Structural Study of Phase Transition Behavior of Uniaxially-Oriented Ethylene-Tetrafluoroethylene Alternating Copolymer

Crystal modifications and phase transition behavior have been investigated for the uniaxially-oriented ethylene-tetrafluoroethylene alternating copolymer samples of equimolar content by the temperature-dependent X-ray diffraction and Raman spectral measurements. The X-ray fiber diagram measured for the sample drawn at 0 °C has been found to be quite different from that drawn above 100 °C or the normal orthorhombic-type sample. The new X-ray diagram is characterized by the sharpness of the reflections and the positional shift from the horizontal lines, indicating the tilting phenomenon of the crystallites. This sample was found to transform into the hexagonal phase in the temperature region around 110 °C with keeping the tilting phenomenon. The molecular motion of the more or less conformationally disordered chains was enhanced above this transition region as seen from the increase in the half-width of trans bands and the intensity increment of gauche bands in the Raman spectra.     

Synthesis of aromatic polyethers by Scholl reaction. V. Synthesis and polymerization of 1,3-bis[4-(1-naphthoxy) benzoyl]benzene, 1,4-bis[4-(1-naphthoxy)benzoyl]benzene,bis[4-(1-naphthoxy)phenyl]methane, 1,3-bis[4-(1-naphthoxy) phenylmethyl]benzene,and 1,4-bis-[4-(1-naphthoxy)phenylmethyl]benzene

This article describes the synthesis and the cation-radical polymerization (Scholl reaction) of 1,3-bis[4-(1-naphthoxy) benzoyl] benzene ( 6 ) and 1,4-bis[4-(1-naphthoxy) benzoyl]- benzene ( 7 ) initiated by FeCI₃. This polymerization produced poly(ether ether ketone ketone)s (PEEKK) of number average molecular weight (M?_n) up to 5400 g/mol. The synthesis of bis[4-(1-naphthoxy) phenyl] methane ( 8 ), 1,3-bis[4-(1-napthoxy) phenylmethyl] benzene ( 9 ), and 1,4-bis[4-(1-naphthoxy) phenylmethyl] benzene ( 10 ) are also described. Polyethers of M?_n up to 15400 g/mol at a FeCl₃/monomer molar ratio of 2/1 were obtained. An increased polymerizability of the monomers 9 and 10 containing two CH₂ groups versus that of the corresponding monomers containing two carbonyl groups ( 6 and 7 ) was observed. This enhanced polymerizability was explained based on the increased nucleophilicity of monomers 9 and 10 .     

Electrochemical approach to monitoring metal exchange reaction of acetylacetonate complexes with cadmium, copper and zinc ions

Metal exchange reactions of acetylacetonate complexes with Cd(II), Cu(II) and Zn(II) ions were investigated by using cadmium and copper ion selective electrodes. Changes in the electrode potential and pH of the solutions were monitored upon adding the pertinent metal Zn(II) of the acetylacetonate (AA) complexes. In the reverse system in which a stable Cu-AA complex exists in the solution prior to adding a secondary metal ion (Cd(II) or Zn(II)), no Cu(II) was replaced by either ion. In the systems containing Cd(II) and Zn(II) as a complexed form with AA or as free ions, the exchange reactions were not explained by considering the equilibrium stability constants of the Cd-AA and Zn-AA complexes.     

Sample stacking of fast-moving anions in capillary zone electrophoresis with pH-suppressed electroosmotic flow

On-line sample concentration of fast moving inorganic anions by large volume sample stacking (LVSS) and field enhanced sample injection (FESI) with a water plug under acidic conditions is presented. Detection sensitivity enhancements were around 100 and 1000-fold for LVSS and FESI, respectively. However, reproducibility and linearity of response in the LVSS approach is superior compared to the FESI approach.     

Optimum heat treatment conditions for masking the bitterness of the clarithromycin wax matrix

The effects of the contents of aminoalkyl methacrylate copolymer E (AMCE) in a wax matrix on the mechanism of polymorphic transformation of glyceryl monostearate (GM) were clarified by evaluating the enthalpy change defined as 1.51 (DeltaH(1)-DeltaH(2))/DeltaH(2), where DeltaH(1) and DeltaH(2) denote the enthalpies in the first and second thermal analyses, respectively. Using this value, K(1), the rate constant of transformation from alpha-form to beta'-form, and K(2), the rate constant of transformation from beta'-form to beta-form, could be obtained. As the ratio of AMCE increased, K(2) increased, but a minimum point existed for K(1). K(1) was always larger than K(2), but gradually approached K(2) as the ratio of AMCE increased. The optimum temperature for the transformation of GM was 50 degrees C, at which the enthalpy change was maximum. To prepare the wax matrix preparation of clarithromycin (CAM), we considered 40 degrees C the optimum treatment temperature for the transformation of GM in a CAM wax matrix compounded from CAM, GM and AMCE, since the matrices were mutually welded at above 45 degrees C during the spray congealing process. Although K(1) and K(2) were almost the same at 40 degrees C, the rate of transformation was accelerated by tumbling. By applying the tumbling that accelerated the transformation of GM in a CAM wax matrix, almost all of the alpha-form disappeared, and the release of CAM from the wax matrix diminished when the enthalpy change was more than 0.8.     

Synthesis and Ni(0)-catalyzed oligomerization of isomeric 4,4‴-dichloroquaterphenyls

4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ), 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ), and 4,4?-dichloro-1,1′ : 4′,1″ : 4″,1?-quaterphenyl ( 11 ) were synthesized by Pd (0) catalyzed cross-coupling reaction of 4-chlorobenzeneboronic acid with 2,2′-, 3,3′-, and 4,4′-bis (trifluoromethanesulfonyloxy)biphenyl respectively. 4,4?-Dichloro-1,1′ : 2′,1″ : 2″,1?-quaterphenyl ( 9 ) and 4,4?-dichloro-1,1′ : 3′,1″ : 3″,1?-quaterphenyl ( 10 ) were oligomerized by Ni(0) catalyzed homocoupling reaction to yield white and soluble oligophenylenes. © 1993 John Wiley & Sons, Inc.     

Reactivity characteristics of squid β-chitin as compared with those of shrimp chitin: High potentials of squid chitin as a starting material for facile chemical modifications

Chemical reactivity of β-chitin isolated from squid pens has been examined in various reactions to elucidate the possibility of facile modifications in simple manners leading to the preparation of derivatives with well-defined structures. β-Chitin swelled in common solvents such as methanol and pyridine unlike the ordinary α-chitin and exhibited much higher reactivity than β-chitin. Free amino groups present in β-chitin were easily and selectively acetylated with acetic anhydride in methanol to give chitin with a uniform structure, poly(N-acetyl-D-glucosamine). When acetylation reaction was carried out in pyridine, O-acetylation proceeded smoothly besides N-acetylation. In the presence of 4-dimethylaminopyridine as the catalyst, even full acetylation was achieved under mild conditions. Tosylation was also quite efficient in pyridine without side reactions such as N-deacetylation which is unavoidable in the tosylation of α-chitin. β-Chitin also enabled direct tritylation in pyridine in the presence of 4-dimethylaminopyridine. All these reactions were quite sluggish with β-chitin, and no reactions or only very low extents of substitution were observed, indicating the high potential of β-chitin as a versatile starting material for facile modification reactions. © 1994 John Wiley & Sons, Inc.     

Radioactivation analysis of hair a means of biological monitoring of the environment

With the aim of indicating environmental pollution effects by heavy metals on humans using hair, nondestructive activation analysis was applied to 382 normal Japanese hair samples (background level). Elemental contents of hair could be determined for Ag, Al, As, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, Hg, I, K, La, Mg, Mn, Na, S, Sb, Sc, Se, Sm, Ti, V and Zn. As these elements in hair have wide concentration ranges, the differences in concentrations distribution between groups (sex, age, permanent treatment and regional difference) are discussed. A method for hair sampling is presented.     

Proof of the Fukui conjecture via resolution of singularities and related methods: III

The present article is a direct continuation of the second part of this series. In conjunction with the analysis of the energy band curves of carbon nanotubes, we develop here fundamental theoretical tools, which are essential to prove the Local Analyticity Proposition (LAP). The LAP enables one to prove the Fukui conjecture (the guiding conjecture for developing the repeat space theory) in a new and powerful context of the theory of algebraic curves and resolution of singularities. The present fundamental tools also serve as modular tools for the repeat space theory, by which one can solve a variety of additivity and molecular network problems in a unifying manner.     

Synthesis of the optically active key intermediate of FR901483

Efficient synthesis of the tricyclic key intermediate 2 for (−)-FR901483 1 was accomplished. The precursor of the intramolecular aldol reaction 4b is constructed by the Ugi 4CC reaction and subsequent intramolecular Dieckmann condensation. This approach allows a fully stereocontrolled total synthesis of (−)-FR901483, which would provide various derivatives.