Monitoring nano-flow rate of water by atomic emission detection using helium radio-frequency plasma

Recently, high-performance nano-scale flow pumping systems have been developed for micro and miniaturized analysis systems. A novel device capable of measuring and monitoring nanoliter scale flow rates has been required for the further development of the pumping system. In this study, an atomic emission detector using helium radio-frequency plasma (RFP-AED) was used for the measurement of the nanoliter scale flow rate of water by quantitatively detecting the emission from hydrogen in the water molecules. Monitoring nano-flow rates of water in the range up to 1.0 microl min(-1), and the change in the flow rate by the indication of the ratio of the emissions of H (656.3 nm) and He (667.8 nm) were successful. At present, the lowest flow rate that could be determined reproducibly was 4 nl min(-1) calculated as five times the standard deviation of the background noise. Additionally, similar evaluations for the deviation of each flow rate by using the RFP-AED and a flow-injection system were produced.     

Elimination of the 4-hydroxyl group of the alkaloids related to morphine—II

Dihydrothebaine-φ, dihydrothebainone-Δ⁵-enol methylether and dihydrothebainone were converted to the respective 4-phenylethers by Ullmann reaction in good yields. These phenylether derivatives were reduced to 4-desoxy compounds by sodium-liquid ammonia reduction.

Clemmensen reduction of the phenylether and the desoxy derivatives gave (-)-3-methoxy-4-phenoxy-N-methyl-morphinan and (-)-3-methoxy-N-methylmorphinan respectively.     

Oscillating frequency of piezoelectric quartz crystal in solutions

Oscillating frequencies of a piezoelectric crystal were measured in various solutions. One side of the crystal surface was coated with a silicon sealant. This coating was useful for measuring the oscillation of crystals in solutions for a wide range of products of density (?) and viscosity (η) and in electrolyte solutions. For measurement in solutions, the frequency change depended on the circuit used, whereas for measurements in air the circuit did not influence the frequency change. All experimental data showed that the frequency change from pure water, ΔF_w, followed ΔF_w = ? K(√?η ? √?_wη_w) except for electrolyte and polymer solutions, where K is a proportionality constant, η_w the density of pure water and η_w the viscosity of water.     

Large-scale separation of metallic and semiconducting single-walled carbon nanotubes

In the applications of single-walled carbon nanotubes (SWNTs), it is extremely important to separate semiconducting and metallic SWNTs. Although several methods have been reported for the separation, only low yields have been achieved at great expense. We show a separation method involving a dispersion-centrifugation process in a tetrahydrofuran solution of amine, which makes metallic SWNTs highly concentrated to 87% in a simple way.     

Conformational Studies on Polytripeptides as a Model of Collagen

To study the role of glycine residues in stabilizing the collagen triple helix, the glycine residues in the polytripeptide (Pro-Ala-Gly)_n were partially replaced by alanine. The proline content was kept constant. The stability of the helical conformation of these polypeptides was studied by IR- and X-ray measurements in the solid state and by ORD, CD and viscometry in solution. The renaturation was followed as a function of time. All the polytripeptides studied, with the exception of (-Pro-Ala-Ala-)_n attained the polyproline II conformation. However the stability decreased with increasing alanine content. Obviously the molecules of (-Pro-Ala-Gly-) are highly associated by intermolecular hydrogen bonds and one may therefore suppose that a triple-stranded helix aggregation occurs. The results of the refolding process show that the stability of the helices seems to also affect the refolding rate in terms of the optical rotation, Two transitions appeared: the first one is responsible for a rapid reversible change in conformation and the second one for a further slow and irreversible change in the hydrodynamic shape. The latter seems to be due to the partial helical nature, leading to higher chain mobility.     

Proof of the Fukui conjecture via resolution of singularities and related methods. II $$^{\star}$$

The present article is a direct continuation of the first part of this series. We reduce a proof of the Fukui conjecture (concerning the additivity problem of the zero-point vibrational energies of hydrocarbons) to that of a proposition related to the theory of algebraic curves, so that we can focus on the key mechanism of the additivity phenomena. Namely, by establishing what is called the Basic Piecewise Monotone Theorem (BPMT), we reduce a proof of the Fukui conjecture to that of a proposition, called the Local Analyticity Proposition, Version 1 (LAP1), which admits a proof via resolution of singularities. By LAP1, the essential part of the mechanism of the asymptotic linearity phenomena is extracted and is elucidated by using tools from the mathematical theory of algebraic curves, whose language is of vital importance in analyzing the crux of the additivity mechanism. Dedicated to the memory of Prof. Kenichi Fukui (1918–1998).     

Characterization of molecular transport in poly(dimethylsiloxane) microchannels for electrophoresis fabricated with synchrotron radiation-lithography and UV-photolithography

In the present paper, a study was undertaken of molecular transport in ploy(dimethylsiloxane) microchannels that were fabricated by ultraviolet (UV)-photolithography and synchrotron radiation (SR)-lithography characterized and compared for microchip capillary electrophoresis by evaluating in-channel molecular dispersion. A fluorescent tag, sulforhodamine B was used as the probing molecule. It was found that microchannels made by SR-lithography fabrication were superior to those made by UV-photolithography fabrication in terms of molecular transport performance. A deep insight into surface conditions characterized by scanning electron microscopy suggested it was related to the difference in surface roughness. Chromatographic retention in electropherograms further supported such a conclusion, which depended on the phase ratio of the channel surface. The results revealed for PDMS microchannels in this work were in good agreement with the phenomenon found for glass microchannels in the literature.     

Side chain-directed assembly of triangular molecular panels into a tetrahedron vs. open cone

Despite their structural similarity, triangular tetradentate ligands 2b and 2c experience different assembly pathways on complexation with (en)Pd(NO3)2 to give M8L4 tetrahedral (3) and open cone (4) structures, respectively, due to steric restriction by side chains at the corner or on the edge of the ligands.     

Effect of Organic Ligands Used in Sol-Gel Process on the Formation of Mullite

The preparation of mullite by the sol-gel method using organic polydentate ligands and the effect of the raw materials and organic polydentate ligands on the formation of mullite were investigated. Two series of samples were prepared using tetraethoxyorthosilicate (TEOS) and aluminum nitrate nonahydrate, or dibutoxyethylacetoacetatoaluminum (Al(OBu)₂(AcAcEt)) as the silica and alumina sources, respectively, and using ethylene glycol (EG), 1,3-propanediol (PD), 1,3-butanediol (BD), 2-methyl-2, 4-pentanediol (MPD), diethlene glycol monoethyl ether (DEME) and ethoxyethanol as the ligands. When the alumina source was aluminum nitrate nonahydrate, mullite was apt to appear in the order of EG>PD>MPD. When Al(OBu)₂(AcAcEt) was the alumina source, the tendency toward the appearance of mullite crystalline phase was EG>BD>DEME>MPD. Between the two alumina sources, aluminum nitrate nonahydrate gave mullite much easier than Al(OBu)₂(AcAcEt). These relationships were discussed from the viewpoints of the coordination ability of the ligands and the miscibility between the silica and alumina.