Ozonolysis of five-membered heterocycles

The relative reaction rate of five-membered heterocycles with ozone was evaluated. These relative rates were correlated to the highest bond order value in the corresponding ring, calculated by the convenient HMO method. From this correlation, the reactivity of heterocycles with ozone was able to be predicted. Also it was concluded that the predominant product in the ozonolysis of five-membered heterocycles containing an oxygen atom was the corresponding carboxylic acid, while nitrogen heterocycles gave the corresponding amide.     

Performance of throughout in-capillary derivatization capillary electrophoresis employing an on-line sample and run buffer loading device

We report on the effect on performance of varying the length of the capillary during throughout in-capillary derivatization (TICD) capillary electrophoresis (CE). Performance was evaluated by on-line coupling with a sample and CE runbuffer loading device that was newly introduced for this study. The device was assembled with a low cost using two 5 mm inner diameter (ID) disposable polyethylene syringes. First, a sequence was manually formed consisting of a 200 microL run buffer solution plug, a 100 microL sample plug and another 200 microL run buffer solution plug. Each plug was separated from its neighbor by a 100 microL air plug. When each plug reached the injection point where both a platinum-wire anode and the end of the separation capillary tube were located, 340 V/cm separation voltage (electrophoresis voltage) and 34 V/cm injection voltage were applied to the capillary for 3 s. Then the analytes were derivatized during migration in 50 microm ID capillaries filled with 2 mM o-phthalaldehyde (OPA)/N-acetylcysteine (NAC) in a 20 mM phosphate-borate buffer (pH 10), followed by separating and detecting of OPA derivatives by absorbance of 340 nm. Derivatization, separation, and detection were performed systematically using capillaries which varied in length from 5 to 80 cm. In the case of TICD-CE of a mixture containing 1 mM aspartic acid (Asp) and 20 mM m-nitorophenol (MNP) as a test solution, it was determined that peak area and peak width ratios of Asp to MNP did not depend on capillary length. Enantiomeric separations of DL-alanine (Ala) and Asp were examined using a run buffer consisting of a 45 microM beta-cyclodextrin (CD)-2 mM OPA/NAC-20 mM phosphate-borate buffer (pH 10). Even though the resolution of these enantiomeric pairs decreased with decreasing capillary length, as expected, the peaks corresponding to both enantiomeric amino acids were identified even when a 5 cm capillary was used. An 8-component amino acid mixture was also tested with 5 cm and 10 cm capillaries.     

Reaction of octafluorocyclopentene with various carbon nucleophiles

The treatment of octafluorocyclopentene with organolithium reagents gave the corresponding symmetrical disubstituted perfluorocyclopentenes in good to high yields. The reaction with Grignard reagents led to the monosubstituted perfluorocyclopentenes, which were subjected to the further nucleophilic substitution reaction using another Grignard or aryllithium reagents, unsymmetrical disubstituted perfluorocyclopentenes being obtained in high yields.     

Magnetic microcapsules for targeted delivery of anticancer drugs

To achieve targeted distribution of anticancer drugs with sustained activity, ferromagnetic ethylcellulose microcapsules containing an anticancer drug, mitomycin C (FM-MMC-mc), were prepared by a method based on phase separation principles. Two prototypes of FM-MMC-mc were made: one with the drug as the core and zinc ferrite on its capsular surface (outer type); the other with both the drug and zinc ferrite as the core (inner type). Both preparations provided a sustained-release property and a sensitive response to conventional magnetic force, although certain differences in the release rate of drug, magnetic responsiveness, and particle size were found between the two dosage forms. Animal studies showed that the magnetic microcapsules could be magnetically controlled in the artery and urinary bladder. VX2 tumors in the rabbit hind limb and urinary bladder were successfully treated with magnetic control of FM-MMC-mc. Pharmacokinetic study revealed that the targeting of the microcapsules markedly enhanced the drug absorption into the surrounding tissues for a prolonged period of time. The results indicate the feasibility and effectiveness of the magnetic microcapsules as a targeted drug delivery system.     

Ethenesulfonamide derivatives, a novel class of orally active endothelin-A receptor antagonists

In the present article we wish to report the discovery of a novel class of ET(A)-selective endothelin (ET) receptor antagonists through the modification of the ET(A)/ET(B) non-selective antagonist, Ro47-0203 (Bosentan, 1). Replacement of the benzenesulfonamide group of 1 with a 2-phenylethenesulfonamide group gave compound 5a and resulted in improvement in ET(A)-selectivity. Optimization of the alkoxy side chain attached to the core pyrimidine ring yielded the 2-fluoroethoxy derivative (5n) with further improvement of ET(A)-selectivity. [IC50=2.1 nM for ET(A) receptor, ET(B)/ET(A) ratio=1200]. After oral administration, compound 5n inhibited the big ET-1 induced pressor response in pithed rats with a DR2 value of 2.6 mg/kg and also exhibited a potent antagonistic activity in conscious rats.     

CO2 laser Stark spectroscopy of the Coriolis-coupled ν2 and ν5 bands of CD3Br

The ν₂ (CD₃ symmetrical deformation) and ν₅ (CD₃ degenerate deformation) fundamental bands of CD₃Br were studied by 9.4- and 10.4-μm CO₂ laser Stark spectroscopy. Stark resonances originating from 28 and 53 rovibrational transitions of the ν₂ and ν₅ bands, respectively, were assigned for each of the isotopic species, CD₃⁷⁹Br and CD₃⁸¹Br. These two bands were simultaneously analyzed with explicit inclusion of the ν₂-ν₅ Coriolis interaction, yielding precise molecular constants in the ν₂ and ν₅ excited states as well as the Coriolis coupling constant. The molecular constants obtained are consistent between the two isotopic species and are in good agreement with the results of high-resolution infrared studies. The band origins and dipole moments are

     

57.

Unambiguous Determination of the Absolute Configurations of Acetylene Alcohols by Combination of the Sonogashira Reaction and the CD Exciton Chirality Method – Exciton Coupling between Phenylacetylene and Benzoate Chromophores     

Junpei Naito  Yoko Yamamoto  Megumi Akagi  Satoshi Sekiguchi  Masataka Watanabe  Nobuyuki Harada 《Monatshefte für Chemie / Chemical Monthly》2005,60(1):411-445

The CD exciton chirality method was applied to various phenylacetylene alcohols to determine their absolute configurations; the long axis polarized –^* transition (_max=252nm) of the 4-methoxyphenylacetylene chromophore couples with the transition (_max=257nm) of the 4-methoxybenzoate group to generate intense exciton split CD Cotton effects, from the signs of which the absolute configurations of phenylacetylene alcohols were unambiguously determined. As an extension of the results, a new methodology for determining the absolute configurations of acetylene alcohols having the HCCCH(OH)-moiety by combination of the Sonogashira reaction and the CD exciton chirality method has been developed and applied. Since the –^* transition of acetylene triple bond is located below 180nm, it is difficult to observe ideal bisignate CD Cotton effects due to the exciton coupling between acetylene and benzoate chromophores. To observe the ideal exciton split Cotton effects necessary for the unambiguous determination of absolute configuration, the terminal acetylene group was converted, by the Sonogashira reaction, to the 4-methoxyphenylacetylene moiety, which exhibits an intense –^* absorption band polarized along the long axis of the chromophore at 252nm. As a partner of exciton coupling, 4-methoxybenzoate showing a –^* band at 257nm was introduced into the alcohol moiety, and the benzoates formed showed intense bisignate CD Cotton effects, from the signs of which the absolute configurations of original acetylene alcohols could be determined in an unambiguous manner.     

58.

Diarylurea-linked zinc porphyrin dimer as a dual-mode artificial receptor: supramolecular control of complexation-facilitated photoinduced electron transfer     

Yagi S  Ezoe M  Yonekura I  Takagishi T  Nakazumi H 《Journal of the American Chemical Society》2003,125(14):4068-4069

A novel porphyrinic receptor 1 in which two zinc porphyrins are bridged by two diarylurea linkers was developed for recognition of a viologen derivative (hexyl viologen, HV). The electronic absorption spectra as well as the 1H NMR experiments revealed that the HV molecule was bound to the cleft in 1 mainly through carbonyl dipole-charge interactions to afford a 1:1 complex. From the steady-state fluorescence spectroscopic study, the photoinduced electron transfer (PET) from 1 to HV was extremely facilitated by the receptor-substrate complexation. The receptor 1 also formed a 1:1 complex with 1,4-diazabicyclo[2.2.2]octane (DABCO) through two Zn-N coordination interactions, and, using DABCO as an inhibitor, we suppressed the PET reaction via the substrate exchange.     

59.

Site-specific incorporation of a photo-crosslinking component into RNA by T7 transcription mediated by unnatural base pairs     

Kimoto M  Endo M  Mitsui T  Okuni T  Hirao I  Yokoyama S 《Chemistry & biology》2004,11(1):47-55

     

60.

Stereospecific polymerization of isobutyl vinyl ether. III. Polymerization with VCl3 • LiCl     

Yasushi Joh  Koichi Harada  Heimei Yuki  Shunsuke Murahashi 《Journal of polymer science. Part A, Polymer chemistry》1971,9(4):1089-1102

The polymerization of isobutyl vinyl ether by vanadium trichloride in n-heptane was studied. VCl₃ ? LiCl was prepared by the reduction of VCl₄ with stoichiometric amounts of BuLi. This type of catalyst induces stereospecific polymerization of isobutyl vinyl ether without the action of trialkyl aluminum to an isotactic polymer when a rise in temperature during the polymerization was depressed by cooling. It is suggested that the cause of the stereospecific polymerization might be due to the catalyst structure in which LiCl coexists with VCl₃, namely, VCl₃ ? LiCl or VCl₂ ? 2LiCl as a solid solution in the crystalline lattice, since VCl₃ prepared by thermal decomposition of VCl₄ and a commercial VCl₃ did not produce the crystalline polymer and soluble catalysts such as VCl₄ in heptane and VCl₃ ? LiCl in ether solution did not yield the stereospecific polymer. It was found that some additives, such as tetrahydrofuran or ethylene glycol diphenyl ether, to the catalyst increased the stereospecific polymerization activity of the catalysts. Influence of the polymerization conditions such as temperature, time, monomer and catalyst concentrations, and the kind of solvent on the formed polymer was also examined.     

[首页] « 上一页 [1] [2] [3] [4] [5] 6 [7] [8] [9] [10] [11] 下一页 » 末  页»

		CD379Br		CD381Br
$\text{ν}{}_2$		991.396 82 (18)		991.388 46 (17)		cm?1
$\text{ν}{}_5$		1055.469 00 (12)		1055.466 32 (12)		cm?1
$\text{μ}{}_0$		1.830 42 (52)		1.829 84 (47)		D
$\text{μ}{}_2$		1.829 93 (48)		1.829 57 (46)		D
$\text{μ}{}_5$		1.832 23 (60)		1.831 19 (56)		D

Unambiguous Determination of the Absolute Configurations of Acetylene Alcohols by Combination of the Sonogashira Reaction and the CD Exciton Chirality Method – Exciton Coupling between Phenylacetylene and Benzoate Chromophores

The CD exciton chirality method was applied to various phenylacetylene alcohols to determine their absolute configurations; the long axis polarized –^* transition (_max=252nm) of the 4-methoxyphenylacetylene chromophore couples with the transition (_max=257nm) of the 4-methoxybenzoate group to generate intense exciton split CD Cotton effects, from the signs of which the absolute configurations of phenylacetylene alcohols were unambiguously determined. As an extension of the results, a new methodology for determining the absolute configurations of acetylene alcohols having the HCCCH(OH)-moiety by combination of the Sonogashira reaction and the CD exciton chirality method has been developed and applied. Since the –^* transition of acetylene triple bond is located below 180nm, it is difficult to observe ideal bisignate CD Cotton effects due to the exciton coupling between acetylene and benzoate chromophores. To observe the ideal exciton split Cotton effects necessary for the unambiguous determination of absolute configuration, the terminal acetylene group was converted, by the Sonogashira reaction, to the 4-methoxyphenylacetylene moiety, which exhibits an intense –^* absorption band polarized along the long axis of the chromophore at 252nm. As a partner of exciton coupling, 4-methoxybenzoate showing a –^* band at 257nm was introduced into the alcohol moiety, and the benzoates formed showed intense bisignate CD Cotton effects, from the signs of which the absolute configurations of original acetylene alcohols could be determined in an unambiguous manner.     

Diarylurea-linked zinc porphyrin dimer as a dual-mode artificial receptor: supramolecular control of complexation-facilitated photoinduced electron transfer

A novel porphyrinic receptor 1 in which two zinc porphyrins are bridged by two diarylurea linkers was developed for recognition of a viologen derivative (hexyl viologen, HV). The electronic absorption spectra as well as the 1H NMR experiments revealed that the HV molecule was bound to the cleft in 1 mainly through carbonyl dipole-charge interactions to afford a 1:1 complex. From the steady-state fluorescence spectroscopic study, the photoinduced electron transfer (PET) from 1 to HV was extremely facilitated by the receptor-substrate complexation. The receptor 1 also formed a 1:1 complex with 1,4-diazabicyclo[2.2.2]octane (DABCO) through two Zn-N coordination interactions, and, using DABCO as an inhibitor, we suppressed the PET reaction via the substrate exchange.     

Stereospecific polymerization of isobutyl vinyl ether. III. Polymerization with VCl3 • LiCl

The polymerization of isobutyl vinyl ether by vanadium trichloride in n-heptane was studied. VCl₃ ? LiCl was prepared by the reduction of VCl₄ with stoichiometric amounts of BuLi. This type of catalyst induces stereospecific polymerization of isobutyl vinyl ether without the action of trialkyl aluminum to an isotactic polymer when a rise in temperature during the polymerization was depressed by cooling. It is suggested that the cause of the stereospecific polymerization might be due to the catalyst structure in which LiCl coexists with VCl₃, namely, VCl₃ ? LiCl or VCl₂ ? 2LiCl as a solid solution in the crystalline lattice, since VCl₃ prepared by thermal decomposition of VCl₄ and a commercial VCl₃ did not produce the crystalline polymer and soluble catalysts such as VCl₄ in heptane and VCl₃ ? LiCl in ether solution did not yield the stereospecific polymer. It was found that some additives, such as tetrahydrofuran or ethylene glycol diphenyl ether, to the catalyst increased the stereospecific polymerization activity of the catalysts. Influence of the polymerization conditions such as temperature, time, monomer and catalyst concentrations, and the kind of solvent on the formed polymer was also examined.