory in that these basis sets produce good general agreement with the near Hartree–Fock calculation with respect to the molecular spectroscopic constants.