Ag8Cl2[Se2P(OEt)2]6: A rare example containing a combination of discrete clusters and chains

The novel halide-centered Ag(I)8 cubic clusters containing diethyl diselenophosphato ligands are prepared and their solid state structures, a discrete unit or a one-dimensional chain, are dictated by the counter anions.     

Determination of Trace Iron(II) in the Presence of Iron(III)

The determination of trace iron(II) is usually interfered by the presence of iron(III) when ortho-phenanthroline colorimetric method is used. In this report a chromogenic reagent which contains ortho-phenanthroline-EDTA mixture has been developed to decrease the interference of ferric ion after adjusting the acidity of sample at 0.1 N by adding the sulfuric acid. The procedure is also simplified by introducing sulfamate buffer solution (pH= 1.5) without adjusting the acidity of sample with sulfuric acid. If iron(III) is not present in the sample, this method is also applicable. The comparative results are exhibited for the present method and the conventional o-phenanthroline method.     

Factors affecting the nodule size of asymmetric PMMA membranes

Several factors that may affect the surface nodule size of a polymeric membrane were under investigation. The increase of polymer concentration and molecular weight were found to increase the surface nodule size. The increase of casting temperature also resulted in an increase in nodule size. These results supported that the radius of gyration and the collision frequency between polymer chains were the key factors affecting the nodule size. However, when the radius of gyration was reduced by the use of a poor solvent or by pre-adding nonsolvent in the casting solution, the surface nodule size increased. It suggested that there existed other factors affecting the nodule size on membrane surface besides the gyration radius and the collision frequency of polymer chains. In this study, we found in most cases that the surface nodule size decreased along with the surface tension difference between the casting solution and the coagulant. To demonstrate the effect of surface tension, we examined the nodule size inside the membranes where the nodule formation was not significantly affected by the interfacial tension. Opposite to what was observed on the surface, the nodule size increased with the solvation power of the solvent. This result suggested that it was the interfacial tension that overpowered the gyration radius in affecting the surface nodule size.     

Nucleation and growth mechanism for the electropolymerization of aniline on highly oriented pyrolytic graphite at higher potentials

In this work, the nucleation and growth mechanism for the electropolymerization of aniline was investigated at higher potentials on highly oriented pyrolytic graphite by potentiostatic current-time transient and atomic force microscopic (AFM) measurements. The electrochemical data fitted to the theoretical curves for the nucleation and growth suggest that electropolymerization of aniline follows the three-dimensional growth and progressive nucleation mechanism. These results were also compared with the results obtained at lower potentials. The results obtained from transient analysis, at higher potentials, were in good agreement with the results of AFM images. Electronic Publication     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.     

Microwave activation of electrochemical processes: enhanced PbO2 electrodeposition, stripping and electrocatalysis

Microwave activation of electrochemical processes has recently been introduced as a new technique for the enhancement and control of processes at electrode|solution (electrolyte) interfaces. This methodology is extended to processes at glassy carbon and boron-doped diamond electrodes. Deposition of both Pb metal and PbO₂ from an aqueous solution of Pb²⁺ (0.1 M HNO₃) are affected by microwave radiation. The formation of PbO₂ on anodically pre-treated boron-doped diamond is demonstrated to change from kinetically sluggish and poorly defined at room temperature to nearly diffusion controlled and well defined in the presence of microwave activation. Calibration of the temperature at the electrode|solution (electrolyte) interface with the Fe^3+/2+ (0.1 M HNO₃) redox system allows the experimentally observed effects to be identified as predominantly thermal in nature and therefore consistent with a localized heating effect at the electrode|solution interface. The microwave-activated deposition of PbO₂ on boron-doped diamond remains facile in the presence of excess oxidizable organic compounds such as ethylene glycol. An increase of the current for the electrocatalytic oxidation of ethylene glycol at PbO₂/boron-doped diamond electrodes in the presence of microwave radiation is observed. Preliminary results suggest that the electrodissolution of solid microparticles of PbO₂ abrasively attached to the surface of a glassy carbon electrode is also enhanced in the presence of microwave radiation. Electronic Publication     

Determination of unbound cefamandole in rat blood by microdialysis and microbore liquid chromatography

To analyze unbound cefamandole in rat blood, a method combing microdialysis with microbore liquid chromatography has been developed. A microdialysis probe was inserted into the jugular vein/right atrium of male Sprague-Dawley rats to examine the unbound cefamandole level in the rat blood following cefamandole administration (50 mg/kg, i.v.). The dialysates were directly submitted to a liquid chromatographic system. Samples were eluted with a mobile phase containing acetonitrile-methanol-100 mM monosodium phosphate (pH 5.0; 15:20:65, v/v). The UV wavelength was set at 270 nm for monitoring the analyte. Using the retrograde method, at infusion concentrations of 1 microg/mL of cefamandole, the in vivo microdialysis recoveries were 55.44% for the rat blood (n = 6). Intra- and inter-assay accuracy and precision of the analyses were < or = 10% in the range of 0.1-10 microg/mL. Pharmacokinetic parameters were calculated from the recovery-corrected dialysate concentrations of cefamandole vs time data. The elimination half-life (t1/2,beta) was 21.6 +/- 1.6 min. The results suggest that the pharmacokinetics of unbound cefamandole in blood following cefamandole administration (50 mg/kg, i.v., n = 5) fit best to the two-compartmental model.     

Evaluation on thermal stability and kinetics of 2,2′-azobis(2,4-dimethyl)valeronitrile in aerobic and anaerobic conditions under isothermal process

Journal of Thermal Analysis and Calorimetry - We quantified the thermal stability of 2,2′-azobis(2,4-dimethyl)valeronitrile (ADVN) under isothermal conditions through thermogravimetry (TG),...     

Evaluation of food-processing conditions of various particle sizes of <Emphasis Type="Italic">Tremella fuciformis</Emphasis> powder via DSC and TG analyses

Tremella fuciformis (Berk.), also known as silver ear, has a high economic value due to being a valuable edible and medicinal mushroom. The focus of this study was on the various particle sizes of 80–300 mesh (particle diameters from 2 mm to 250 μm) for freeze-drying silver ear powder in order to determine the water-holding capacity, viscosity, and crude polysaccharide content of various particle sizes. Our aim was to determine the possible conditions for silver ear powder for food processing under the conditions of oxidation/non-oxidation and heat treatment. Overall, we obtained various particle sizes of silver ear powder, the water-holding capacity decreased from 21.84 to 14.82 g g^?1, the viscosity increased from 8.53 to 71.20 cP, and the content of crude polysaccharides, which remained almost constant, was approximately 300 mg g^?1. In addition, the smaller the particle size of silver ear powder, the greater the thermal stability of the particles by differential scanning calorimetry (DSC) and thermogravimetric (TG) tests. The results for various particle sizes of silver ear powder in food processing are never more than ca. 240 °C by DSC tests. Moreover, comparing the results of thermal decomposition using TG analyzer under nitrogen and air conditions, in nitrogen, the various particle sizes have better preservation for storage conditions and the smaller particle size powders retained good thermal decomposition characteristics.     

Efficient acid catalytic synthesis of pyrazolopyrimidines from 1H-pyrazol-5-yl-N,N-dimethylformamidines with cyanamide

The efficient acid catalytic synthesis of pyrazolo [3,4-d]pyrimidine was developed by treating 1H-pyrazol-5-yl-N,N-dimethylformamidine with various aminating agents including N,O-bis(trimethylsilyl)hydroxylamine (NHSiMe₃(OSiMe₃)), cyanamide (NH₂CN), hydroxylamine (NH₂OH), methoxyamine (NH₂OMe), hydrazine (NH₂NH₂), and urea (NH₂C(O)NH₂) in acidic solution at reflux. Based on the experimental result, cyanamide (NH₂CN) and methanesulfonic acid were indicated the best aminating agent and acid mediated solvent. On the other hands, the reactivity tendency was involved the activity of original leaving species grafting on the aminating agents, such as –OH, –OMe, –OSiMe₃, –NH₂, –OSiMe₃, –C(O)NH₂, and –CN, in acid catalytic heterocyclic reaction.