Generation and stabilization of ultrafast optical pulse trains with monolithic mode-locked laser diodes

In this paper, we report on the generation and the stabilization of ultrafast optical pulse trains exceeding 100 GHz from monolithic mode-locked laser diodes (MLLDs) combined with some new techniques such as subharmonic synchronous mode-locking (SSML) and repetition-frequency multiplication (RFM) method. Key subjects to increase the pulse repetition frequencies of the MLLDs such as fast absorption recovery and harmonic mode-locking operation are discussed. 500 GHz optical pulse generation from a short-cavity, graded-index separated confinement heterostructure MLLD and THz-rate pulse generation by harmonic mode-locking are reported. We also demonstrate the stabilization of a 160 GHz MLLD by the SSML with subharmonic-frequency optical pulse injection and reveal that the SSML is very promising as a stabilization technique of the ultrafast MLLD beyond the limitations by the electronic device speed. A method to accurately measure the timing jitter of such ultrafast optical pulse train, all-optical down converting using a nonlinear optical device, is also presented. We also mention another choice for ultrafast optical pulse generation using the MLLD combined with a dispersive medium such as an optical fiber. We demonstrate here the generations of stable 84–256 GHz optical pulse trains by the RFM method of the MLLD stabilized by the SSML.     

LP MOVPE growth of AlGalnP/GalnP and its application to visible laser diodes

High-quality and uniform bulk layers of (Al _x Ga_1–x )_0.5In_0.5P (x=0–0.7) and AlGalnP/GainP quantum wells (QWs) are grown on 2°-off (100) GaAs substrates by low-pressure metal organic vapour phase epitaxy at a low growth rate of 0.3 nm s^-1. The amount of lattice mismatch and the variation of PL peak energy of (Al_0.5Ga_0.5)_0.5In_0.5P on the 50-mm substrate are less than 6×10^-4 and 2 meV, respectively. (Al_0.5Ga_0.5)_0.5In_0.5P/Ga_0.5In_0.5P SQWs show narrow PL spectra even from a 0.6 nm well measured at 20 K. The variation of PL peak energy from (Al_0.5Ga_0.5)_0.5In_0.5P/Ga_0.5In_0.5P MQWs is less than 10 meV. Also, as-cleaved AlGalnP/GalnP lasers fabricated by a three-step MOVPE show a pulsed threshold current of 82 mA at room temperature, output power of 12 mW, and the lasing wavelength at 668.2 nm.     

A Color Appearance Model Applicable in Mesopic Vision

We propose a color vision model that can be used to predict color appearance in mesopic vision as well as photopic and scotopic vision. It is based on a two-stage model which consists of the cone and opponent stages and it assumes rod intrusion at the opponent stage. The model has the following features to describe the color appearance in mesopic vision. First, it includes a gradual and nonlinear shift in spectral luminous efficiency from V (LD) to V (LD) to cope with the spectral sensitivity difference between photopic and scotopic vision and the nonlinearity of rod influence on the luminance channel. Second, the model assumes decrease of the chromatic component with decreasing illuminance to explain the reduction of saturation at low illuminance levels. Third, it assumes that red/green and yellow/blue components change with illuminance levels independently, thus explaining hue shifts with decreasing illuminance. We applied the model for color appearance simulation of natural scenes in a mesopic visual environment.     

Erratum to Formation and control of Au and Ag nanoparticles inside borate glasses using femtosecond laser and heat treatment

We report the spectroscopic properties of femtosecond laser-irradiated sodium-alumino-borate glass doped with silver and gold ions. We precipitated gold and silver nanoparticles by laser irradiation and annealing at 400°C for 30 min. The irradiation and annealing treatment produced different absorption and emission characteristics in Au³⁺ doped and Au³⁺, Ag⁺ codoped glasses, and the possible mechanisms of the observed results are discussed. The size of the nanoparticles was estimated by TEM and absorption band analysis.     

Depth-controlled reconstruction of 3D integral image using synthesized intermediate sub-images

In this paper, we propose a method that controls the depth of the three-dimensional (3D) object existing over the depth-of-focus in integral imaging. The depth control method is performed only in a computer by synthesizing the intermediate sub-images between original sub-images obtained by transforming the captured elemental images. In the reconstruction process, we can obtain reconstructed 3D images with the better image quality within depth-of-focus than that reconstructed over the depth-of-focus. To demonstrate the feasibility of our method, optical and computational experiments are carried out and its results are presented.     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Comparative study on the thermal behavior of structural concretes of sodium-cooled fast reactor

Journal of Thermal Analysis and Calorimetry - Thermal behaviors of two different siliceous concretes used in a sodium-cooled fast reactor were comparatively investigated in a temperature range from...     

Oxidative Epigallocatechin Gallate Coating on Polymeric Substrates for Bone Tissue Regeneration

Plant derived flavonoids have not been well explored in tissue engineering applications due to difficulties in efficient formulations with biomaterials for controlled presentation. Here, the authors report that surface coating of epigallocatechin gallate (EGCG) on polymeric substrates including poly (L‐lactic acid) (PLLA) nanofibers can be performed via oxidative polymerization of EGCG in the presence of cations, enabling regulation of biological functions of multiple cell types implicated in bone regeneration. EGCG coating on the PLLA nanofiber promotes osteogenic differentiation of adipose‐derived stem cells (ADSCs) and is potent to suppress adipogenesis of ADSCs while significantly reduces osteoclastic maturation of murine macrophages. Moreover, EGCG coating serves as a protective layer for ADSCs against oxidative stress caused by hydrogen peroxide. Finally, the in vivo implantation of EGCG‐coated nanofibers into a mouse calvarial defect model significantly promotes the bone regeneration (61.52 ± 28.10%) as compared to defect (17.48 ± 11.07%). Collectively, the results suggest that EGCG coating is a simple bioinspired surface modification of polymeric biomaterials and importantly can thus serve as a promising interface for tuning activities of multiple cell types associated with bone fracture healing.     

Potential Screening at Electrode/Ionic Liquid Interfaces from In Situ X-ray Photoelectron Spectroscopy

A new approach to investigate potential screening at the interface of ionic liquids (ILs) and charged electrodes in a two-electrode electrochemical cell by in situ X-ray photoelectron spectroscopy has been introduced. Using identical electrodes, we deduce the potential screening at the working and the counter electrodes as a function of applied voltage from the potential change of the bulk IL, as derived from corresponding core level binding energy shifts for different IL/electrode combinations. For imidazolium-based ILs and Pt electrodes, we find a significantly larger potential screening at the anode than at the cathode, which we attribute to strong attractive interactions between the imidazolium cation and Pt. In the absence of specific ion/electrode interactions, asymmetric potential screening only occurs for ILs with different cation and anion sizes as demonstrated for an imidazolium chloride IL and Au electrodes, which we assign to the different thicknesses of the electrical double layers. Our results imply that potential screening in ILs is mainly established by a single layer of counterions at the electrode.