Nitrogen‐Doped Ordered Mesoporous Carbon Supported Bimetallic PtCo Nanoparticles for Upgrading of Biophenolics

Hydrodeoxygenation (HDO) is an attractive route for the upgrading of bio‐oils produced from lignocellulose. Current catalysts require harsh conditions to effect HDO, decreasing the process efficiency in terms of energy and carbon balance. Herein we report a novel and facile method for synthesizing bimetallic PtCo nanoparticle catalysts (ca. 1.5 nm) highly dispersed in the framework of nitrogen‐doped ordered mesoporous carbon (NOMC) for this reaction. We demonstrate that NOMC with either 2D hexagonal (p6m) or 3D cubic (Im m) structure can be easily synthesized by simply adjusting the polymerization temperature. We also demonstrate that PtCo/NOMC (metal loading: Pt 9.90 wt %; Co 3.31 wt %) is a highly effective catalyst for HDO of phenolic compounds and “real‐world” biomass‐derived phenolic streams. In the presence of PtCo/NOMC, full deoxygenation of phenolic compounds and a biomass‐derived phenolic stream is achieved under conditions of low severity.     

Preparation and characterization of poly(m-xylylene oxamide) and its copolymer

New polyoxamides, poly(m-xylylene oxamide) (PMXD2) and its copolymer with 2-methyl-1,5- pentanediamine (P(MXD2/M52)) with relative viscosity up to 4.6 were synthesized via spray/solid state polymerization. The obtained polyoxamides were characterized by FTIR, NMR, WAXD, DSC and TGA. The T_m of the copolymers decreased with increasing percentage of poly(2-methyl-1,5- pentaneoxamide) (PM52) in the copolymer from 346°C for 100% poly(meta-xylyleneoxamide) (PMXD2) to 277°C for copolymers of PMXD/PM52 (60/40). TGA analysis revealed that the thermal stability of the copolymers compared well with commercial PA6 and XRD studies suggested the copolymers possessed high crystallinity. DMA profile of the PMXD/PM52 (70/30) copolymer showed better mechanical performance with a storage modulus of about 7.2 GPa as compared to 1.8 GPa of PA6 at 25°C.     

Facile synthesis of ZnO nanoparticles for the photocatalytic degradation of methylene blue

Journal of Sol-Gel Science and Technology - ZnO nanoparticle photocatalysts with a grain size range of 20–100?nm were prepared via a simple sol–gel method and characterized by...     

Absorption, first-pass metabolism, and disposition of itraconazole in rats

This study examined the pharmacokinetic disposition, oral absorption and hepatic extraction of itraconazole and its active metabolite, hydroxyitraconazole, in rats. After i.v. injection, serum itraconazole concentrations decreased biexponentially, with an average terminal elimination half-life, volume of distribution and systemic clearance of 4.9 h, 6.0 l/kg and 14.2 ml/min/kg, respectively. When given orally, its absorption was low, with a mean absolute bioavailability of 16.6%. The metabolite to parent drug area under the curve (AUC) ratio was higher after oral administration compared with i.v. injection (mean ratio, 2.7 vs. 0.9). The hepatic drug extraction ratio determined after femoral and portal vein administration averaged 18.5%. When hydroxyitraconazole was injected i.v., the elimination half-life, volume of distribution and systemic clearance of itraconazole averaged 10.0 h, 2.4 l/kg and 3.4 ml/min/kg, respectively. The fraction of the systemically available itraconazole that was metabolized to hydroxyitraconazole was 21.0% and 76.0% after i.v. and oral administration, respectively. In summary, this study is the first reporting the hepatic extraction of itraconazole and the i.v. disposition characteristics of hydroxyitraconazole in rats. Itraconazole is a drug with a low hepatic extraction ratio and its systemic clearance appears to be largely accounted for by hepatic metabolism.     

(1R,2R)‐1,2‐Di­phenyl‐1,2‐bis(8‐quinoline­sulfonyl­amino)ethyl­enedi­amine–acetone (1/1)

The crystal structure of the new chiral complex (1R,2R)‐1,2‐di­phenyl‐1,2‐bis(8‐quinoline­sulfonyl­amino)‐ ethyl­enedi­amine–acetone (1/1), C₃₂H₂₆N₄O₄S₂^.C₃H₆O, is reported. The conformation of the C₃₂H₂₆N₄O₄S₂ (BQSDA) mol­ecule is determined by a bifurcated N—H?N hydrogen‐bond system. The acetone of solvation is linked to the BQSDA mol­ecule by an N—H?O hydrogen bond.     

Two new coumarin biosides from Angelica dahurica

Two new coumarin biosides, tert-O-β-D-apiofuranosyl-(1→6)-O-β-D-glucopyranosyl-byakangelicin (1) and 2′-O-β-D-apiofuranosyl-(1→6)-β-D-glucopyranosyl-peucedanol (2), were isolated from the fresh roots of Angelica dahurica. The structures of the new compounds were elucidated on the basis of spectral analysis. Published in Khimiya Prirodnykh Soedinenii, No. 6, pp. 561–563, November–December, 2008.     

Heritability and linkage study on heart rates in a Mongolian population

Elevated heart rate has been proposed as an independent risk factor for cardiovascular diseases, but their interrelationships are not well understood. In this study, we performed a genome-wide linkage scan in 1,026 individuals (mean age 30.6 years, 54.5% women) from 73 extended families of Mongolia and determined quantitative trait loci that influence heart rate. The DNA samples were genotyped using deCODE 1,039 microsatellite markers for 3 cM density genome-wide linkage scan. Correlation analysis was carried out to evaluate the correlation of the covariates and the heart rate. T-tests of the heart rate were also performed on sex, smoking and alcohol intake. Consequently, this model was used in a nonparametric genome-wide linkage analysis using variance component model to create a multipoint logarithm of odds (LOD) score and a corresponding P value. In the adjusted model, the heritability of heart rate was estimated as 0.32 (P<.0001) and a maximum multipoint LOD score of 2.03 was observed in 77 cM region at chromosome 18. The second largest LOD score of 1.52 was seen on chromosome 5 at 216 cM. Genes located on the specified locations in chromosomes 5 and 18 may be involved in the regulation of heart rate.     

A novel phosphorus‐containing thermotropic liquid crystalline poly(ester‐imide) with high flame retardancy

A novel phosphorus–nitrogen thermotropic liquid crystalline poly(ester‐imide) (PN‐TLCP) derived from p‐acetoxybenzoic acid (ABA), terephthalic acid (TPA), acetylated 2‐(6‐oxide‐6H‐dibenz<c,e><1,2>oxa phosphorin‐ 6‐yl)‐1,4‐dihydroxy phenylene (DOPO‐AHQ) and N,N'‐hexane‐1,6‐diylbis(trimellitimide) was prepared by melt transesterification. The chemical structure, the mesophase behavior, and the thermal properties of the copolymer were investigated with Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis, wide‐angle X‐ray diffraction (WAXD), hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). PN‐TLCP exhibited a nematic mesophase with a strong birefringence at a low and broad mesomorphic temperature ranging from 220 to 350°C, an initial flow temperature as low as about 190°C and a glass transition temperature of about 160°C. PN‐TLCP has also good thermal stability, high char residues and excellent flame retardancy (limiting oxygen index, LOI = 71 and UL‐94 V‐0 rating). Copyright © 2009 John Wiley & Sons, Ltd.     

Syntheses,Crystal Structures and Luminescent Properties of Three Inorganic‐Organic Hybrid Frameworks Constructed from 4,5‐Imidazoledicarboxylate

Three inorganic‐organic hybrid frameworks [Mn(HIMDC)(4,4′‐bipyo)_0.5(H₂O)]_n (1) , [Cd(H₂IMDC)₂(2,2′‐bipyo)] (2) and [Ca(HIMDC)(H₂O)₂·H₂O]_n (3) (H₃IMDC = 4,5‐imidazoledicarboxylate; 4,4′‐bipyo = 4,4′‐bipyridine‐N,N′‐dioxide; 2,2′‐bipyo= 2,2′‐bipyridine‐N,N′‐dioxide) have been hydrothermally synthesized and characterized by the elemental analyses, IR spectra, TG analysis and the single crystal diffraction. Both compounds 1 and 3 exhibit 2D layers while 2 is a monomer. It is noteworthy that compound 2 exhibits strong fluorescent emission in the solid state at room temperature.     

Tuning Local Coordination Environments of Manganese Single-Atom Nanozymes with Multi-Enzyme Properties for Selective Colorimetric Biosensing

Single-atom nanozymes (SAzymes) are promising in next-generation nanozymes, nevertheless, how to rationally modulate the microenvironment of SAzymes with controllable multi-enzyme properties is still challenging. Herein, we systematically investigate the relationship between atomic configuration and multi-enzymatic performances. The constructed Mn_SA−N₃-coordinated SAzymes (Mn_SA−N₃−C) exhibits much more remarkable oxidase-, peroxidase-, and glutathione oxidase-like activities than that of Mn_SA−N₄−C. Based on experimental and theoretical results, these multi-enzyme-like behaviors are highly dependent on the coordination number of single atomic Mn sites by local charge polarization. As a consequence, a series of colorimetric biosensing platforms based on Mn_SA−N₃−C SAzymes is successfully built for specific recognition of biological molecules. These findings provide atomic-level insight into the microenvironment of nanozymes, promoting rational design of other demanding biocatalysts.