Physical and conductivity properties of poly (vinyl chloride) ionomers

Poly (vinyl chloride)(PVC) is a cheapest plastic. Importance of PVC based ionomer has been gradually being popularizing due to compatibility of PVC with a number of salts to replace polyethylene oxide based ionomer. Under present investigation few of chloride group of PVC chain have been replaced by basic thiouronium group and these thiouronium groups are further oxidized to sulfonate group. Introduction of thiouronium group in PVC is confirmed through FTIR and further its oxidation to sulfonate group is also confirmed by FTIR. Conductivity in different stoichiometric ratio of PVCTU and PVCSO₃H was studied and found that PVCTU: PVCSO₃H in 1:1 ratio has conductivity near to pure PVC (10⁻⁹ Ohm-1 cm⁻¹) and increases with proportion of PVCSO₃Na in the mixture (10⁻⁶ Ohm⁻¹ cm⁻¹) for pure PVC, PVCTU has less conductivity not much significant.     

Copolymerization of propylene oxide and CO2 using achiral salophen Co(III) penta-florobenzoate as catalyst and tetrabutyl ammonium bromide as co-catalyst

Copolymerization of racemic propylene oxide with carbon dioxide is investigated in the presence of economically inexpensive and effective achiral salophenCo(III)X [salophen = N,N'-bis(3,5-di-tert-butylsalicylidene)-phenylenediimine, X = pentaflorobenzoate] catalyst and tetrabutyl ammonium bromide as co-catalyst. Effects of different variables like monomer to catalyst ratio, catalyst/co-catalyst ratio, temperature, pressure of CO₂ on molecular weight, yield and selectivity of poly(propylene carbonate) [PPC] have been investigated. The maximum M_w of 25.8 g/mol has been obtained at 15 bar and 50°C. All the samples were found to have excellent polydispersity near to 1.     

Interaction of Globular Plasma Proteins with Water‐Soluble CdSe Quantum Dots

The interactions between water‐soluble semiconductor quantum dots [hydrophilic 3‐mercaptopropionic acid (MPA)‐coated CdSe] and three globular plasma proteins, namely, bovine serum albumin (BSA), β‐lactoglobulin (β‐Lg) and human serum albumin (HSA), are investigated. Acidic residues of protein molecules form electrostatic interactions with these quantum dots (QDs). To determine the stoichiometry of proteins bound to QDs, we used dynamic light scattering (DLS) and zeta potential techniques. Fluorescence resonance energy transfer (FRET) experiments revealed energy transfer from tryptophan residues in the proteins to the QD particles. Quenching of the intrinsic fluorescence of protein molecules was noticed during this binding process (hierarchy HSA<β‐Lg <BSA, lower binding affinity for hydrophobic protein molecules). Upon binding with QD particles, the protein molecules underwent substantial conformational changes at the secondary‐structure level (50 % helicity lost), due to loss in hydration.     

Design and synthesis of oxaprozin-1,3,4-oxadiazole hybrids as potential anticancer and antibacterial agents

In the present study, we report design, synthesis and screening of new novel 5-substituted-2-mercapto-1,3,4-oxadiazole analogues appended to oxaprozin for their in vitro anticancer and antibacterial activity. The synthesised compounds were characterized using various spectroscopic techniques. Furthermore, the structure of 5b (2-(2-[4,5-diphenyloxazol-2-yl]ethyl)-5-(ethylthio)-1,3,4-oxadiazole) was unequivocally confirmed by X-ray analysis. Among the series 5c (2-(2-[4,5-diphenyloxazol-2-yl]ethyl)-5-(propylthio)-1,3,4-oxadiazole) showed most promising anticancer activity against A549 cancer cell line and all the reported analogues manifested satisfactory safety profiles against human normal cell line HEK293T. The products exhibited good antibacterial activity and among the tested 5j (2-(2-[4,5-diphenyloxazol-2-yl]ethyl)-5-([4-fluorobenzyl]thio)-1,3,4-oxadiazole) exhibited most potent.     

Polyaniline–Prussian blue hybrid: synthesis and magnetic behaviour

We report the synthesis of an organic–inorganic hybrid material composed of a conducting polyaniline (PANI) matrix and Prussian blue (PB) network, the latter formed in situ in the polymer matrix. The hybrid was prepared by treating FeCl₄ ^?-doped PANI with K₃Fe(CN)₆ unlike the previously reported method of potential cycling to obtain alternate layers of PANI and PB. Cyclic voltammetry and X-ray photoelectron spectroscopy investigations confirmed the formation of a network typical of PB inside the PANI matrix. Infrared spectroscopy points to the formation of an extended network between Fe in PANI matrix and Fe from K₃Fe(CN)₆. Magnetization studies of the hybrid material showed ferromagnetic ordering with a T _c of about 6?K.     

Synthesis, characterization and DNA-binding characteristics of Ru(II) molecular light switch complexes

A series of four polypyridyl Ru(II) complexes such as [Ru(L)₄(PIP)]²⁺ and [Ru(L)₄PPIP]²⁺ where L is 4-amino pyridine and Pyridine (PIP?=?2-phenylimidazo[4,5-f] [1, 10] phenanthroline), (PPIP?=?2-(4??-phenoxy-phenyl) imidazo[4,5-][1, 10]phenanthroline) have been synthesized and characterized by elemental analysis, physicochemical methods such as UV?Cvis, IR and NMR spectroscopic techniques. The DNA-binding behavior of these complexes was investigated by electronic absorption titrations, fluorescence spectroscopy, viscosity measurements and salt-dependent studies. The experimental results indicate that all these complexes can bind to DNA through an intercalation mode, the DNA-binding affinities of these complexes follow the order [Ru(4-APy)₄(PPIP)]²⁺(1)?>?[Ru(Py)₄PPIP]²⁺(2)?>?[Ru(4-APy)₄(PIP)]²⁺(3)?>?[Ru(Py)₄PIP]²⁺(4). Noticeably, these complexes have been found to be efficient photosensitisers for strand scissions in plasmid DNA. Further, all four complexes screened for their antimicrobial activity indicate that the complexes show appreciable activity against Escherichia coli and Neurospora Crassa. In addition, in the presence of Co²⁺, the emission of DNA-[Ru(L₄)PPIP/PIP]²⁺ can be quenched and recovered by the addition of EDTA, which exhibited the DNA ??light switch?? properties.     

The Growth Factors and Cytokines of Dental Pulp Mesenchymal Stem Cell Secretome May Potentially Aid in Oral Cancer Proliferation

Background: Growth factors and cytokines responsible for the regenerative potential of the dental pulp mesenchymal stem cell secretome (DPMSC-S) are implicated in oral carcinogenesis. The impact and effects of these secretory factors on cancer cells must be understood in order to ensure their safe application in cancer patients. Objective: We aimed to quantify the growth factors and cytokines in DPMSC-S and assess their effect on oral cancer cell proliferation. Materials and methods: DPMSCs were isolated from patients with healthy teeth (n = 5) that were indicated for extraction for orthodontic reasons. The cells were characterized using flow cytometry and conditioned medium (DPMSC-CM) was prepared. DPMSC-CM was subjected to a bead-based array to quantify the growth factors and cytokines that may affect oral carcinogenesis. The effect of DPMSC-CM (20%, 50%, 100%) on the proliferation of oral cancer cells ({"type":"entrez-nucleotide","attrs":{"text":"AW123516","term_id":"6099046"}}AW123516) was evaluated using a Ki-67-based assay at 48 h. AW13516 cultured in the standard growth medium acted as the control. Results: VEGF, HCF, Ang-2, TGF-α, EPO, SCF, FGF, and PDGF-BB were the growth factors with the highest levels in the DPMSC-CM. The highest measured pro-inflammatory cytokine was TNF-α, followed by CXCL8. The most prevalent anti-inflammatory cytokine in the DPMSC-CM was IL-10, followed by TGF-β1 and IL-4. Concentrations of 50% and 100% DPMSC-CM inhibited Ki-67 expression in AW13516, although the effect was non-significant. Moreover, 20% DPMSC-CM significantly increased Ki-67 expression compared to the control. Conclusions: The increased Ki-67 expression of oral cancer cells in response to 20% DPMSC-CM indicates the potential for cancer progression. Further research is needed to identify their effects on other carcinogenic properties, including apoptosis, stemness, migration, invasion, adhesion, and therapeutic resistance.     

Insertions of phenylacetylene with chelated bis(triphenylphosphine) - ruthenium(II)hydridocarbonyl complexes

Summary Phenylacetylene reacts stoichiometrically or in excess with the Ru—H bond of RuH(CO)(PPh₃)₂(L) (LH = 2-hydroxypyridine, 2-hydroxy-6-methylpyridine, acetylacetone, benzoylacetone, 2-hydroxyacetophenone, 2-hydroxypropiophenone, 2-hydroxybenzophenone and 4-methoxy-2-hydroxybenzophenone) in boiling benzene to give -vinylic or -vinylalkynyl complexes of the type Ru(CO)-(PPh₃)₂(L)(CH CHPh) and Ru(CO)(PPh₃)₂(L){C-(C CPh) CHPh} in good yield. The vinylic complex can also be obtained by reacting the sodio derivative of the chelating ligand with the 16e^– unsaturated complex, [Ru(CO)Cl(CH CHPh)(PPh₃)₂], in CH₂Cl₂/MeOH mixture at ambient temperature. These complexes have been characterized by elemental analyses, and i.r., ¹H, ¹³C and ³¹P n.m.r. spectroscopy.N.C.L Communication No. 5404.     

Polyaniline nanoparticles prepared in rodlike micelles

The effect of aniline hydrochloride (AHC) on the size and shape of sodium dodecyl sulfate (SDS) micelles has been investigated by dynamic light scattering. A monotonic decrease in the diffusion coefficient of the micelles was observed with an increase in AHC at fixed SDS concentration. This was ascribed to prolate ellipsoidal growth of the micelles due to decrease of the effective headgroup area/molecule by adsorption of AHC on SDS micelles. The length of the micelles can be tuned by controlling the ratio of concentrations of AHC to SDS. Polymerization of aniline in micelles of different sizes leads to the formation of colloidal polyaniline with variable sizes. A direct correlation between size ofmicelles and size ofpolyaniline particles was observed. Combination of static and dynamic light scattering experiments reveal that the conformations of the polymer do not change significantly with size of the colloid.