Photosensing Device Composed of Bilayer Membranes of Polymer-Pendant Ru(bpy)3 2+ and Prussian Blue

A photosensing device was fabricated based on a photochemical electron transfer reaction. A graphite electrode was coated with bilayer membranes of polymer-pendant Ru(bpy)₃ ²⁺ and Prussian Blue (PB) to give a bilayer-coated device. It was irradiated with visible light in an aqueous electrolyte and the induced photocurrent was measured as a function of the applied potential. The excitation of PB was responsible for the anodic photocurrent, while the excitation of the Ru complex mainly induced the cathodic photocurrent by an electron-transfer mechanism.     

Application of Polymer-Embedded Tris(2,2′ Bipyridine-Ruthenium(II) to Photodetection of Oxygen

A Nafion film containing tris(2,2′-bipyridine)ruthenium(II) as a luminescence probe was applied to photodetection of oxygen in a gas by utilizing the luminescence quenching by dioxygen. The linear Stern-Volmer plots of the emission intensity with respect to the oxygen concentration allowed quantitative determination of the oxygen. From the emission decay studied by a single-photon counting method, it was concluded that the quenching of the excited state Ru complex by oxygen proceeds by a conventional dynamic mechanism.     

RAFT synthesis of an amphiphilic block copolymer bearing chlorin rings in the hydrophobic segment and its application in photodynamic therapy

RAFT polymerization of styrene (St) in the presence of 5,10,15,20‐tetrakis(pentafluorophenyl)porphyrin (TFPP) was conducted using 4‐cyano‐4‐(thiobenzoyl)thiopentanoic acid as a chain‐transfer agent and azobisisobutyronitrile as an initiator at 60 °C. The resulting polymer exhibited a chlorin‐like UV‐vis spectrum, which indicated that the polymer possessed a reduced TFPP structure. Furthermore, an SEC trace recorded using UV‐vis detector (λ = 410 nm), which selectively detected the TFPP‐incorporated polymer, shifted toward higher molecular mass as the polymerization progressed. This evidence indicated that TFPP acted as a vinylene‐type monomer, such as maleimide, to form a copolymer, namely, poly(St‐co‐TFPP). The mole fraction of TFPP units was estimated to be 0.74 × 10^?3, which was close to that in the feed (1 × 10^?3). Chain extension of poly(St‐co‐TFPP) with polyethylene glycol monomethyl ether acrylate (PEGA) was performed to afford the amphiphilic block copolymer poly(St‐co‐TFPP)‐b‐poly(PEGA). The degrees of polymerization of St and PEGA were determined to be 64 and 75, respectively. Poly(St‐co‐TFPP)‐b‐poly(PEGA) formed micelles following dialysis. The median diameter of the micelles in solution was determined to be 16 nm by DLS. The photocytotoxicity of the micelle solution was evaluated in a human glioblastoma cell line (U251) and an N‐methyl‐N'‐nitro‐N‐nitrosoguanidine‐induced mutant of a rat murine RGM‐1 gastric carcinoma mucosal cell line (RGK‐1). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3395–3403     

Radical polymerization of trifluoromethyl‐substituted methyl methacrylates and their application for use in pressure‐sensitive paint

Three CF₃‐substituted methyl methacrylates (MMAs), 2,2,2‐trifluoroethyl methacrylate (TFEMA), 1,1,1,3,3,3‐hexafluoroisopropyl methacrylate (HFIPMA) and nonafluoro‐tert‐butyl methacrylate (NFTBMA), were polymerized by conventional radical polymerization to give oxygen‐permeable polymers for application in pressure‐sensitive paint (PSP). The radical copolymerizations of styrene with TFEMA, HFIPMA, or NFTBMA were carried out to examine the effect of CF₃ groups on the polymerizability. The e values increased in the order of MMA (0.40) < TFEMA (0.76) < HFIPMA (1.19) < NFTBMA (1.31). The homopolymers of TFEMA, HFIPMA and NFTBMA (PTFEMA, PHFIPMA, and PNFTBM, respectively) were examined as polymers for use in PSP using 5,10,15,20‐tetrakis(pentafluorophenyl)porphinato platinum(II) (PtTFPP). The PSP consisting of PNFTBMA and PtTFPP exerted very high pressure sensitivity and very low temperature sensitivity. In the absence of oxygen, the temperature sensitivity decreased in the order of PTFEMA > PHFIPMA > PNFTBMA = PMMA, which corresponds to the order of glass transition temperatures (T_g). However, the activation energies of the overall process of the luminescence quenching by oxygen were found to be 16.8 (PMMA), 13.0 (PTFEMA), 6.8 (PHFIPMA), and 4.3 kJ mol^?1 (PNFTBMA). Therefore, the low temperature sensitivity of PNFTBMA was attributed to its high degree of substitution with CF₃ groups and to its relatively high T_g value. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 963–972     

CHARACTERISTIC PROPERTIES OF LECITHIN AS A SURFACTANT

Characteristic solution properties of lecithin were studied in 1) water+propanol/lecithin/hexadecane and 2) ethanol/lecithin/ hexadecane systems. 1) Solvent property of water changes by added alcohol and the hydrophile-lipophile property of lecithin is balanced in 13 wt% propanol aq.-hexadecane system. Three liquid phases, i.e. aqueous alcohol, lecithin and hexadecane are found. The volume fraction of the lecithin phase increases with its concentration and at 2.3 wt%/system, all solvent molecules are swelled and one microemulsion phase is obtained. 2) In ethanol/ lecithin/hexadecane system, lecithin is also insoluble in the solvent, and swells a large amount of hexadecane.     

Transportation of a microdroplet on an oriented liquid crystal surface

Wetting phenomena play important roles in several technological applications and in many physical and biological thin‐film phenomena, such as wetting, adhesion and friction. One of key issues of these studies is to control the surface energy (or wettability) dynamically for liquid transportation. We have developed a liquid crystal (LC) surface for use as a transport substrate since we expected that the surface energy of an LC surface can be controlled rapidly using an electric field. The rapid control of the polarisability (or wettability) of a liquid crystalline surface by an electric field has been demonstrated, together with the transportation of a liquid microdroplet.     

Synthesis,Structure, and Reactivity of Lewis Base Stabilized Plumbacyclopentadienylidenes

Plumbacyclopentadienylidenes, in which the lead atoms have divalent states and are coordinated by THF, pyridine and N‐heterocyclic carbene, were synthesized and characterized. The THF‐ and pyridine‐stabilized compounds can be regarded as rare examples of hypervalent 10‐X‐4 species. The equilibrium between the THF adduct and the free plumbacyclopentadienylidene was evidenced by spectroscopic analysis and theoretical calculations. The THF adduct in benzene converted into a plumbylene dimer, where one of the lead centers is coordinated by THF and the other lead atom is coordinated by a divalent lead atom, the dimer gradually decomposing into spiroplumbole. The THF adduct unexpectedly reacted with trifluoroborane and trichlorogallane to afford fluoroborole and chlorogallole, which are the first examples of non‐annulated fluoroborole and gallole, respectively.     

Multiple plasmonic effect on photocurrent generation of metal‐loaded titanium dioxide composite/dye films on gold grating surface

We demonstrate the multiple plasmonic effect on the photocurrent properties of photoanodes containing Ag or Au nanoparticles (NPs) loaded onto titanium dioxide film (Ag–TiO₂ or Au–TiO₂) on Au grating surfaces. Ag–TiO₂ or Au–TiO₂ nanocomposite particles are prepared by a flame spray pyrolysis route. The structures and morphologies of the prepared products are characterized by high‐resolution transmission electron microscopy. The Ag–TiO₂ or Au–TiO₂ composite NPs are deposited by spin coating onto the Au grating surfaces. The photoanode electrode is a layered structure of blu‐ray disc‐recordable grating substrate/Au/Ag (or Au)–TiO₂/dye/electrolyte/indium‐tin oxide. The plasmonic effect is induced when Ag or Au NPs are located within the propagating surface plasmon (SP) field on the Au grating surface. The short‐circuit photocurrent is increased by exciting the grating‐coupled propagating SP on the Au gratings and is further enhanced by positioning the Ag or Au NPs within the grating‐coupled SP field. Copyright © 2014 John Wiley & Sons, Ltd.     

Application of the single comparator method to instrumental photon activation analysis

Journal of Radioanalytical and Nuclear Chemistry - Instrumental photon activation analysis (IPAA) is nondestructive and multi-elemental analysis method like instrumental neutron activation...