Fine structure of PVDF nanofiber fabricated by electrospray deposition

The fine structure of poly(vinylidene fluoride) (PVDF) nanofiber prepared by electrospray deposition (ESD) has been investigated by wide angle X‐ray diffraction (WAXD) and infrared spectroscopy (IR). The β‐phase crystal was dominant in the crystalline region. The degree of crystallinity of 0.54 for the nanofiber, determined by Ruland's method, was almost identical to that for a melt pressed sheet of PVDF. The disorder parameter k was 4, which is significantly smaller than the value of 6 for the melt pressed sheet of PVDF. Molecular orientation along the fiber axis was observed by the polarized infrared spectra of the uniaxially aligned nanofiber. These results suggest that the PVDF nanofiber possesses a fiber structure which is by no means inferior to that of practical fibers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 558–563, 2008     

Molecular dynamics study on hydrophobic effects in aqueous urea solutions.

Hydrophobic effects in aqueous urea were analyzed by molecular dynamics simulations. The contribution of solvents to the potential of mean force between two methane molecules was calculated by using molecular dynamics simulations and was compared with the solubility data of hydrocarbons in aqueous urea. Both the simulation results and the solubility data indicated that urea stabilizes methane-methane association. The stabilization was due to increasing the solvation free energies of small hydrocarbons such as methane by addition of urea. The solvation free energies of larger hydrocarbons, on the other hand, are decreased by addition of urea. This effect of the solute size on hydrophobic free energies in aqueous urea was also analyzed by using molecular dynamics simulations by means of division of the solvation process into two parts: the cavity formation and the introduction of the solute-solvent attractive interactions. In the cavity formation, urea increased hydrophobic free energies, and in the introduction of the solute-solvent attractive interactions, urea decreased hydrophobic free energies. The influence of urea on hydrophobic free energies was determined by the balance of effects of the two parts of the solvation process.     

Optical and scintillation properties of Pr-doped Li-glass for neutron detection in inertial confinement fusion process

Optical and scintillation properties of Pr-doped Li-glass, 20Al(PO₃)₃-80LiF:Pr 3%, have been studied for applications in neutron detection systems. Based on optical transmission and reflectivity, the absorption coefficient and refractive index were calculated from the Beer Lambert law. The absorption edge was apparently shifted to the longer wavelength from 160 nm to 240 nm due to 4f → 5d transitions of Pr ions. The strong absorption peaks of praseodymium 4f → 4f transitions were observed from 420 nm to 500 nm and around 590 nm. The radio-luminescence spectrum excited by ²⁴¹Am 5.5 MeV α source was measured. Strong emission peaks were observed around 250 nm. The α-ray excited pulse height spectrum and decay kinetics were also examined. Light yield was estimated to be 400 ± 40 photons/5.5 MeV α and the main component of the decay time was evaluated to be about 12 ns. Furthermore, the pulse height spectrum of the glass excited by ²⁵²Cf neutrons was also measured, and the light yield was estimated to be 140 ± 10 photons/neutron.     

1,4‐Bis(alkenyl)‐2,5‐dipiperidinobenzenes: Minimal Fluorophores Exhibiting Highly Efficient Emission in the Solid State

Minimum requirements : Crystals and thin films of 1,4‐bis(alkenyl)‐2,5‐dipiperidinobenzenes, which contain only one benzene ring as the aromatic component, emit visible light with excellent solid‐state quantum yields upon irradiation with UV light. Polystyrene thin films doped with the benzenes also exhibit brilliant fluorescence. By modifying the alkenyl groups, the emission color can be tuned in the range from blue to red.

     

Theoretical simulation of Kelvin probe force microscopy for Si surfaces by taking account of chemical forces

A new method of theoretical simulation for Kelvin probe force microscopy (KPFM) imaging on semiconductor or metal samples is proposed. The method is based on a partitioned real space (PR) density functional based tight binding (DFTB) calculation of the electronic states to determine the multi-pole electro-static force, which is augmented with the chemical force obtained by a perturbation treatment of the orbital hybridization. With the PR-DFTB method, the change of the total energy is calculated together with the induced charge distribution in the tip and the sample by their approach under an applied bias voltage, and the KPFM images, namely the patterns of local contact potential difference (LCPD) distribution, are obtained with the minimum condition of the interaction force. However, since the interaction force is due to electro-static multi-poles, the spatial resolution of the KPFM images obtained by PR-DFTB is limited to the nano-scale range and an atom-scale resolution cannot be attained. By introducing an additional chemical force, i.e., the force due to the orbital hybridization, we succeeded in reproducing atom-scale resolution of KPFM images. Case studies are performed for clean and impurity embedded Si surfaces with Si tip models.     

Quadpack computation of Feynman loop integrals

The paper addresses a numerical computation of Feynman loop integrals, which are computed by an extrapolation to the limit as a parameter in the integrand tends to zero. An important objective is to achieve an automatic computation which is effective for a wide range of instances. Singular or near singular integrand behavior is handled via an adaptive partitioning of the domain, implemented in an iterated/repeated multivariate integration method. Integrand singularities possibly introduced via infrared (IR) divergence at the boundaries of the integration domain are addressed using a version of the Dqags algorithm from the integration package Quadpack, which uses an adaptive strategy combined with extrapolation. The latter is justified for a large class of problems by the underlying asymptotic expansions of the integration error. For IR divergent problems, an extrapolation scheme is presented based on dimensional regularization.     

Selective guest inclusion in a non-porous H-bonded host

A hydrogen-bonded host solid demonstrates reversible and selective guest inclusion, despite not having a porous interlayer.     

Mechanistic study on adsorptive removal of tert-butanethiol on Ag-Y zeolite under ambient conditions

The dynamics and surface chemistry of tert-butanethiol (TBT) adsorptive removal over silver-exchanged Y zeolite (Ag-Y) were studied under ambient conditions. Saturation uptake on Ag-Y was higher than that on H-Y and Na-Y. The structural analyses by a combination of X-ray diffraction, Ag K-edge X-ray absorption near-edge structure (XANES)/extended X-ray absorption fine structures (EXAFS), Ag L(III)-edge XANES, S K-edge XANES, and in situ UV-vis show that the AgSH molecule, Ag(2)S monomer, and Ag(4)S(2) cluster are the dominant silver species in TBT-saturated Ag-Y. Dynamic changes in adsorbed intermediates, gas-phase products, and the silver sulfides were followed by in situ FTIR, mass spectroscopy and in situ UV-vis, respectively. The results show the following reaction mechanism: (1) formation of iso-butene and adsorbed H(2)S on the Ag(+) site via C-S cleavage of hydrogen-bonded TBT initially adsorbed on the Ag(+) site; (2) conversion of the adsorbed H(2)S to AgSH and H(+) on zeolite; (3) the reaction of two Ag-SH species to yield Ag(2)S and H(+) on zeolite.     

Construction of highly glycosylated mucin-type glycopeptides based on microwave-assisted solid-phase syntheses and enzymatic modifications

A MUC1-related glycopeptide having five core-2 hexasaccharide branches (C330H527N46O207, MW = 8450.9) was synthesized by a new strategy using a combination of microwave-assisted solid-phase synthesis (MA-SPGS) and enzymatic sugar elongation. Synthesis of a key glycopeptide intermediate was best achieved in a combination of PEGA [poly(ethylene glycol)-poly-(N,N-dimethylacrylamide) copolymer] resin and MA-SPGS using glycosylated amino acid building blocks with high speed and high purity. Deprotection of the glycopeptide intermediate and subsequent glycosyltransferase-catalyzed sugar elongations were performed for generation of the additional diversities with the sugar moieties of glycopeptides using beta1,4-galactosyltransferase (beta1,4-GalT) and two kinds of alpha2,3-sialyltransferases [ST3Gal III; alpha2,3-(N)-SiaT and ST3Gal II; alpha2,3-(O)-SiaT]. These reactions proceeded successfully in the presence of 0.2% Triton X-100 to convert the chemically synthesized trisaccharide glycans to disialylated hexasaccharide.     

Solid-phase synthesis of oligodeoxyribonucleoside boranophosphates by the boranophosphotriester method

Oligodeoxyribonucleoside boranophosphates (BH3-ODNs), containing four kinds of nucleobases, were synthesized by the solid-phase boranophosphotriester method. The 2'-deoxyribonucleoside 3'-boranophosphate monomers having 2-cyanoethyl (CE) groups as the phosphorus protecting groups were synthesized in good yields. A new condensing reagent, 1,3-dimethyl-2-(3-nitro-1,2,4-triazol-1-yl)-2-pyrrolidin-1-yl-1,3,2-diazaphospholidinium hexafluorophosphate, was found to be highly effective for the condensation reaction on the solid support. We also found that 1,8-bis(N,N-dimethylamino)naphthalene could accelerate the condensation reaction without causing beta-elimination of the CE groups from the boranophosphate triesters. The internucleotidic CE groups were selectively removed by treatment with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) under anhydrous conditions. The acetylation of the terminal 5'-hydroxy group was found to be effective to suppress the decomposition of the BH3-ODNs during the DBU treatment on the solid support. Under optimized conditions for the solid-phase synthesis and the deprotection reactions, BH3-ODNs (4mers and 12mers) containing four kinds of nucleobases were synthesized in good yields. The hybridization properties of the BH3-ODN 12mers with the complementary native DNAs and RNAs were determined by the thermal denaturing studies. In contrast to the low thermal melting (Tm) value of the duplex composed of T((PB)T)11 and native dA12 (12.8 degrees C), the duplex consisting of d(C(PB)A(PB)G(PB)T)3 and d(ACTG)3 showed a higher Tm value (44.7 degrees C) under high-salt conditions. Furthermore, d(C(PB)A(PB)G(PB)T)3 formed a more stable duplex with the complementary RNA, r(ACUG)3 with a Tm value of 50.5 degrees C. Thus, we first demonstrated that the binding affinity of BH3-ODN to a complementary DNA or RNA is dramatically increased, owing to the inclusion of the four kinds of nucleobases.