The complex-mode vibration of ultrasonic vibration systems

The longitudinal-flexural and torsional-flexural vibrations are studied for the ultrasonic solid horn and the ultrasonic vibration system comprised of a sandwich transducer and a solid horn. The discussed solid horn is of arbitrary non-uniform cross-section. The analysis on flexural-mode vibration is based on Timoshenko theory. The theoretical results are verified by experiment.     

Tribological Behavior of Multiply-Alkylated Cyclopentanes (MACs)-Cu Nanoparticles Composite Thin Film

Multiply-alkylated cyclopentanes (MACs) composite thin films containing Cu nanoparticles are fabricated on the octadecyltrichlorosilane (OTS)-modified substrate by a spin-coating technique. The thickness, wetting behavior, and nanoscale morphologies of the films are characterized by means of ellipsometry, contact angle measurement, and atomic force microscope (AFM). The friction and wear behaviors of the thin films sliding against Si₃N₄ ball are examined on a UMT-2MT tribometer in a ball-on-disk contact mode. The worn surfaces of the OTS-MAC-Cu composite film and the counterpart Si₃N₄ balls are investigated with a scanning electron microscope. Water contact angle on OTS-MAC-Cu composite film is higher than that of OTS-MAC film. OTS-MAC-Cu composite film exhibits higher load-carrying capacity and better friction reduction and antiwear behavior as compared with OTS-MAC film. This may be attributed to the load-carrying and self-repairing property of the Cu nanoparticles in the composite film and the formation of a transfer layer composed of OTS, MAC, and Cu on the rubbing surface of the counterpart ball.     

硅基光子集成研究进展

报道了国际上关于硅基光子集成的最新研究进展和本课题组在该领域的研究成果,包括对一些光收发模块、III-V族/硅基激光器等集成器件的结构改进和工艺的探索,展示了兼容互补金属氧化物半导体工艺的硅基光子集成在信息技术领域中的巨大前景.可以预见,硅基光子集成已成为硅光子学的主要研究内容,硅光子学及硅基光子集成的发展目标是趋向更高速率、更低功耗及更大集成密度.     

Luminescence of a GaN grain with a nonpolar and semipolar plane in relation to microstructural characterization

We report on the growth of the high-quality GaN grain on a r-plane sapphire substrate by using a self-organized SiN interlayer as a selective growth mask.Transmission electron microscopy,scanning electron microscopy,and Raman spectroscopy are used to reveal the effect of SiN on the overgrown a-plane GaN growth.The SiN layer effectively terminates the propagation of the threading dislocation and basal plane stacking faults during a-plane GaN regrowth through the interlayer,resulting in the window region shrinking from a rectangle to a "black hole".Furthermore,strong yellow luminescence(YL) in the nonpolar plane and very weak YL in the semipolar plane on the GaN grain is revealed by cathodoluminescence,suggesting that C-involved defects are responsible for the YL.     

Propagation of phase-locked partially coherent flattened beam array in turbulent atmosphere

Analytical formulae for phase-locked partially coherent flattened beam array propagating in a turbulent atmosphere are derived based on the extended Huygens–Fresnel principle. Beam propagation factor (BPF) is introduced to evaluate the beam quality at the receiving plane. The influence of beam order, transverse coherence width length and the intensity of turbulence is discussed in detail.     

任意相位差条纹信号细分方法的研究

为消除传统细分方法中由于两路条纹信号不正交引入的细分误差，提出了一种可对任意相位差条纹信号直接细分的新方法。根据两路条纹信号的极性和幅值大小，把一个信号周期分成8个区段。高速采集两路条纹信号，通过判断信号采样点所处的区段是否跳变对信号幅值交点进行动态跟踪。对不足一个周期的条纹移动，当测量出起点与终点的幅值，计算出其所在的区段及位置后，结合两路信号的交点，可实现对任意相位差条纹信号的细分。实验结果表明，该方法突破了传统细分方法必须信号正交的限制，可对任意相位差信号进行准确地细分，降低了条纹测量中器件安装与调试的难度，具有更强的环境适应性和抗干扰能力。     

129I加速器质谱分析研究

通过对129I加速器质谱(AMS)分析中影响敏度和准确度各种参数的研究,如靶电极制备、压样、靶样中辅助介质（Matrix）的选择及使用比例等,优化了用于3 MV加速器质谱仪的SO-110型离子源的条件参数,确定129I-AMS测量的最佳靶电极材料为Cu,最佳的辅助介质为Nb粉末,Nb与AgI样品的最佳体积比为3∶1。在此条件下可以获得稳定且持续的I-束流进行测量129I/127I原子比值,实验测得西安加速器质谱仪的129I/127I本底值为1.5210-14。     

红外光谱与人工神经网络相结合识别栽培、野生黄芩和粘毛黄芩

为了识别栽培黄芩、野生黄芩和粘毛黄芩，采用非线性－线性、线性－线性、非线性－非线性三种模式的人工神经网络（ANN）分别分析各种黄芩的红外谱。我们采用42个样本作训练集，34个样本作检验集，用各种模式的ANN进行了监督性训练。当训练目标误差平方和定为0.01时，各类ANN对训练集中三类黄芩样本识别的正确率均为100%，但对检验集样本识别的结果各不相同，其识别的正确率与隐含层节点数S1有关。我们发现当S1较大时，识别正确率反而下降，可能此时网络的非线性程度过高，使其不适合于该类样本集的训练。线性－线性型ANN识别的结果随S1的变化不很大，但识别的正确率不高，基本在85％左右。非线性－线性型ANN识别的结果最佳。当S1为3时，其识别正确率超过了97％。因此该法可用以简便、快速、准确地识别这三种黄芩药材。     

一种改进的夜间数字能见度测量方法

为降低背景光噪声对数字摄像法夜间能见度测量的不确定性影响,对双光源法能见度测量系统进行改进。该系统利用避光筒限制CCD相机视场角,拍摄2个位于不同距离的LED背光源,然后对摄取到的图像进行处理得到光源图像的灰度值,再根据阿拉德定律求得大气消光系数,计算出大气能见度值。通过在无背景光、有背景光未加避光筒和加避光筒3种条件下的比对实验,分析光源图像的灰度信息,并将实验结果进行处理,得出有避光筒和无避光筒时测得的能见度值与无背景光下测量结果的相关系数分别是0.911 3和0.322 7,均方根相对偏差分别是6.87% 和23.38%。结果表明:系统抑制背景光噪声的能力明显增强,能较准确地测量夜间能见度。