Efficient method for large-scale preparation of two components H and I of Sg-6 saponins from whole seeds of wild soybean (Glycine soja Sieb. and Zucc.)

New saponin components, Sg-6 saponins, have been recently reported from the seeds of wild soybean (Glycine soja) which may have specific health benefits. To evaluate the possible health benefits, a large amount of Sg-6 saponins are needed, but general group A acetyl saponins and new Sg-6 saponins are eluted in overlapping peaks by ordinal preparative high-performance liquid chromatography and/or open column methods. A new method is proposed in this report. This method includes (1) deacetylation of group A acetyl saponins in alkali condition with KOH, (2) precipitation of Sg-6 saponins in acid condition with HCl, (3) recovery of Sg-6 saponins with aqueous methanol from the precipitate, and (4) elution of Sg-6 saponins by preparative reverse-phase open column. With this method, from 450?g of wild soybean whole seed powder, about 1?g of Sg-6 saponins (mixture of six components) was clearly separated from other saponins with 61% recovery.     

Crosslinkable polyurethane bearing a methacrylate structure in the side chain

A polyurethane bearing methacrylate groups through urethane linkages was prepared by the addition of 2‐methacryloyloxyethyl isocyanate to the hydroxyl groups in poly(hydroxyurethane) prepared by the polyaddition of a bifunctional cyclic carbonate with 1,12‐diaminododecane. The urethanization proceeded quantitatively in the presence of a catalytic amount of di‐n‐butyltin dilaurate at an ambient temperature, whereas a crosslinked product was obtained from the reaction at 60 °C. The resulting linear polyurethane, bearing a methacrylate structure, was thermally crosslinkable. Its radical copolymerization with vinyl‐type monomers afforded the corresponding crosslinked polymers, whose low glass transition temperatures suggested the flexibility of the polymer chains in the crosslinked product. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3400–3407, 2007     

Synthesis and photovoltaic properties of a low‐band‐gap polymer consisting of alternating thiophene and benzothiadiazole derivatives for bulk‐heterojunction and dye‐sensitized solar cells

We synthesized a novel low‐band‐gap, conjugated polymer, poly[4,7‐bis(3′,3′‐diheptyl‐3,4‐propylenedioxythienyl)‐2,1,3‐benzothiadiazole] [poly(heptyl₄‐PTBT)], consisting of alternating electron‐rich, diheptyl‐substituted propylene dioxythiophene and electron‐deficient 2,1,3‐benzothiadiazole units, and its photovoltaic properties were investigated. A thin film of poly(heptyl₄‐PTBT) exhibited an optical band gap of 1.55 eV. A bulk‐heterojunction solar cell with indium tin oxide/poly(3,4‐ethylenedioxythiophene)/poly(heptyl₄‐PTBT): methanofullerene [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) (1:4)/LiF/Al was fabricated with poly(heptyl₄‐PTBT) as an electron donor and PCBM as an electron acceptor and showed an open‐circuit voltage, short‐circuit current density, and power conversion efficiency of 0.37 V, 3.15 mA/cm², and 0.35% under air mass 1.5 (AM1.5G) illumination (100 mW/cm²), respectively. A solid‐state, dye‐sensitized solar cell with a SnO₂:F/TiO₂/N3 dye/poly(heptyl₄‐PTBT)/Pt device was fabricated with poly(heptyl₄‐PTBT) as a hole‐transport material. This device exhibited a high power conversion efficiency of 3.1%, which is the highest power conversion efficiency value with hole‐transport materials in dye‐sensitized solar cells to date. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1394–1402, 2007     

The relationship between polymer/substrate charge density and charge overcompensation by adsorbed polyelectrolyte layers

This work examines polyelectrolyte adsorption (exclusively driven by electrostatic attractions) for a model system (DMAEMA, polydimethylaminoethyl methacrylate, adsorbing onto silica) where the adsorbing polycation is more densely charged than the substrate. Variations in the relative charge densities of the polymer and substrate are accomplished by pH, and the polycation is of sufficiently low molecular weight that the adsorbed conformation is generally flat under all conditions examined. We demonstrate, quantitatively, that the charge overcompensation observed on the isotherm plateau can be attributed to the denser positive charge on the adsorbing polycation and that the ultimate coverage obtained corresponds to the adsorption of one oligomer onto each original negative silica charge, when the silica charge is most sparse, at pH 6. This limiting behavior breaks down at higher pHs where the greater silica charge density accommodates single chains adsorbing onto multiple negative sites. As a result of the greater substrate charge density and reduced polycation charge at higher pHs, the extent of charge overcompensation diminishes while the coverage increases on the plateau of the isotherm. Ultimately at the highest pHs, a regime is approached where the coil's excluded surface area, not surface charge, limits the ultimate coverage. In addition to quantifying the crossover from the charge-limiting to the area-limiting behaviors, this paper quantitatively reports adsorption-induced changes in bound counterion density and ionization at the interface, which were generally found to be independent of coverage for this model system.