Preparation of barium hexaferrite nanopowders by the sol-gel method, using goethite

A series of barium hexaferrite nanoparticles (BaO·nFe₂O₃) with different n values were prepared by the sol-gel method, using goethite and Ba carbonate as raw materials. Phase identification of the samples was investigated by X-ray diffraction (XRD). XRD investigations show that the samples with n=5 and calcined at temperatures higher than 875 °C are single-phase Ba ferrite. An average crystallite size of 22 nm was obtained for the single-phase sample with minimum calcining temperature of 875 °C, using the Scherrer's formula. The morphology of the samples was checked by transmission electron microscope (TEM) and magnetic properties were measured by a sensitive permeameter. The results show that the samples have nonzero coercivities, which shows the particle size are not less than the critical size of Ba ferrite and then are not superparamagnet.     

Mild and Efficient Synthesis of 1-（6-Chloroquinoxalin-2-yl）-2- [4-（trifluoromethyl）-2,6-dinitrophenyl] Hydrazine Derivatives by Microwave Irradiation

Some 1-（6-chloroquinoxalin-2-yl）-2-[4-（trifluoromethyl）-2,6-dinitrophenyl] hydrazine derivatives have been synthesized via both conventional and microwave assisted organic synthesis（MAOS） methods. The MAOS method is more effective on synthesizing these compounds than the conventional method in regard to the higher chemical yields of products（76%-98%） and the shorter reaction time（1-15 min）.     

Measurement of the 2H(p,n) Breakup Reaction at 170 MeV and the Three-Nucleon Force Effects

The effects of three nucleon force (3NF) have been actively studied via the nucleon–deuteron (Nd) scattering states. The differential cross sections and the vector analyzing powers A _y of the ²H(p, n) inclusive breakup reaction at 170 MeV were measured for the study of 3NF effects in the intermediate energy region. The polarized proton beam of 170 MeV was injected to the deuterated polyethylene (CD₂) target and the energy of scattered neutrons were measured by using TOF method. The data were compared with the Faddeev calculations based on modern nucleon–nucleon (NN) forces with and without the 3NF. Concerning the differential cross sections, we can see large discrepancies between the data and the calculations in the region of scattered neutron energies are low, which is similar to the results of the ²H(p, p) inclusive breakup reaction at 250 MeV.     

Strain field and extrusion load in ECAE process of bi-metal circular cross section

In this paper the previous velocity field proposed by the authors for the prediction of strain field and deformation load of circular cross section billet in ECAE process has been extended to take into account the deformation behavior of bimetal circular billet in the same process. Accordingly, using Bezier method, as a robust method for determining the geometry of the streamlines, the strain field developed in the circular bimetal billet is calculated. Then, based on the kinematically admissible velocity and strain fields and using the upper bound theorem the ECAE load is predicted. It was found that at constant inner corner angle of ECAE die, with decreasing of outer curve corner the inhemogenity of strain distribution is decreased and the ECAE force is increased. Also, at a constant outer curve corner, by decreasing the inner corner angle, the extrusion load is increased. A good agreement was found between the predicted and experimental results.     

Blind deconvolution for robust signal estimation and approximate source localization

Synthetic time reversal (STR) is a technique for blind deconvolution in an unknown multipath environment that relies on generic features (rays or modes) of multipath sound propagation. This paper describes how ray-based STR signal estimates may be improved and how ray-based STR sound-channel impulse-response estimates may be exploited for approximate source localization in underwater environments. Findings are based on simulations and underwater experiments involving source-array ranges from 100 m to 1 km in 60 -m-deep water and chirp signals with a bandwidth of 1.5-4.0 kHz. Signal estimation performance is quantified by the correlation coefficient between the source-broadcast and the STR-estimated signals for a variable number N of array elements, 2 ≤ N ≤ 32, and a range of signal-to-noise ratio (SNR), -5 dB ≤ SNR ≤ 30 dB. At high SNR, STR-estimated signals are found to have cross-correlation coefficients of ～90% with as few as four array elements, and similar performance may be achieved at a SNR of nearly 0 dB with 32 array elements. When the broadband STR-estimated impulse response is used for source localization via a simple ray-based backpropagation scheme, the results are less ambiguous than those obtained from conventional broadband matched field processing.     

Structural, optical and electromagnetic properties of aluminum-clay nanocomposites

Aluminum pillared and exchanged bentonite particles were synthesized by the ion exchange method. The characteristics of the particles were investigated by Fourier-transform infrared spectra (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), scanning electron microscope (SEM), electron dispersive X-ray spectrometer (EDS), reflectance spectrophotometer (RS) and electromagnetic transition instrument (ETI). FTIR spectra showed a successful incorporation of Al complexes into the clay interlayer. The TGA result demonstrated an improvement in thermal stability of the Al-pillared clay compared with the untreated particles. SEM and EDX results showed the presence of aluminum aggregates on the surface of clay. It was also found that Al ions affect electromagnetic properties of the clay particles.     

Paraxial propagation in disclinated amorphous media

We study paraxial beam propagation along the wedge axis of a disclinated amorphous medium. The defect-induced inhomogeneity results in Berry phase and curvature that are affected by the induced uniaxial anisotropy. The Berry phase manifests itself as a precession of the polarization vector. The Berry curvature is responsible for the optical spin Hall effect in the disclinated medium, where beam deflection varies sinusoidally along the paraxial direction. Its application in determining the birefringence and the magnitude of the Frank vector is explained.     

Antimicrobial photodynamic therapy with two photosensitizers on two oral streptococci: an in vitro study

Laser Physics - Periodontal diseases are caused by infection of tissues supporting the teeth due to complex aggregate of bacteria known as biofilm and firstly colonized by streptococci. The aim of...     

Integral and state-to-state cross sections for the reaction D + H2(νf) → HD(νf) + H: A quantum mechanical study within the infinite order sudden approximation

In this paper are presented quantum mechanical t-initial and t-average cross sections and rate constants for the reactions D + H₂(ν₁ = 0, 1) → HD(ν_f = 0, 1) + H. The calculations were done employing the infinite order sudden approximation. It was found that the t-average total cross sections overlap very nicely with the available classical cross sections. As for rate constants a reasonably good fit was found with available experimental results.