ZnO nanowire array ultraviolet photodetectors with self-powered properties

A ZnO nanowire (NW) array ultraviolet photodetector (PD) with Pt Schottky contacts has been fabricated on a glass substrate. Under UV light illumination, this PD showed a high photo-to-dark current ratio of 892 at 30 V bias. Interestingly, it was also found that this PD had a high sensitivity of 475 without external bias. This phenomenon could be explained by the asymmetric Schottky barrier height (SBH) at the two ends causing different separation efficiency of photogenerated electron–hole pairs, which resulted in the formation of photocurrent. It is anticipated to have potential applications in self-powered UV detection field.     

Hybrid Deconvolution of Adaptive Optics Retinal Images from Wavefront Sensing

Adaptive optics can be used to compensate for the wave aberration of the human eyes to achieve high-resolution imaging in real time. However the correction ＆ partial due to the limitation of hardware. We propose a kind of hybrid image post-processing method, which uses the blind deconvolution combined with the residual data in wavefront sensor to restore the partially adaptive optics corrected retinal image. This method is applied in the image restoration of the vivid human retinal images. The results show that it is effective to improve the retinal image quality.     

磁共振弹性成像技术在肝纤维化检测中的研究

对肝脏组织的弹性应力分析在肝纤维化程度的精确定量评价方面是非常关键的,因此从弹性力学角度结合磁共振成像技术的磁共振弹性成像研究在肝脏疾病的早期诊断和治疗方面将具有重要意义和广泛应用. 该文针对弹性磁共振成像技术的理论与技术进行了全面的研究,开发了磁共振弹性图研究平台,主要包括：组织生物力学模型分析与建模,剪切波激励装置的开发,弹性成像序列的设计,弹性拟合算法研究与实现4个方面的工作. 基于上述工作,进行了相关体模和离体猪肝以及志愿者在体肝脏实验,实验结果表明,研究平台基本可以满足肝脏弹性成像研究的需要.     

Nanoscale gap filling for phase change material by pulsed deposition and inductively coupled plasma etching

The gap filling of phase change material has become a critical module in the fabrication process of phase change random access memory (PCRAM) as the device continues to scale down to 45 nm and below. However, conventional physical vapor deposition process cannot meet the nanoscale gap fill requirement anymore. In this study, we found that the pulsed deposition followed by inductively coupled plasma etching process showed distinctly better gap filling capability and scalability than single-step deposition process. The gap filling mechanism of the deposit–etch–deposit (DED) process was briefly discussed. The film redeposition during etching step was the key ingredient of gap filling improvement. We achieved void free gap filling of phase change material on the 30 nm via with aspect ratio of 1:1 by two-cycle DED process. The results provided a rather comprehensive insight into the mechanism of DED process and proposed a potential gap filling solution for 45 nm and below technology nodes for PCRAM.     

场发射冷阴极微栅孔阵列制备技术

实现了一种采用聚苯乙烯纳米球自组装技术和微机械制造技术加工的场发射阴极用亚微米栅极微孔阵列。设计了一套完整的工艺实验方案,首先采用微球自组装技术获得了亚微米级金属网孔掩膜,然后通过反应离子刻蚀技术获得了亚微米栅极孔阵列,从而实现了集成度高、分布均匀的周期性亚微米孔洞阵列的制备,微孔集成度达到108cm-2。实验研究了氧气刻蚀聚苯乙烯微球的规律。采用金属掩膜,四氟化碳干法刻蚀二氧化硅,获得了深度为500 nm的微孔。实验结果证明该工艺方案是一种获得大面积、均匀分布、集成度高的场发射冷阴极栅孔阵列的有效方法。     

雾玻璃上的彩色环

向一个冷玻璃上哈气,在玻璃表面会形成水雾.透过起雾的玻璃去观察白光光源,会看到有多层彩色环(内层蓝色,外层红色),并且在中央会出现白色亮斑.利用散射光干涉的模型解释了彩色圆环的成因.     

几率量子隐形传态的离子阱方案

本文提出了一个在分别囚禁于不同离子阱中的两个离子间实现几率量子隐形传态的简单方案,Alice对离子1和离子2的内态进行联合测量并通过经典通道告诉Bob测量结果,Bob利用一束经典驻波场激光与离子3相互作用并控制相互作用的时间就能够在离子3上最佳几率地重现离子1的初始内态.     

自发喇曼成像法在线测量流场组分浓度(II)

 介绍了利用自发Raman散射光谱测量低压气流组分绝对浓度的方法，在流动状态下得到了不同压力下的自发喇曼散射光谱，检测最低压力为133帕；对于含N₂氧气流在已知N₂浓度时实时标定检测了O₂的绝对浓度，测量误差小于8%。     

能量修正的Glauber模型对中能反应总截面的影响

叙述了对Glauber模型中的透射系数进行半经验的能量修正,并利用该修正模型计算了^12—14C,⁶Li,⁷Be,⁸B+¹²C和⁶Li,⁷Be,⁸B+⁹Be以及²⁰Ne+¹²C,¹²C+²⁷Al等系统的激发函数(能区范围10—1000MeV/u),经与实验值比较,能量修正的Glauber理论计算值能够很好地描述中能条件下的反应总截面实验测量值.     

基于同步辐射加速器的康普顿背散射γ射线源(Ⅰ)产生MeV量级γ光子的数值计算

提出在筹建的上海同步辐射装置上建造一条MeV量级γ射线束及应用站,采用μm波长的红外(或远红外)激光与储存环中3.5GeV电子束进行康普顿背散射,从而获得能区为1—25MeV的康普顿背散射γ光子束,该光子束具有高强度、高极化度(线和圆极化)、准单色、方向性好的优点,可以广泛地应用于核物理和核天体物理基础研究及相关的应用研究领域.介绍了康普顿背散射的基本原理,并结合储存环参数给出了光子束性能的数值计算结果.