Polarization memory of luminescence from photo-generated carriers in aSixC1−x:H (x∼0.2)

Photoluminescence of aSi_xC_1?x:H (x～0.2) is studied with a particular interest on the localization of carriers. Taking the polarization memory of luminescence as a probe, we clarify the localized character of photo-generated carriers as functions of excitation photon energy, emitted photon energy, temperature and time. The picosecond time-resolved measurement of the polarization memory is shown useful to study dynamical relaxation processes of carriers in disordered systems.     

Development of high-radiation-sensitive polymer gel for magnetic resonance imaging in three-dimensional dosimetry

We developed a high radiation sensitive polymer gel by modifying the amounts of the gel components and the temperature for the gel preparation. We evaluated its relaxation time linearity against dose and compared the measured dose distribution with the calculated one. For the relaxation time-dose linearity, irradiations were carried out with a linear accelerator using 6 MV photons and doses ranging from 0-5.0 Gy. The relationship between dose and R(2) value (reciprocal of T(2) relaxation time) was measured and it had good linearity over a wide range (0.3-5 Gy). The measured dose distributions were in good agreement with calculated ones. Since the present gel has higher sensitivity and it is synthesized more easily at lower cost than conventional polymer gels, we expect to see improved three-dimensional (3D) dosimetry using it.     

Pyrolysis of amines: Infrared spectrum of methyleneimine

Methyleneimine was detected in the gas phase by a moderately high resolution infrared spectrometer as one of the intermediate species produced by a pyrolysis of amines. Observed vibrational frequencies of some isotopic derivatives have been combined with the ab initio values to reach a most reliable force constants set. Some other spectroscopic parameters, involving geometrical parameters and dipole moment derivatives, have also been calculated ab initio and compared with the observation. Its half-life in our experimental apparatus was about 10 min, which is much longer than the previously reported values, 0.1 or 10 sec.     

X-ray structure analysis of trans-1,4-polybutadiene

The crystal structure of trans-1,4-polybutadiene has been reported by Natta et al. to be pseudo-hexagonal below its solid-phase transition temperature. In the present X-ray structure analysis, it is revealed that the crystal belongs to the monoclinic system with the space group P2¹/a. The unit cell, with the lattice constants a = 8.63 Å, b = 9.11 Å, c = 4.83 Å, and β = 114°, includes four molecular segments.     

Chemical etching op fission tracks in ethylene-tetrafluoroethylene copolymer

The chemical etching of fission tracks in ethylene-tetrafluoro-ethylene copolymer was studied. Etched holes 3000–4000 Å in diameter was recognized by electron microscopy for a film bombarded by fission fragments in oxygen and etched in a 12N sodium hydroxide solution at 125°C. The radial etching rate at 125°C was 6–8 Å/hr, which is less than 17 Å/hr for polyvinylidene fluoride in the same sodium hydroxide concentration at 85°C. The smaller rate is a reflection of the larger chemical resistivity of ethylene-tetrafluoro-ethylene copolymer than polyvinylidene fluoride.     

Multibubble sonoluminescence enhancement by fluid flow

Forced fluid flow can cause the enhancement of multibubble sonoluminescence (SL) under suitable conditions. The effect of directional flow with a circulator is similar to that of rotating flow with a stirrer. The mechanism of the enhancement is that both flows prevent cavitation bubbles from coalescing and clustering, which are responsible for the quenching of SL. The intensity of sonochemiluminescence (SCL) in an aqueous luminol solution increases with flow speed at higher ultrasonic powers more significantly than that of SL in distilled water. However, in the range of low ultrasonic power, the intensities of SL and SCL decrease with flow speed. Therefore, an optimum flow speed exists in relation to ultrasonic power and frequency.     

Phase behavior and Li+ Ion conductivity of styrene‐ethylene oxide multiblock copolymer electrolytes

Solid polymer electrolytes are attractive materials for use as battery separators. Here, a molecular weight series of polystyrene–polyethylene oxide (PEO) multiblock copolymers was synthesized by the thiol–norbornene click reaction. The subsequent materials were characterized both neat and with a lithium bis‐(trifluoromethane)sulfonimide salt loading [(Li)/(EO)] of 0.1. In general, neat samples demonstrated crystallinity scaling with PEO content. Lithium ion‐containing samples had broad scattering peaks, half of which displayed disordered scattering, even at the lowest block molecular weights (polystyrene = 1 kg/mol, PEO = 1 kg/mol). Fitting of disordered scattering data, using the random phase approximation, yielded χ_RPA and R_g values that were compared with recent predictive work by Balsara and coworkers. The predictions were accurate near the volume fraction f_PEO = 0.5 but deviated symmetrically with volume fraction asymmetry. Samples were also analyzed by electrochemical impedance spectroscopy for their potential to conduct lithium ions. Samples with f_PEO ≥ 0.5 demonstrated robust conductivity, whereas samples below this volume fraction conducted very poorly, with one exception (f_PEO = 0.24). This work expanded upon our recently reported approach to multiblock copolymer synthesis, demonstrating the improved access of materials to further our fundamental understanding of multiblock copolymers. Copyright © 2016 John Wiley & Sons, Ltd.     

Magneto-Optical Properties of Silica Gel Containing Magnetite Fine Particles

The magnetic composite materials that consist of transparent matrix and magnetic fine particles are expected to have large residual magnetization and coercive force because of their fine magnetic domain structure, and also to show magneto-optical effects. Silica gels containing magnetite (Fe₃O₄) fine particles were prepared by sol-gel method. The magnetic, optical and magneto-optical properties of the composites were investigated by measurements of magnetization curves, UV-visible spectra and Faraday rotation in visible range. The saturation magnetization of the composite was almost as same as that expected from the amount of magnetite fine particles in it. Although the composites had large and broad absorption at around 400 nm, they still maintained their transparency. The origins of decrement of transparency attributed to the optical absorption of magnetite and scattering due to magnetite fine particles. The whole composites showed positive Faraday rotation under external static magnetic field due to the large contribution of diamagnetic silica gel matrix. Magnetite contributed negative Faraday rotation with maximum at around 470–480 nm to the magneto-optical spectra of the composites.