Effect of aromatic substitution on the cure reaction and network properties of anhydride cured triphenyl ether tetraglycidyl epoxy resins

A systemic study of the impact of aromatic substitution on the reaction rate and network properties of the isomers of a tetraglycidylaniline triphenyl ether epoxy resin cured with anhydride hardeners is presented here. The epoxy resins synthesized in this work were based upon N,N,N,N‐tetraglycidyl bis(aminophenoxy)benzene (TGAPB), where the glycidyl aniline and ether groups change from being all meta (133 TGAPB), to meta and para (134 TGAPB), and finally to an all para substituted epoxy resin (144 TGAPB). Increasing para substitution increased reaction rate, promoted the onset of vitrification and increased epoxide conversion. Thermal properties such as glass transition temperatures (T_g) and coefficients of thermal expansion (CTE) both increased consistently with increasing para substitution, although thermal stability as measured via thermogravimetric analysis decreased. Mechanical properties also varied systematically with flexural strength and ductility increasing with increased para substitution, while the modulus decreased. Indeed, the ductility almost doubled, as measured by the work of fracture and displacement at failure highlighting the importance of substitution on properties.     

Ni-catalyzed hydroboration and hydrosilylation of olefins with diboron and silylborane

Herein we report a Ni-catalyzed formal hydroboration of olefins, which afforded anti-Markovnikov-type alkylboranes with B₂pin₂ and a stoichiometric amount of water. Formal hydrosilylation using air- and moisture-sensitive silylboranes also proceeded under optimized conditions. The reaction with trans-stilbene and D₂O resulted in 1,2-H migration, which suggested that the reaction proceeded via β-hydride elimination and reinsertion mechanisms.     

Reduced expression of <Emphasis Type="Italic">TAC1</Emphasis>, <Emphasis Type="Italic">PENK</Emphasis> and <Emphasis Type="Italic">SOCS2</Emphasis> in <Emphasis Type="Italic">Hcrtr-2</Emphasis> mutated narcoleptic dog brain

Background  

Narcolepsy causes dramatic behavioral alterations in both humans and dogs, with excessive sleepiness and cataplexy triggered by emotional stimuli. Deficiencies in the hypocretin system are well established as the origin of the condition; both from studies in humans who lack the hypocretin ligand (HCRT) and in dogs with a mutation in hypocretin receptor 2 (HCRTR2). However, little is known about molecular alterations downstream of the hypocretin signals.     

Enantioselective Catalytic [4+1]-Cyclization of ortho-Hydroxy-para-Quinone Methides with Allenoates

The first highly asymmetric catalytic synthesis of densely functionalized dihydrobenzofurans is reported, which starts from ortho-hydroxy-containing para-quinone methides. The reaction relies on an unprecedented formal [4+1]-annulation of these quinone methides with allenoates in the presence of a commercially available chiral phosphine catalyst. The chiral dihydrobenzofurans were obtained as single diastereomers in yields up to 90 % and with enantiomeric ratios up to 95:5.     

Microemulsion electrokinetic chromatography as a suitable tool for lipophilicity determination of acidic,neutral, and basic compounds

In the present work, several MEEKC systems are studied to assess their suitability for lipophilicity determination of acidic, neutral, and basic compounds. Thus, several microemulsion compositions over a wide range of pH values (from 2.0 to 12.0), containing heptane, 1?butanol and different types and amounts of surfactant (SDS or sodium cholate: from 1.3 to 3.3%) are characterized using Abraham's solvation model. The addition of acetonitrile (up to 10%) is also studied, since it increases the resolution of the technique for the most lipophilic compounds. The system coefficients obtained are very similar to those of the 1?octanol/water, used as the reference lipophilicity index, allowing simple and linear correlations between the 1?octanol/water partition values (log P_o/w) and MEEKC mass distribution ratios (log k_MEEKC). Variations in the microemulsion composition (aqueous buffer, surfactant, concentration of ACN) did not significantly affect the similarity of the MEEKC systems to log P_o/w partition.     

Use of micellar mobile phases for the chromatographic determination of clorazepate, diazepam, and diltiazem in pharmaceuticals

An ODS-2 column, a micellar mobile phase of high elution strength containing 0.1M sodium dodecyl sulfate and 3% (v/v) butanol, and ultraviolet detection at 230 nm are used for the determination of either of two benzodiazepines (clorazepate and diazepam) and a benzothiazepine (diltiazem) in pharmaceuticals. The procedure is shown to be competitive against conventional chromatography with methanol-water mobile phases, especially for diltiazem. The composition of the micellar mobile phase is selected using a predictive strategy based on an accurate retention model and assisted by computer simulation. Calibration graphs are linear at least in the 2.5 to 20 microg/mL, 4 to 20 microg/mL, and 5 to 40 microg/mL ranges for clorazepate, diazepam, and diltiazem, respectively. The intra- and interday repeatabilities (%) are clorazepate (1.7, 5.2), diazepam (0.43, 3.7), and diltiazem (0.36, 3.1). Limits of detection are well below the concentrations of the drugs found in the commercial pharmaceutical preparations analyzed. The drug contents evaluated with the proposed procedure are compared with the declared contents given by the manufacturers. The achieved percentages of label claim are usually between 95 and 104%.     

DFT-calculated structure of protonated tetraphenyl p - tert -butylcalix[4]arene tetraketone

Using DFT calculations, two of the most probable structures (A, B) of the tetraphenyl p-tert-butylcalix[4]arene tetraketone·H₃O⁺ cationic complex species were derived. The hydroxonium ion H₃O⁺, placed in the coordination cavity formed by the calix[4]arene lower-rim groups, is bound by strong hydrogen bonds to the phenoxy oxygen atoms of the calix[4]arene ligand (structures A, B) and also to one carbonyl oxygen (structure B).     

Understanding the Supramolecular Self‐Assembly of the Fullerene Derivative PCBM on Gold Surfaces

We report a DFT study on the self‐assembly of the fullerene derivative PCBM on the Au(111) surface. Recent STM experiments (Angew. Chem. 2007 , 119, 8020–8023^[1]) show a coverage‐dependent transition of the adsorption and self‐assembly of PCBM on this surface. To understand the origin of this observation, we compute the geometries and relative energies of ten PCBM dimers and four tetramers. The calculations show that the self‐assembly of PCBM at high coverage is mainly controlled by hydrogen bonding between the PCBM tails. Due to the large size of the fullerene cage, the hydrogen bonds are formed far away from the surface; hence they are very similar to those found in the gas phase. This picture successfully explains the observed site‐insensitive adsorption at high coverage and the 2D arrangement of PCBM on the surface.