Surfactant-mixing effects on the interfacial tension and the microemulsion formation in water/supercritical CO2 system

The effects of surfactant mixing on interfacial tension and on microemulsion formation were examined for systems of air/water and water/supercritical CO2 (scCO2) interfaces and for water/scCO2 microemulsions. A fluorinated surfactant, sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO)2), was mixed with the three hydrocarbon surfactants, Pluronic L31, Tergitol TMN-6, and decyltrimethylammonium chloride (DeTAC), at equimolar ratio. For all the cases, the interfacial tension was significantly lowered by the mixing. The positive synergistic effect suggests that the mixed surfactants tend to pack more closely on the interface than the pure constituents. It was found, however, that the microemulsion formation in scCO2 was never facilitated by the mixing, except for the case of TMN-6. This is probably due to the segregation of the surfactants into hydrocarbon-rich and fluorocarbon-rich phases on the microemulsion surface.     

Which is reactive in alkaline solution, boronate ion or boronic acid? Kinetic evidence for reactive trigonal boronic acid in an alkaline solution

That boronic acid is a reactive species toward a diol moiety even in an alkaline solution and that the boronate ion is not very reactive were demonstrated by the estimated upper limit of the rate constants for the reactions of some boronic acids with 2,2'-biphenol and 2,3-dihydroxynaphthalene in a neutral-alkaline solution, which will correct a common misunderstanding in boron chemistry and would renew the idea of effective boronic acid sensor design for carbohydrates.     

Vesicle formation in oleyldimethylamine oxide/sodium oleate mixtures

Vesicle formation in a mixture of oleyldimethylamine oxide (OleylDMAO) and sodium oleate (NaOl) was investigated by viscoelastic measurements and cryoscopic transmission electron micrograph (cryo-TEM) observations. The viscoelastic properties changed with increasing mole fraction of NaOl (X _NaOl) from the Maxwell behavior of OleylDMAO solutions (X _NaOl=0) suggesting a transient network of long flexible chains. For X _NaOl=0.2 and 0.4 mixtures, both the shear storage modulus G and the shear loss modulus G showed weak dependences on angular frequency with a relation G>G. From cryo-TEM observations, vesicles coexisted with threadlike micelles in mixtures of X _NaOl=0.2 and 0.3. As X _NaOl increased further (X _NaOl=0.5 and 0.6), threadlike micelles disappeared and the coexistence of vesicles and globular micelles was observed. At X _NaOl=0.5, the viscosity decreased remarkably, which was consistent with the disappearance of threadlike micelles. The results indicated that vesicles were formed by the addition of NaOl to OleylDMAO solutions, contrary to the expectation of a decrease of the packing parameter with the introduction of electric charges.     

Native Mannose‐Dominant Extraction by Pyridine–Phenol Alternating Oligomers Having an Extremely Efficient Repeating Motif of Hydrogen‐Bonding Acceptors and Donors

Pyridine–phenol alternating oligomers in which pyridine and phenol moieties are alternatingly linked through acetylene bonds at the 2,6‐positions of the aromatic rings were designed and synthesized. The pyridine nitrogen atom and the neighboring phenolic hydroxyl group were oriented so that they do not form an intramolecular hydrogen bond but cooperatively act as hydrogen‐bonding acceptor and donor in a push–pull fashion for the hydroxyl group of saccharides. The longer oligomer strongly bound to lipophilic glycosides in 1,2‐dichloroethane, and association constants approached 10⁸ M ^?1. Moreover, the oligomer extracted native saccharides from a solid phase to apolar organic solvents up to the extent of an equal amount of the oligomer and showed mannose‐dominant extraction among naturally abundant hexoses. The oligomer bound to native saccharides even in 20 % DMSO‐containing 1,2‐dichloroethane and exhibited association constants of greater than 10 M ^?1 for D ‐mannose and D ‐glucose.     

Structure of the monoclinic-form misfit-layer compound, (Ca0.85OH)2alpha CoO2 (alpha approximately 0.57822)

The incommensurate modulated crystal structure of the new misfit-layer calcium cobalt oxide (Ca0.85OH)2alphaCoO2 was investigated using a superspace-group formalism with synchrotron X-ray diffraction data. The compound is a kind of composite crystal that consists of two interpenetrating subsystems, [CoO2]infinity layers containing triangular lattices formed by edge-sharing CoO6 octahedra, separated from each other by [2Ca0.85OH]infinity double-layered rock-salt-type slabs. Both the subsystems are monoclinic lattices with the unit cell parameters, a1 = 2.8180(4) A, b = 4.8938(6) A, c = 8.810(1) A, alpha0 = 95.75(3) degrees , and alpha(=|q|=a1/a2) = 0.57822(8), viz., a2 = 4.8736 A, with Z = 2. A possible superspace group is C2/m(alpha10)s0-C21/m(alpha(-1)10) for the respective subsystems. The atomic positions deviate from the average positions of the fundamental structure due to the incommensurable periodic interaction between the subsystems. A significant structural modulation was found in the [2Ca0.85OH] subsystem, whereas the modulation in the [CoO2] subsystem is less than in [2Ca0.85OH], due to the tight bonding of the close-packed CoO6 octahedra. The degree of modulation in the CoO2 layers, i.e., the potential modulation, is almost the same as those of other compounds of the misfit-layer cobalt oxides. Flattened CoO6 octahedra indicate hole doping into the CoO2 layers. The [2Ca0.85OH] blocks act as the charge reservoir layers, and the defect Ca ions are presumably the source of the holes.     

Conversion of phenyl-substituted cyclopentadienes to pyrylium cations

Phenyl-substituted cyclopentadienes are proved to form phenylated pyrylium cations in the presence of silver(I) perchlorate by insertion of an oxygen atom into the cyclopentadiene-ring. Three phenylated pyrylium compounds, [(Ph(5)C(5)O(+))(ClO(4)(-))](2)(CH(2)Cl(2)) (1), Ag(ClO(4))(H(2)O)(Ph(4)HC(5)O(+)) (ClO(4)(-)) (2), and (Ph(3)H(2)C(5)O(+))(ClO(4)(-)) (3) have been synthesized and characterized. A possible reaction pathway and formation mechanism of the pyrylium cation are proposed and discussed.     

Synthesis,Structure, and Reactivity of Lewis Base Stabilized Plumbacyclopentadienylidenes

Plumbacyclopentadienylidenes, in which the lead atoms have divalent states and are coordinated by THF, pyridine and N‐heterocyclic carbene, were synthesized and characterized. The THF‐ and pyridine‐stabilized compounds can be regarded as rare examples of hypervalent 10‐X‐4 species. The equilibrium between the THF adduct and the free plumbacyclopentadienylidene was evidenced by spectroscopic analysis and theoretical calculations. The THF adduct in benzene converted into a plumbylene dimer, where one of the lead centers is coordinated by THF and the other lead atom is coordinated by a divalent lead atom, the dimer gradually decomposing into spiroplumbole. The THF adduct unexpectedly reacted with trifluoroborane and trichlorogallane to afford fluoroborole and chlorogallole, which are the first examples of non‐annulated fluoroborole and gallole, respectively.     

A Dual‐Ligand Porous Coordination Polymer Chemiresistor with Modulated Conductivity and Porosity

Single‐ligand‐based electronically conductive porous coordination polymers/metal–organic frameworks (EC‐PCPs/MOFs) fail to meet the requirements of numerous electronic applications owing to their limited tunability in terms of both conductivity and topology. In this study, a new 2D π‐conjugated EC‐MOF containing copper units with mixed trigonal ligands was developed: Cu₃(HHTP)(THQ) (HHTP=2,3,6,7,10,11‐hexahydrotriphenylene, THQ=tetrahydroxy‐1,4‐quinone). The modulated conductivity (σ≈2.53×10^?5 S cm^?1 with an activation energy of 0.30 eV) and high porosity (ca. 441.2 m² g^?1) of the Cu₃(HHTP)(THQ) semiconductive nanowires provided an appropriate resistance baseline and highly accessible areas for the development of an excellent chemiresistive gas sensor.     

Experimental and theoretical study on generalized oscillator strengths of the valence-shell electronic excitations in CF4

We report an angle-resolved electron energy loss spectroscopy (EELS) study on the valence-shell electronic excitations in CF(4). Experimentally momentum-transfer-dependent generalized oscillator strengths (GOSs) or GOS profiles for low-lying electronic excitations at 12.6, 13.8, and 14.8 eV are derived from EELS spectra measured at an incident electron energy of 3 keV. We also calculate GOS profiles using theoretical wave functions at the equation-of-motion coupled cluster singles and doubles level. There are good agreements between experiment and theory except for a significant discrepancy at small momentum transfer for the 1t(l) → 3s Rydberg excitation at 12.6 eV. The experimental GOS profile for 1t(l) → 3s exhibits a shape that is typical of a dipole allowed transition, while the excitation is formally dipole forbidden. This symmetry breaking behavior is rationally accounted for by qualitatively analyzing the nature of vibronic coupling effects. For the excitation band at 13.8 eV, a shoulder and extrema are observed in the GOS profile and are then found to be mainly due to the 2(1)T(2) transition. Furthermore, the theoretical GOS profile for the 2(1)T(2) transition exhibits a remarkable oscillatory pattern; its origin is discussed by considering multicenter interference effects. For the 14.8 eV excitation band, the predominant nondipole nature of the underlying transitions are revealed and comparisons with the theoretical calculations show that major contributions to this band come from the 4t(2) → 3p excitation.     

7,10,14-Tri-t-butyl-3-amino-1,8-bisdehydro[14]annulene

Tri-t-butylcarboxybisdehydro[14]annulene was converted by the Curtius reaction into unstable aminoannulene, which could be characterized as N-acetyl derivative. The pK_a-value of the aminoannulene reflects aromatic nature of the annulene nucleus.