Facile synthesis of urea derivatives under mild conditions

Urea derivatives were readily synthesized in good yields under quite mild conditions, i.e., at ambient pressure and room temperature by sulfur-assisted carbonylation of primary amines with carbon monoxide followed by oxidation of the resulting ammonium thiocarbamates with molecular oxygen.     

Effects of polymerization method on structure and properties of thermoplastic polyurethanes

The effects of the dynamic polymerization method and temperature on the molecular aggregation structure and the mechanical and melting properties of thermoplastic polyurethanes (TPUs) were successfully clarified. TPUs were prepared from poly (ethylene adipate) glycol (M_n = 2074), 4,4′‐diphenylmethane diisocyanate and 1,4‐butanediol by the one‐shot (OS) and the prepolymer (PP) methods in bulk at dynamic polymerization temperatures ranging from 140 to 230 °C. Glass‐transition temperatures (T_gs) of the soft segment and melting points (T_ms) of the hard segment domains of OS‐TPUs increased and decreased, respectively, with increasing polymerization temperatures, but those of PP‐TPUs were almost independent of the polymerization temperature. T_gs of the soft segment and T_ms of the hard segment domains of these TPUs polymerized above 190 °C were almost the same regardless of the polymerization method. Solid‐state nuclear magnetic resonance spectroscopy (NMR) analyses of OS‐ and PP‐TPUs showed that the relative proton content of fast decay components, which corresponds to the hard segment domains, in these TPUs decreased with increasing polymerization temperatures. These results clearly show that the degree of microphase separation becomes weaker with increasing polymerization temperatures. The temperature dependence of dynamic storage modulus and loss tangent of OS‐TPUs coincided with those of PP‐TPUs at polymerization temperature above 190 °C. The apparent shear viscosity for OS‐ and PP‐TPUs polymerized above 190 °C approached a Newtonian behavior at low shear rates regardless of the polymerization method. These results indicate that TPUs polymerized at higher temperatures form almost the same molecular aggregation structures irrespective of the dynamic polymerization method. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 800–814, 2007     

Local environments and dynamics of hydrogen atoms in protonated forms of ion-exchangeable layered perovskites estimated by solid-state H NMR

The local environments and dynamics of hydrogen atoms in five samples of protonated forms of ion-exchangeable layered perovskites, Dion-Jacobson-type H[LaNb₂O₇] and H[LaTa₂O₇], Ruddlesden-Popper-type H₂[SrTa₂O₇] and H₂[La₂Ti₃O₁₀], and H_1.8[(Sr_0.8Bi_0.2)Ta₂O₇] derived from an Aurivillius phase, Bi₂Sr₂Ta₂O₉, have been investigated by solid-state ¹H nuclear magnetic resonance spectroscopy (NMR). Solid-state ¹H NMR with a magic-angle spinning technique conducted at room temperature reveals that the mean electron densities around the ¹H nuclei in these protonated forms are relatively low, and that they decrease in the following order: H_1.8[(Sr_0.8Bi_0.2)Ta₂O₇]>H[LaNb₂O₇]>H₂[SrTa₂O₇]>H[LaTa₂O₇]>H₂[La₂Ti₃O₁₀]. The temperature-dependent solid-state ¹H broad-line NMR spectra measured at 140-400 K reveal a decrease in the signal width for all of these five samples upon heating due to motional narrowing. The NMR spectra of H[LaNb₂O₇] and H[LaTa₂O₇] are different from the other three protonated forms due to the weaker dipole-dipole interactions at low temperatures and lower mobility of the hydrogen atoms at high temperatures.     

Production of D-lactic acid by bacterial fermentation of rice starch

D-Lactic acid was synthesized by the fermentation of rice starch using microorganisms. Two species: Lactobacillus delbrueckii and Sporolactobacillus inulinus were found to be active in producing D-lactic acid of high optical purity after an intensive screening test for D-lactic acid bacteria using glucose as substrate. Rice powder used as the starch source was hydrolyzed with a combination of enzymes: alpha-amylase, beta-amylase, and pullulanase to obtain rice saccharificate consisting of maltose as the main component. Its average gross yield was 82.5%. Of the discovered D-lactic acid bacteria, only Lactobacillus delbrueckii could ferment both maltose and the rice saccharificate. After optimizing the fermentation of the rice saccharificate using this bacterium, pilot scale fermentation was conducted to convert the rice saccharificate into D-lactic acid with a D-content higher than 97.5% in a yield of 70%. With this yield, the total yield of D-lactic acid from brown rice was estimated to be 47%, which is almost equal to the L-lactic acid yield from corn. The efficient synthesis of D-lactic acid can open a way to the large scale application of high-melting poly(lactic acid) that is a stereocomplex of poly(L-lactide) and poly(D-lactide). Schematic representation of the production of D-lactic acid starting from brown rice as described here.     

Nitrogen-14 NMR Study on Solvent Exchange of the Octahedral Cobalt(II) Ion in Neat 1,3-Propanediamine and n-Propylamine at Various Temperatures and Pressures. Tetrahedral-Octahedral Equilibrium of the Solvated Cobalt(II) Ion in n-Propylamine As Studied by EXAFS and Electronic Absorption Spectroscopy

Solvated cobalt(II) ions in neat 1,3-propanediamine (tn) and n-propylamine (pa) have been characterized by electronic absorption spectroscopy and extended X-ray absorption fine structure (EXAFS) spectroscopy. The equilibrium between tetrahedral and octahedral geometry for cobalt(II) ion has been observed in a neat pa solution, but not in neat diamine solutions such as tn and ethylenediamine (en). The thermodynamic parameters and equilibrium constant at 298 K for the geometrical equilibrium in pa were determined to be DeltaH degrees = -36.1 +/- 2.3 kJ mol(-1), DeltaS degrees = -163 +/- 8 J mol(-1) K(-1), and K(298) = 6.0 x 10(-3) M(-2), where K = [Co(pa)(6)(2+)]/{[Co(pa)(4)(2+)][pa](2)}. The equilibrium is caused by the large entropy gain in formation of the tetrahedral cobalt(II) species. The solvent exchange of cobalt(II) ion with octahedral geometry in tn and pa solutions has been studied by the (14)N NMR line-broadening method. The activation parameters and rate constants at 298 K for the solvent exchange reactions are as follows: DeltaH() = 49.3 +/- 0.9 kJ mol(-1), DeltaS() = 25 +/- 3 J mol(-1) K(-1), DeltaV() = 6.6 +/- 0.3 cm(3) mol(-1) at 302.1 K, and k(298) = 2.9 x 10(5) s(-1) for the tn exchange, and DeltaH() = 36.2 +/- 1.2 kJ mol(-1), DeltaS() = 35 +/- 6 J mol(-1) K(-1), and k(298) = 2.0 x 10(8) s(-1) for the pa exchange. By comparison of the activation parameters with those for the en exchange of cobalt(II) ion, it has been confirmed that the kinetic chelate strain effect is attributed to the large activation enthalpy for the bidentate chelate opening and that the enthalpic effect is smaller in the case of the six-membered tn chelate compared with the five-membered en chelate.     

Conversion of 6-protoilludene into illudin-M and -S by omphalotusolearius

Deuterium labeled $\text{dl}$-6-protoilludene ($\text{7}$) was synthesized and fed to the illudin-producing fungus $\text{Omphalotus}$$\text{olearius}$ (ATCC 11719). The hydrocarbon ($\text{7}$) was incorporated into illudin-M ($\text{2}$) and -S ($\text{3}$).     

Novel synthesis of high molecular weight polymers with extremely low polydispersity by the unique initiation properties of organo-lanthanide complexes

Organolanthanide(III) complexes such as |(C₅Me5₅)₂SmH|₂ and (C₅Me₅)₂SmMe(THF) were found to initiate the living polymerizations of methyl methacrylate (MMA) to give high molecular weight polymers (M _n > 500 × 10³) with extremely low polydispersity (M _w/M_n = 1.04). The syndiotacticity increased up to 95.2% by lowering the temperature to −95°C. The molecular structure of the 1:2 adduct of (C₅Me₅)₂SmH with MMA determined by X-ray method indicates that this intermediate assumes the 8 membered ring conformation where the Sm atom is bound to MMA in an enolate form and the ester of penultimate MMA is coordinated to the metal. Based upon these results, an anionic coordination mechanism has been proposed for the present reaction. Organolanthanide(II) complexes also exhibit high activity and proceed the living polymerizations. Organolanthanide(III) complexes also initiate the living polymerizations of lactones such as ϵ-caprolactone and δ-valerolactone. The stoichiometric reactions indicate that real active species assumes the alkoxylanthanide(III) form.     

Crystal Structure of Zinc(II) Complexes with 2-Ethyl-3-hydroxy-4H-pyran-4-thione and 2-Ethyl-3-hydroxy-4H-pyran-4-selenone

Crystallography Reports - Zn(II) complexes with 2-ethyl-3-hydroxy-4H-pyran-4-thione, [Zn(ehpt)2], and 2-ethyl-3-hydroxy-4H-pyran-4-selenone, [Zn(ehps)2], were synthesized and characterized by...     

Design of a new multi‐turn ion optical system ‘IRIS’ for a time‐of‐flight mass spectrometer

A new multi‐turn ion optical system ‘IRIS’ has been designed for use with a high‐performance time‐of‐flight (TOF) mass spectrometer, which satisfies the new design concepts of time focusing and phase space stability. It has an elliptical flight path composed of four toroidal electric sectors, with a flight path length for one lap of 0.974 m. Dimensions and voltages of sector electrodes have been optimized to satisfy theoretical requirements by simulations using surface charge method. Generally, multi‐turn instruments require an injection and ejection system to inject and eject ions. On the basis of this ion optical study, we have designed an injection and ejection ion optical system, which achieves time focusing for the total system. Furthermore, we have designed novel field‐adjusting electrodes (FAEs) for the perforated sectors in the injection and ejection systems, which accurately correct the electric potential around the perforated sector's hole. We have also used simulations to evaluate mass resolving power and ion transmissions for various lap numbers or flight path lengths. Through these we have confirmed that mass resolving powers of over 100 000 can be achieved with reasonable ion transmissions for a given set of initial conditions. Usually a multi‐turn TOF mass spectrometer with a closed optic axis has mass range limitations from overtaking ions. To solve this problem, a TOF segmentation method is proposed that identifies all peaks in a TOF spectrum, including those from overtaking ions. Copyright © 2008 John Wiley & Sons, Ltd.