Insights into the structure–photoreactivity relationships in well-defined perovskite ferroelectric KNbO3 nanowires

Structure–function correlations are a central theme in heterogeneous (photo)catalysis. In this study, the geometric and electronic structure of perovskite ferroelectric KNbO₃ nanowires with respective orthorhombic and monoclinic polymorphs have been systematically addressed. By virtue of aberration-corrected scanning transmission electron microscopy, we directly visualize surface photocatalytic active sites, measure local atomic displacements at an accuracy of several picometers, and quantify ferroelectric polarization combined with first-principles calculations. The photoreactivity of the as-prepared KNbO₃ nanowires is assessed toward aqueous rhodamine B degradation under UV light. A synergy between the ferroelectric polarization and electronic structure in photoreactivity enhancement is uncovered, which accounts for the prominent reactivity order: orthorhombic > monoclinic. Additionally, by identifying new photocatalytic products, rhodamine B degradation pathways involving N-deethylation and conjugated structure cleavage are proposed. Our findings not only provide new insights into the structure–photoreactivity relationships in perovskite ferroelectric photocatalysts, but also have broad implications in perovskite-based water splitting and photovoltaics, among others.     

Surfactant-Free and Controlled Synthesis of Hexagonal CeVO4 Nanoplates: Photocatalytic Activity and Superhydrophobic Property

Nanomaterials with both superhydrophobic surface properties as well as photocatalytic activities could have important industrial applications. Herein, we synthesized CeVO₄ nanocrystals with hexagonal nanoplate structures from the reaction of decavanadate (K₆V₁₀O₂₈⋅9 H₂O) and CeCl₃⋅H₂O precursors via a hydrothermal method. This synthetic route has four advantages: 1) the reaction condition is relatively mild, 2) it doesn′t need surfactants or templates, 3) it requires no expensive equipment, and 4) products are of higher purity. During synthesis, solution pH, and reaction temperature were found to play important roles in determining the growth process and final morphologies of the CeVO₄ products. These products were characterized spectrophotometrically and via scanning and transmission electron microscopy. Furthermore, the wettability of the as-synthesized film CeVO₄ nanoplates was studied by measuring water contact angle (CA). The largest CA measured was at 169.5 ° for a glass substrate treated with 0.06 g mL⁻¹ CeVO₄ followed by 2 % 1 H, 1 H, 2 H, 2 H-perfluorodecyltriethoxysilane. Finally, the CeVO₄ nanoplates exhibited excellent photocatalytic activity in degradation of rhodamine B (RhB) under UV irradiation and was stable even after repeated cycles of use.     

Dyeing behavior and mechanism of Crocein Orange G on carboxymethyl cotton fabric

Cellulose - Traditional cotton fiber dyeing requires an abundance of salt, which leads to environmental pollution. Consequently, decreasing or eliminating the use of salt has become the primary...     

Cationic and temperature-sensitive liposomes loaded with eugenol for the application to silk

Silk has been widely used in the clothing industry due to their soft and smooth features, good biocompatibility, good heat dissipation, warmth and ultraviolet resistance. The application of fragrance to silk can significantly improve the performance of silk. However, there are two key scientific problems that need to be solved: slowing down the release rate of fragrances and increasing the scent lasting time of silk. In this study, cationic and temperature-sensitive liposomes were designed and prepared to encapsulate eugenol. These fragrance-loaded liposomes significantly slowed down the release rate of the fragrance and controlled the release rate of the fragrance in a thermo-sensitive manner. The liposomes adhered to the silk through electrostatic adsorption interaction. The positive charge on the fragrance-loaded liposomes neutralized much negative charge on silk and thereby increasing the adhesion efficiency.     

Encapsulation of Phosphomolybdate Within Metal–Organic Frameworks with Dual Enzyme-like Activities for Colorimetric Detection of H2O2 and Ascorbic acid

Developing artificial enzyme mimetics for the detection of small biomolecules are a current research interest because natural enzymes bear some serious disadvantages, such as their catalytic activity can be easily inhibited and they can be digested by proteases. Herein, a heteropoly acids (HPA) encapsulating metal–organic framework (MOF) with metal-carbene structure, [Cu₁₀(H₃trz)₄(Htrz)₄][PMo₁₂VO₄₁] (PMA-MOF) as bifunctional enzyme-mimetic catalyst for colorimetric detection of hydrogen peroxide (H₂O₂) and ascorbic acid (AA) was designed and synthesized. Thanks to the good stability and the synergistic effect of PMA and MOF, PMA-MOF exhibits the lower limit of detection (0.222 μM towards H₂O₂ and 0.0046 μM to AA), and the smaller Km value (0.0138 mM for H₂O₂ and 0.136 mM for o-phenylenediamine) compared to most reported MOF- and HPA-based enzyme-mimetic catalyst, to the best our knowledge.

     

Maximizing Ion Transmission in Differential Mobility Spectrometry

We provide modeling and experimental data describing the dominant ion-loss mechanisms for differential mobility spectrometry (DMS). Ion motion is considered from the inlet region of the mobility analyzer to the DMS exit, and losses resulting from diffusion to electrode surfaces, insufficient effective gap, ion fragmentation, and fringing field effects are considered for a commercial DMS system with 1-mm gap height. It is shown that losses due to diffusion and radial oscillations can be minimized with careful consideration of residence time, electrode spacing, gas flow rate, and waveform frequency. Fragmentation effects can be minimized by limitation of the separation field. When these parameters were optimized, fringing field effects at the DMS inlet contributed the most to signal reduction. We also describe a new DMS cell configuration that improves the gas dynamics at the mobility cell inlet. The new cell provides a gas jet that decreases the residence time for ions within the fringing field region, resulting in at least twofold increase in ion signal as determined by experimental data and simulations.

Open image in new window

Graphical Abstract ?

     

On the Nature of Mass Spectrometer Analyzer Contamination

Sample throughput in electrospray ionization mass spectrometry (ESI-MS) is limited by the need for frequent ion path cleaning to remove accumulated debris that can lead to charging and general performance degradation. Contamination of ion optics within the vacuum system is particularly problematic as routine cleaning requires additional time for cycling the vacuum pumps. Differential mobility spectrometry (DMS) can select targeted ion species for transmission, thereby reducing the total number of charged particles entering the vacuum system. In this work, we characterize the nature of instrument contamination, describe efforts to improve mass spectrometer robustness by applying DMS prefiltering to reduce contamination of the vacuum ion optics, and demonstrate the capability of DMS to extend the interval between mass spectrometer cleaning. In addition, we introduce a new approach to effectively detect large charged particles formed during the electrospray ionization (ESI) process.

Open image in new window

Graphical Abstract ?

     

POSS-modified PEG adhesives for wound closure

PEG-related adhesives are limited in clinical use because they are easy to swell and cannot support the cell growth.In this study,we produced a series of POSS-modified PEG adhesives with high adhesive strength.Introduction of inorganic hydrophobic POSS units decreased the swelling of the adhesives and enhanced cell adhesion and growth.The in vitro cytotoxicity and in vivo inflammatory response experiments clearly demonstrated that the adhesives were nontoxic and possessed excellent biocompatibility.Compared with the sutured wounds,the adhesive-treated wounds showed an accelerated healing process in wounded skin model of the Bama miniature pig,demonstrating that the POSS-modified PEG adhesive is a promising candidate for wound closure.     

Fiber-reinforced three-dimensional graphene aerogels for electrically conductive epoxy composites with enhanced mechanical properties

To enhance the mechanical properties of three-dimensional graphene aerogels with aramid fibers,graphene/organic fiber aerogels are prepared by chemical reduction of graphene oxide in the presence of organic fibers of poly(p-phenylene terephthalamide)(PPTA) and followed by freeze-drying. Thermal annealing of the composite aerogels at 1300 ° C is adopted not only to restore the conductivity of the reduced graphene oxide component but also to convert the insulating PPTA organic fibers to conductive carbon fibers by the carbonization. The resultant graphene/carbon fiber aerogels(GCFAs) exhibit high electrical conductivities and enhanced compressive properties, which are highly efficient in improving both mechanical and electrical performances of epoxy composites. Compared to those of neat epoxy, the compressive modulus, compressive strength and energy absorption of the electrically conductive GCFA/epoxy composite are significantly increased by 60%, 59% and 131%, respectively.     

A Practical System for High-Throughput Screening of Mutants of <Emphasis Type="Italic">Bacillus fastidiosus</Emphasis> Uricase

For high-throughput screening (HTS) of Bacillus fastidiosus uricase mutants, a practical system was proposed. By error-prone PCR with final 1.5 mM MnCl₂, two focused libraries of mutants for A1-V158 and V150-D212 were generated separately. After induced expression of individual clones in 48-well microplates, Escherichia coli cells (BL21) were lyzed by 1.0 M Tris-HCl at pH 9.0 in 96-well microplates at 25 °C for 7.5 ~ 10.5 h; uricase reaction was continuously monitored with 0.15 mM uric acid in 96-well plates by absorbance at 298 nm to estimate V _m/K _m by kinetic analysis of reaction curve for comparison. V _m/K _m was resistant to initial uric acid levels with an upper limit 3-fold over that of initial rates. By receiver-operator-characteristic analysis of the recognition of the one of higher activity in uricase pair whose specific activity ratio was 1.8 or 3.3, the area-under-the-curve was comparable to that with cell lysates prepared by sonication treatment. A cutoff for the maximum Youden index was thus developed to recognize positive mutants of 1-fold higher activity. Indeed, mutant L171I/Y182F/Y187F/A193S of higher activity but lower thermostability at pH 7.4 and mutant V144A of higher activity and consistent thermostability were discovered. Therefore, the proposed system was practical for HTS of uricase mutants.