Reaction of 3,4-disubstituted 1,2,5-oxadiazole 2-oxides with dipolarophiles : Substituent and solvent effect on the reaction courses

A variety of symmetrically or unsymmetrically 3,4-disubstituttd furoxans such as dicyano, dialkyl, diacyl, bis(phenylsulfonyl), N.N'-dialkyldicarbamoyl, 3(or 4)-methyl-4(or -3)-phenyl(or nitro, ethoxy, phenoxy, phenylthio, pyrrolidinyl, phenylsulfonyl), 3(or 4)-ethyl-4(or -3)phcnyl, and 3(or 4)-ethoxy-4(or -3)-phenylsulfonylruroxan reacted with dipolarophiles in toluene or xylene at the refluxing temperature to give nitrone-type 1,3-dipolar cycloadducts, 5-substituted 1-aza-2,8-dioxabicyclo-[3.3.0]octanes and/or 3-substituted 2-isoxazoline 2-oxides. On the other hand, some of the furoxans gave 2-isoxazolines via nitrile oxide 1,3-dipolar cycloaddition in a toluene (or xylene)-DMF solvent at the refluxing temperature.     

Palladium-catalyzed reaction of allyl carbamates; allylation of carbonucleophiles,and protection-deprotection of amines

Allylation of carbonucleophiles with allylic carbamates under neutral conditions has been studied. The C-allylation of carbonucleophile is competitive with the N-allylation of amines, and the structure of amines is crucial for the selectivity. Bulky secondary amines gave the best results. Also a new method of protection-deprotection of amines as carbamates has been developed. Smooth deprotection is possible by the palladium-catalyzed reaction of allyl carbamates with formic acid. This method is particulary useful for primary amines, including optically active amino acids.     

13C- and 1H-NMR and FTIR spectroscopic evidence for aggregate formation of organosilanes in toluene

 Changes in the ¹³C and ¹H NMR chemical shifts of the silane coupling agent (3-aminopropyltri-ethoxysilane, APTS) in toluene, which were detected as the concentration of APTS increased, have been interpreted in terms of the formation of micelles and the presence of a critical micelle concentration (CMC) equal to ca. 0.47 mol 1^-1. For the protons of the n-propyl segment, ¹H NMR splitting patterns have been analyzed and conformations of the propyl segment have been discussed. Plots of relative absorbance of the two NH₂ stretch IR bands at 3324 and 3384 cm^-1 against concentration provided an inflection point (corresponding to the CMC) at a value equal to 0.46 mol 1^-1. Thus, consideration of the interaction of APTS with a surface must take into account the presence of both APTS aggregates as well as APTS monomers. Received: 16 August 1996 Accepted: 26 September 1996     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

An efficient method for 3,4-dihydroisoquinolinium ion formation,leading to a facile introduction of nucleophiles

The ketene silyl acetal derived from ethyl 2-benzyltetrahydroisoquinoline-1-carboxylate undergoes a rapid oxidation reaction with N-bromosuccinimide to form 3,4-dihydroisoquinolinium ion, which reacts with Grignard reagents to give 1,1-disubstituted tetrahydroisoquinolines in good yields.     

Fine Tunable,Redox Active Octapalladium Chains Supported by Linear Tetraphosphines,Leading to Dynamically 1D Self-Assembled Coordination Polymers

A series of the octapalladium chains supported by meso-Ph₂PCH₂P(Ph)CH₂P(Ph)CH₂PPh₂ (meso-dpmppm) ligands, [Pd₈(meso-dpmppm)₄(L)₂](BF₄)₄ (L=none ( 1 ), solvents: CH₃CN ( 2 a ), dmf ( 2 b ), dmso ( 2 c ), RN≡C: R=Xyl ( 3 a ), Mes ( 3 b ), Dip ( 3 c ), ^tBu ( 3 d ), Cy ( 3 e ), CH₃(CH₂)₇ ( 3 f ), CH₃(CH₂)₁₁ ( 3 g ), CH₃(CH₂)₁₇ ( 3 h )) and [Pd₈(meso-dpmppm)₄(X)₂](BF₄)₂ (X=Cl ( 4 a ), N₃ ( 4 b ), CN ( 4 c ), SCN ( 4 d )), were synthesized by using 2 a as a stable good precursor, and characterized by spectroscopic (IR, ¹H and ³¹P NMR, UV-vis-NIR, ESI-MS) measurements and X-ray crystallographic analyses (for 1 , 2 a , b , 3 a , b , e , f , 4 a – d ). On the basis of DFT calculations on the X-ray determined structure of 2 b ( [2b-Pd₈]⁴⁺ ) and the optimized models [Pd₈(meso-Ph₂PCH₂P(H)CH₂P(H)CH₂PH₂)₄(CH₃CN)₂]⁴⁺ ( [Pd₈Ph₈]⁴⁺ ) and [Pd₈(meso-H₂PCH₂P(H)CH₂P(H)CH₂PH₂)₄(CH₃CN)₂]⁴⁺ ( [Pd₈H₈]⁴⁺ ), with and without empirically calculating dispersion force stabilization energy (B3LYP-D3, B3LYP), the formation energy between the two Pd₄ fragments is assumed to involve mainly noncovalent interactions (ca. −70 kcal/mol) with four sets of interligand C−H/π interactions and Pd⋅⋅⋅Pd metallophilic one, while electron shared covalent interactions are almost canceled out within the Pd₈ chain. All the compounds isolated are stable in solution and exhibit characteristic absorption at ∼900 nm, which is assignable to a spin allowed HOMO to LUMO transition, and shows temperature dependent intensity change with variable absorption coefficients presumably due to coupling with some thermal vibrations. The structures and electronic states of the Pd₈ chains are found finely tunable by varying the terminal capping ligands. In particular, theoretical calculations elucidated that the HOMO-LUMO energy gap is systematically related to the central Pd−Pd distance (2.7319(6)–2.7575(6) Å) by two ways with neutral ligands L ( 1 , 2 , 3 ) and with anionic ligands X ( 4 ), which are reflected on the NIR absorption energy of 867–954 nm. The isocyanide terminated Pd₈ complexes ( 3 ) further reacted with excess of RNC (6 eq) to afford the Pd₄ complexes, [Pd₄(meso-dpmppm)₂(RNC)₂](BF₄)₂ ( 13 ), and the cyclic voltammograms of 2 a (L=CH₃CN), 3 , and 13 (R=Xyl, Mes, ^tBu, Cy) demonstrated wide range redox behaviors from 2{Pd₄}⁴⁺ to 2{Pd₄}⁰ through 2{Pd₄}²⁺↔{Pd₈}⁴⁺, {Pd₈}³⁺, and {Pd₈}²⁺ strings. The oxidized complexes, [Pd₄(meso-dpmppm)₂(RNC)₃](BF₄)₄ ( 16 ), were characterized by X-ray analyses, and the two-electron reduced chain of [Pd₈(meso-dpmppm)₄](BF₄)₂ ( 7 ) was analyzed by spectroscopic and electrochemical techniques and DFT calculations. Reactions of 2 a with 1 equiv. of aromatic linear bisisocyanide (BI) in CH₂Cl₂ deposited insoluble coordination polymers, {[Pd₈(meso-dpmppm)₄(BI)](BF₄)₄}_n ( 5 ), and interestingly, they were soluble in acetonitrile, ³¹P{¹H} and ¹H DOSY NMR spectra as well as SAXS curves suggesting that the coordination polymers may exist in acetonitrile as dynamically 1D self-assembled coordination polymers comprising ca. 50 units of the Pd₈ rod averaged within the timescale.     

Identification of Shiga toxins in Shiga toxin-producing Escherichia coli using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry

We developed a rapid and reliable identification method for Shiga toxins in Shiga toxin-producing Escherichia coli (STEC) using immunoprecipitation and high-performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESI-MS). Polyclonal antisera specific for Shiga toxin 1 (Stx1) and Shiga toxin 2 (Stx2) were raised in rabbits so as to be used for the immunoprecipitation. The immunoprecipitaion was carried out by mixing sample solutions with 50 microl each of the antisera to Stx1 and Stx2 followed by allowing the mixed solutions to stand for 30 min. The quantity required to obtain the immunoprecipitate was more than 0.5 microg of Shiga toxins. HPLC-ESI-MS analysis of the resulting immunoprecipitates provided accurate molecular weight information on Shiga toxins, leading to direct evidence for the presence of these toxins. It requires at most two days to perform our procedure from toxin extraction to measurement of HPLC-ESI-MS whereas the previous method using isolation procedures required about two weeks to complete. The usefulness of the present method has been demonstrated by identifying Stx1, Stx2 and a variant of Stx2 (Stx2e) in the immunoprecipitates prepared from STEC strains.     

A chiral 28-membered macrocycle with symmetry and structure similar to that of trans-cyclooctene

[reaction: see text] A bridged N,N-di(aryl)-1,2,4,5-benzenediimide was synthesized in which restricted rotation led to two diasteriomeric conformations at room temperature. The more stable syn-macrocycle is achiral, whereas the strained anti-macrocycle possesses planar chirality similar to that of trans-cyclooctene. The structure was characterized by X-ray crystallography, and the enantiomers were resolved by chiral chromatography.