High-sensitivity analyses of metabolites in biological samples by capillary electrophoresis using dynamic pH junction-sweeping

Emerging fields of biochemical research, such as metabolomics, present challenges to current separation technologies because of the large number of metabolites present in a cell and their often low (submicromolar) concentration. Although capillary electrophoresis (CE) holds great promise as the method of choice for high-resolution separations of biological samples, it suffers from poor concentration sensitivity, especially with the use of UV detection. In CE, sweeping and dynamic pH junction represent two complementary on-line focusing techniques that have been used for sensitivity enhancement of hydrophobic and weakly acidic analytes, respectively. However, the application of either the sweeping or dynamic pH junction technique alone might, in some cases, be less effective for the analysis of certain sample mixtures. Recent work in the development of a hyphenated dynamic pH junction-sweeping technique is presented as an effective on-line method of preconcentration suitable for both hydrophilic (anionic) and hydrophobic (neutral) analytes. Sensitive analyses of flavin metabolites by CE with laser-induced fluorescence (LIF) detection is demonstrated in various biological matrixes, including cell extracts of Bacillus subtilis, pooled human plasma, as well as heat-deproteinized flavoenzymes. Enhanced analyte band narrowing and improved sensitivity is achieved for flavins using dynamic pH junction-sweeping compared to either sweeping or dynamic pH junction alone. This results in over a 1200-fold improvement in sensitivity relative to conventional injection methods, giving a limit of detection (LOD, defined as S/N = 3) of about 4.0 x 10(-12) M. Strategies for sensitive and more comprehensive analyses of other cell metabolites, including nucleotides, coenzymes, and steroids, are also discussed when using on-line focusing techniques in conjunction with multiplexed CE and UV detection.     

Effects of ortho-substituents on reactivities,tacticities, and ceiling temperatures of radical polymerizations of phenyl methacrylates

Radical polymerization and copolymerization of some o-alkylphenyl methacrylates were carried out and the effect of the ortho-substituents on the ability to homopolymerize, on the monomer reactivities, and on the ceiling temperatures of the monomers was studied. The effect of the substituent on tacticities and thermal stabilities of the polymers formed was also discussed. The ability to honiopolymerize and the monomer reactivity were considerably decreased by the introduction of the o-substituent. 2,6-Di-tert-butylphenyl methacrylate formed no methanol-insoluble polymer at 60°C. On the basis of the tacticity determined it was noted that the o-substituted phenyl methacrylates preferred syndiotactic addition in the propagation reaction less than did phenyl methacrylate or methyl methacrylate. The polymers formed from the o-substituted monomers were thermally less stable than poly(phenyl methacrylate), and, consistent with this finding, ceiling temperatures of the o-substituted phenyl methacrylates seemed to be lower than that of phenyl methacrylate. The effects observed were characteristic of the o-substituents conformationally close to the carbon-carbon double bond of the monomer or the carbon carrying the unpaired electron of the polymer radical.     

Photocatalytic Organic Syntheses: Selective Cyclization of Amino Acids in Aqueous Suspensions

Photocatalytic reactions occurring at semiconductor particles/solution interfaces can be applied to organic syntheses. In this review article, examples of photocatalytic syntheses of cyclic amino acids by suspended semiconductor particles, e.g., titanium(IV) oxide or cadmium(II) sulfide are introduced and interpreted. Different from the photocatalytic decomposition of pollutants under aerobic conditions, selective conversion of organic compounds can be driven by the photocatalytic reactions under deaerated conditions.     

Subsecond separation of cellular flavin coenzymes by microchip capillary electrophoresis with laser-induced fluorescence detection

In this article, it was demonstrated that a subsecond separation of cellular metabolites such as riboflavin (RF), flavin mononucleotide (FMN), and flavin-adenine dinucleotide (FAD) was achieved using microchip capillary electrophoresis with laser-induced fluorescence detection. The influences of crucial parameters that governed analysis time (e.g., channel length and electric field for separation) and separation resolution (e.g., sample size) were investigated, both in theoretical aspects and experimental practice. Quantitative analyses were performed that exhibited linear dynamic range of two orders of magnitude, with calculated detection limits of 34, 201, and 127 nM for RF, FAD, and FMN, respectively. To test the validity of the method, it was successfully applied to characterize several recombinant flavin-binding domains in a human neuronal nitric oxide synthase.     

Electrochemical formation of stable ferrocene anion and the formal rate constant of the ferrocene0/− electrode

A reversible cyclic voltammogram for the one-electron reduction of ferrocene in 1,2-dimethoxyethane is recorded under experimental conditions that enable the ferrocene anion to exist for a few minutes. The formal rate constant of the ferrocene^0/? electrode, determined by cyclic voltammetry at ?45°C, ca. 10^?3 cm s^?1, is in striking contrast with that of ferrocene^+/0, > 10^?1 cm s^?1. The distortion of the ferrocene molecule caused by reduction may be a reason for this difference in electron-transfer rate.     

Chiral separation of trimetoquinol hydrochloride and related compounds by micellar electrokinetic chromatography using sodium taurodeoxycholate solutions and application to optical purity determination

The chiral separation of trimetoquinol hydrochloride, which is a bronchodilator (Inolin), and three related compounds by micellar electrokinetic chromatography was investigated using a bile salt as a chiral surfactant. Enantiomers of these compounds, except laudanosoline, were successfully separated within 12 min using a separation tube of effective length 500 mm × 0.05 rum i.d. and a 0.05 M sodium taurodeoxycholate solution of pH 7.0. The observed theoretical plate numbers of the peaks were ca. 150000. Chiral recognition was affected by the structure of bile salts, the pH of the buffer solutions used and the structure of the solutes. Of four kinds of bile salts, successful chiral separation was achieved only using sodium taurodeoxycholate solution under neutral conditions. The method was applied to the optical purity determination of trimetoquinol hydrochloride. The effects of surfactant concentrations and some additives to the micellar solution are briefly described.     

Ab initio calculations on the clustering energies and stable structures of H(M)+ + M → H(M)2+ (M = CO and N2)

The clustering energies of the reactions, H(M)⁺+ M → H(M)⁺₂ (M = CO and N₂), were calculated by ab initio single configuration LCAO SCF MO and SCEP methods. The calculated energies are in good agreement with the experimental enthalpies.     

Robust and simple interface for microchip electrophoresis-mass spectrometry

A robust and simple interface for microchip electrophoresis-mass spectrometry (MCE-MS) was developed using a spray nozzle connected to the exit of the separation channel of the microchip. The spray nozzle was attached to the microchip using a polyether ether ketone screw without adhesive, thus allowing easy replaced. Sample injection and electrophoretic separation was performed by control of the voltage only. The analysis of a few basic drugs was performed using the optimized MCE-MS system. The separation was improved by using a high-viscosity separation buffer and a spray nozzle with a small bore size. This system was also applied to the separation of peptides and protein-trypsin digests. Sample adsorption was minimized by adding acetonitrile to the separation buffer when using a quartz microchip.     

Syntheses and structures of hypervalent pentacoordinate carbon and boron compounds bearing an anthracene skeleton--elucidation of hypervalent interaction based on X-ray analysis and DFT calculation

Pentacoordinate and tetracoordinate carbon and boron compounds (27, 38, 50-52, 56-61) bearing an anthracene skeleton with two oxygen or nitrogen atoms at the 1,8-positions were synthesized by the use of four newly synthesized tridentate ligand precursors. Several carbon and boron compounds were characterized by X-ray crystallographic analysis, showing that compounds 27, 56-59 bearing an oxygen-donating anthracene skeleton had a trigonal bipyramidal (TBP) pentacoordinate structure with relatively long apical distances (ca. 2.38-2.46 A). Despite the relatively long apical distances, DFT calculation of carbon species 27 and boron species 56 and experimental accurate X-ray electron density distribution analysis of 56 supported the existence of the apical hypervalent bond even though the nature of the hypervalent interaction between the central carbon (or boron) and the donating oxygen atom was relatively weak and ionic. On the other hand, X-ray analysis of compounds 50-52 bearing a nitrogen-donating anthracene skeleton showed unsymmetrical tetracoordinate carbon or boron atom with coordination by only one of the two nitrogen-donating groups. It is interesting to note that, with an oxygen-donating skeleton, the compound 61 having two chlorine atoms on the central boron atom showed a tetracoordinate structure, although the corresponding compound 60 with two fluorine atoms showed a pentacoordinate structure. The B-O distances (av 2.29 A) in 60 were relatively short in comparison with those (av 2.44 A) in 59 having two methoxy groups on the central boron atom, indicating that the B-O interaction became stronger due to the electron-withdrawing nature of the fluorine atoms.     

Guest-induced assembly of tetracarboxyl-cavitand and tetra(3-pyridyl)-cavitand into a heterodimeric capsule via hydrogen bonds and CH-halogen and/or CH-pi interaction: control of the orientation of the encapsulated guest

The guest- or solvent-induced assembly of a tetracarboxyl-cavitand 1 and a tetra(3-pyridyl)-cavitand 2 into a heterodimeric capsule 1.2 in a rim-to-rim fashion via four intermolecular CO(2)H.N hydrogen bonds has been investigated both in solution and in the solid state. In the (1)H NMR study, a 1:1 mixture of1a and 2a (R = (CH(2))(6)CH(3)) in CDCl(3) gave a mixture of various complicated aggregates, whereas this mixture in CDCl(2)CDCl(2) or p-xylene-d(10) exclusively produced the heterodimeric capsule 1a.2a. It was found that an appropriate 1,4-disubstituted-benzene is a suitable guest for inducing the exclusive formation of 1a.2a in CDCl(3). The ability of a guest to induce the formation of guest-encapsulating heterodimeric capsule, guest@(1a.2a), increased in the order p-ethyltoluene < 1-ethyl-4-methoxybenzene < or = 1-ethyl-4-iodobenzene < or = 1,4-dibromobenzene < 1-iodo-4-methoxybenzene < or= 1,4-dimethoxybenzene < or = 1,4-diiodobenzene. The (1)H NMR study revealed that a CH-halogen interaction between the inner protons of the methylene-bridge rims (-O-H(out)CH(in)-O-) of the 1a and 2a units and the halogen atoms of 1,4-dihalobenzenes and a CH-pi interaction between the methoxy protons of 1,4-dimethoxybenzene and the aromatic cavities of the 1a and 2a units play important roles in the formation of 1,4-dihalobenzene@(1a.2a) and 1,4-dimethoxybenzene@(1a.2a), respectively. A preliminary single-crystal X-ray diffraction analysis of guest@(1b.2b) (R = (CH(2))(2)Ph; guest = 1-iodo-4-methoxybenzene or p-xylene) confirmed that the guest encapsulated in 1b.2b is oriented with the long axis of the guest along the long axis of 1b.2b and that the iodo and the methoxy groups of the encapsulated 1-iodo-4-methoxybenzene are specifically oriented with respect to the cavities of the 2b and 1b units, respectively.