Combination of flow injection analysis and voltammetry

The flow injection analyzer for students, teaching and research (FIAstar) is used in conjunction with a new micropool mercury flow-through electrode, to explore the possibilities offered by using d.c. polarography, rapid scan and amperometric titrations on a dispersed sample zone in motion. The work outlines the principles of the use of a scanning detector for investigation of the concentration gradients and chemical reactions taking place during the dispersion of sample solution within a carrier stream. The data, which are collected in real time, are displayed in three-dimensional diagrams.     

Evaluation of thallium-201 myocardial emission computed tomography based on a comparison with postmortem findings

The correlative study of myocardial perfusion assessed by 201Tl myocardial ECT with the pathological finding of the heart was performed in 10 autopsied cases with mean age of 77 years old (range: 60-90 y). In 6 cases with myocardial infarction (MI) 7 perfusion defects were observed, that was, 3 in anteroseptal wall, 1 in anterolateral wall and 3 in posterior wall on the images of SPECT. Seven MIs were also found in postmortem examination. Six MIs were observed at autopsy corresponding to perfusion defect on SPECT images. In one myocardial perfusion defect at inferoposterior portion on SPECT, a non-transmural MI was found at anteroseptum. In one case with valvular disease a false positive result was obtained at posterior wall where neither myocardial necrosis nor fibrosis was observed at autopsy. This case had aortic stenosis due to bicuspid aortic valve by autopsy. The ventricle was divided into 16 segments in each of 4 short axial images to evaluate extent of MI. SPECT for extent of MI showed sensitivity of 81.9%, specificity of 96.0% and diagnostic accuracy of 92.5%. False negative segment was apt to be observed at the surrounding of non-transmural MI or basal half of left ventricle (LV) with transmural MI, while false positive segment was at posterior portion of basal half of LV. It was concluded that myocardial ECT was useful for evaluation of the site and extent of MI.     

Magnetic and spectral properties of the coligand isomer pair: Cu{N(CN)2}2(pyrazole)2 and Cu{pyrazole · N(CN)2}2

Summary New coligand isomers of composition Cu{N(CN)₂}₂(pz)₂ and Cu{pz · N(CN)₂}₂ (pz = pyrazole) were prepared and studied by measuring their magnetic susceptibilities up to 4.2K and by aid of their e.s.r., ligand field and i.r. spectra. The susceptibility data have been analysed with various models for the exchange-coupled copper(II) polymers. It is shown that the resultant exchange coupling is ferromagnetic for Cu{N(CN)₂}₂(pz)₂ (J 1.1 - 1.4 cm^–1) but antiferromagnetic for Cu{pz · N(CN)₂}₂ (J –0.4 cm^–1). A polymeric chain structure is proposed for Cu{N(CN)₂}₂(pz)₂ havingpseudo-octahedrally coordinated copper(II) and CN-bridging dicyanamide ligands. Its coligand isomer contains anionic chelate ligands, formed by nucleophilic addition between N(CN)₂ and pz in the copper(II) coordination sphere, and giving with this central atom a square-planar system. Definite, but slight axial interaction takes place between these structure units.     

Fitting properties from density functional theory based molecular dynamics simulations to parameterize a rigid water force field

In the quest towards coarse-grained potentials and new water models, we present an extension of the force matching technique to parameterize an all-atom force field for rigid water. The methodology presented here allows to improve the matching procedure by first optimizing the weighting exponents present in the objective function. A new gauge for unambiguously evaluating the quality of the fit has been introduced; it is based on the root mean square difference of the distributions of target properties between reference data and fitted potentials. Four rigid water models have been parameterized; the matching procedure has been used to assess the role of the ghost atom in TIP4P-like models and of electrostatic damping. In the former case, burying the negative charge inside the molecule allows to fit better the torques. In the latter, since short-range interactions are damped, a better fit of the forces is obtained. Overall, the best performing model is the one with a ghost atom and with electrostatic damping. The approach shown in this paper is of general validity and could be applied to any matching algorithm and to any level of coarse graining, also for non-rigid molecules.     

Protein conformational gating of enzymatic activity in xanthine oxidoreductase

In mammals, xanthine oxidoreductase can exist as xanthine dehydrogenase (XDH) and xanthine oxidase (XO). The two enzymes possess common redox active cofactors, which form an electron transfer (ET) pathway terminated by a flavin cofactor. In spite of identical protein primary structures, the redox potential difference between XDH and XO for the flavin semiquinone/hydroquinone pair (E(sq/hq)) is ~170 mV, a striking difference. The former greatly prefers NAD(+) as ultimate substrate for ET from the iron-sulfur cluster FeS-II via flavin while the latter only accepts dioxygen. In XDH (without NAD(+)), however, the redox potential of the electron donor FeS-II is 180 mV higher than that for the acceptor flavin, yielding an energetically uphill ET. On the basis of new 1.65, 2.3, 1.9, and 2.2 ? resolution crystal structures for XDH, XO, the NAD(+)- and NADH-complexed XDH, E(sq/hq) were calculated to better understand how the enzyme activates an ET from FeS-II to flavin. The majority of the E(sq/hq) difference between XDH and XO originates from a conformational change in the loop at positions 423-433 near the flavin binding site, causing the differences in stability of the semiquinone state. There was no large conformational change observed in response to NAD(+) binding at XDH. Instead, the positive charge of the NAD(+) ring, deprotonation of Asp429, and capping of the bulk surface of the flavin by the NAD(+) molecule all contribute to altering E(sq/hq) upon NAD(+) binding to XDH.     

Determination of 1-hydroxypyrene in human urine by HPLC with electrochemical detection at a boron-doped diamond film electrode

A high-performance liquid chromatographic method with electrochemical detection (HPLC-ED) at a boron-doped diamond film electrode with preliminary separation and preconcentration by solid-phase extraction (SPE) has been developed for the determination of 1-hydroxypyrene (1-HP) in human urine. 1-HP is among the most widely used biomarkers of exposure to polycyclic aromatic hydrocarbons. Optimal HPLC-ED conditions have been found: mobile phase methanol-0.05 mol L(-1) phosphate buffer pH 5.0 (80:20, v/v), detection potential +1,000 mV versus Ag/AgCl (3 mol L(-1) KCl), and flow rate 0.8 mL min(-1). For SPE, LiChrolut(?) RP-18 E cartridges were used. The extraction yield was (87.0 ± 5.8)% (n = 5). The concentration dependence of 1-HP was measured in the concentration range from 0.01 to 10 μmol L(-1) (2.18-2,180 μg L(-1)) using methanolic solutions resulting from the SPE pretreatment of spiked human urine samples. The limit of detection (signal-to-noise ratio 3) and the limit of quantification (signal-to-noise ratio 10) of the biomarker were 0.013 μmol L(-1) (2.84 μg L(-1)) and 0.043 μmol L(-1) (9.39 μg L(-1)), respectively, which is sufficient for its determination in the urine of persons exposed to polycyclic aromatic hydrocarbons.     

Possible Mechanisms of Intercalation

Recent knowledge of the kinetics and intercalation mechanisms are summarized and accompanied by examples of intercalation reactions of water and ethanol into anhydrous vanadyl phosphate and redox intercalation of alkali metal cations into vanadyl phosphate dihydrate. Three possible mechanisms of intercalation are presented which are based on: (i) a concept of exfoliation of layers; (ii) the formation of stages and randomly stacked layers; (iii) co-existence of intercalated and non-intercalated parts of crystals of the host separated by an advancing phase boundary. The corresponding kinetic curves are ascribed to mechanisms (ii) and (iii).     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

Linear interval inequalities

We prove that a system of linear inequalities with interval-valued data is weakly solvable (each system obtained by fixing coefficeints in the intervals prescribed has a solution) if and only if it is strongly solvable (all such systems have a solution in common) and desribe an algorithm for checking strong solvability.