Stabilization of the Parametric Resonance of a Cantilever Beam by Bifurcation Control with a Piezoelectric Actuator

In this work, bifurcation control using a piezoelectric actuator isimplemented to stabilize the parametric resonance induced in acantilever beam. The piezoelectric actuator is attached to the surfaceof the beam to produce a bending moment in the beam. The dimensionlessequation of motion for the beam with the piezoelectric actuator on itssurface is derived and the modulation equations for the complexamplitude of an approximate solution are obtained using the method ofmultiple scales. We then acquire the bifurcation set that expresses theboundary of the stable and unstable regions. The bifurcation set ischaracterized by the modulation equations. Next, we determine the orderof feedback gains to modify these modulation equations. By actuating thepiezoelectric actuator under the appropriate feedback, bifurcationcontrol is carried out resulting in the shift of the bifurcation set andthe expansion of the stable region. The main characteristic of thestabilization method introduced above is that the work done by thepiezoelectric actuator is zero in the state where the parametricresonance is stabilized. Thus zero power control is realized in such astate. Experimental results show the validity of the proposedstabilization method for the parametric resonance induced in thecantilever beam.     

Positron/positronium annihilation in nanocrystalline silicon thin films

Positron and positronium annihilation investigations were applied to nanocrystalline silicon (nc-Si) thin films, for the first time. The nc-Si thin films with average grain diameters of 3–5 nm show intense blue luminescence at room temperature. The nanometer-sized Si crystallites formed in amorphous Si (a-Si) matrix give rise to this luminescence. Very highS-parameters up to 0.62 were observed in the as-grown a-Si thin film suggesting positronium formation in the a-Si layer. The average lifetime of the positrons in the a-Si was determined to be about 520 ps. TheS-parameters dropped significantly to 0.53 by crystallization of the thin film at 800 °C for 10 seconds, which was almost the same to the value observed in bulk Si (100) substrate. Further crystallization from 60 seconds to 1 hour showed smaller change in theS-parameters than that from the a-Si to 10 seconds. The large change in theS-parameters due to the annealing might be caused by the formation of Si nanocrystallites in a-Si matrix suggesting that positron is a sensitive probe for structural investigations of the nc-Si materials.     

Oxygen‐sensing properties of 5,10,15,20‐tetraphenylporphinato platinum(II) and palladium(II) covalently bound on poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate)

A novel methacrylate monomer bearing 5,10,15,20‐tetraphenylporphyrinato palladium(II) (PdTPP) (monomer 1a ) was synthesized and copolymerized with isobutyl methacrylate (IBM) and 2,2,2‐trifluoroethyl methacrylate (TFEM) to give poly (IBM‐co‐TFEM) bearing PdTPP (copolymer 2a ) as a dye‐conjugated oxygen‐permeable polymer for pressure‐sensitive paint applications. The introduction of PdTPP into copolymer 2a was confirmed by UV–vis spectroscopy and extended X‐ray absorption fine structure analysis. The Stern–Volmer plots of the copolymer 2a and a mixture of PdTPP and poly(IBM‐co‐TFEM) both showed downward curvature, unlike that of the platinum complex analogue (copolymer 2b ) previously reported. The plots were successfully fitted with a two‐site model to give two distinct Stern–Volmer constants (K_SV1 and K_SV2) and the partition ratio f₁. Interestingly, the f₁ values for the copolymer 2a were almost constant at about 0.98, whereas those of the mixture of PdTPP and poly(IBM‐co‐TFEM) increased from 0.889 to 0.967 as the temperature was increased. This finding suggests that there are two distinct microheterogeneities, one temperature‐dependent and the other temperature‐independent, in the mixture of PdTPP and poly(IBM‐co‐TFEM). The dye‐conjugation approach effectively eliminates the temperature‐dependent, but not the temperature‐independent microheterogeneity. The luminescence decays of copolymers 2a and 2b and the corresponding mixtures in the absence of oxygen indicated that the temperature‐dependent microheterogeneity involves an oxygen diffusion process, whereas the temperature‐independent one appears to be inherent nature in PdTPP. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 663–670, 2010     

Palladium‐Catalyzed Direct C?H Arylation of Isoxazoles at the 5‐Position

A palladium‐catalyzed direct arylation of isoxazoles with aryl iodides has been achieved. The C H bond at the 5‐position is activated selectively to give coupling products in moderate to good yields. This direct arylation was applied to the synthesis of a spiro‐type chiral ligand, which proved to be most effective to the palladium‐catalyzed tandem cyclization of a dialkenyl alcohol.     

Nb2O5·nH2O as a heterogeneous catalyst with water-tolerant Lewis acid sites

Niobic acid, Nb(2)O(5)·nH(2)O, has been studied as a heterogeneous Lewis acid catalyst. NbO(4) tetrahedra, Lewis acid sites, on Nb(2)O(5)·nH(2)O surface immediately form NbO(4)-H(2)O adducts in the presence of water. However, a part of the adducts can still function as effective Lewis acid sites, catalyzing the allylation of benzaldehyde with tetraallyl tin and the conversion of glucose into 5-(hydroxymethyl)furfural in water.     

Dynamic behaviour attributed to chiral carbohydrate substituents of N-heterocyclic carbene ligands in square planar nickel complexes

Nickel complexes having acetylated glucopyranosyl group incorporated N-heterocyclic carbene (NHC) ligands with methyl or benzyl groups as an N-substituent exhibit two kinds of dynamic behaviours in solution (1)H NMR spectroscopy. One of the dynamic behaviours is attributed to the anti- and syn-rotamers, which occur by the rotation of the unsymmetrical NHC ligands around the axes of the Ni-C bonds. The other is attributed to the diastereomers of the syn-rotamers, which occur by opposite rotation of the imidazolylidene rings and the chiral carbohydrate group incorporated into the NHC ligands. Crystallographic analysis of the nickel complex having the NHC ligand with acetylated glucopyranosyl and benzyl groups as N-substituents showed CH-π interaction between the glucopyranosyl unit of each NHC ligand and the phenyl ring of the other NHC ligand in the complex in the solid state.     

Toward the racemic total synthesis of hederacines A and B: construction of an advanced tricyclic intermediate

Progress toward the total synthesis of hederacines A and B is described. Our approach involves an allylic cyanate-to-isocyanate rearrangement, eneyne ring-closing metathesis, and a transannular reaction between the C-5 amino group and the C-12 position of the perhydroazuleno[5,6-b]furanone intermediate.     

Fibrin glue increases the cell survival and the transduced gene product secretion of the ceiling culture-derived adipocytes transplanted in mice

The development of clinically applicable scaffolds is important for the application of cell transplantation in various human diseases. The aims of this study are to evaluate fibrin glue in a novel protein replacement therapy using proliferative adipocytes and to develop a mouse model system to monitor the delivery of the transgene product into the blood and the fate of the transduced cells after transplantation. Proliferative adipocytes from mouse adipose tissue were transduced by a retroviral vector harboring the human lecithin-cholesterol acyltransferase (lcat) gene, and were subcutaneously transplanted into mice combined with fibrin glue. The lcat gene transduction efficiency and the subsequent secretion of the product in mouse adipocytes were enhanced using a protamine concentration of 500 μg/ml. Adipogenesis induction did not significantly affect the lcat gene-transduced cell survival after transplantation. Immunohistochemistry showed the ectopic enzyme production to persist for 28 days in the subcutaneously transplanted gene- transduced adipocytes. The increased viability of transplanted cells with fibrin glue was accompanied with the decrease in apoptotic cell death. The immunodetectable serum LCAT levels in mice implanted with the fibrin glue were comparable with those observed in mice implanted with Matrigel, indicating that the transplanted lcat gene-transduced adipocytes survived and functioned in the transplanted spaces with fibrin glue as well as with Matrigel for 28 days. Thus, this in vivo system using fibrin is expected to serve as a good model to further improve the transplanted cell/scaffold conditions for the stable and durable cell-based replacement of defective proteins in patients with LCAT deficiency.     

Synthesis of poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate) with 5,10,15,20‐tetraphenylporphinato platinum(II) moiety as an oxygen‐sensing dye for pressure‐sensitive paint

Pressure‐sensitive paint (PSP), which consists of luminescent molecules embedded in an oxygen‐permeable polymer, has been developed for use in wind‐tunnel experiments. To improve the PSP technique, a novel luminescent methacrylate monomer, 5‐[4‐(2‐methacryloyloxyethoxycarbonyl)phenyl]‐10,15,20‐triphenylporphinato platinum(II), was synthesized and copolymerized with isobutyl methacrylate and 2,2,2‐trifluoroethyl methacrylate to produce a dye‐pendant copolymer ( 2 ). The introduction of 5,10,15,20‐tetraphenylporphinato platinum(II) (PtTPP) dye into 2 was confirmed by ultraviolet–visible spectroscopy and extended X‐ray absorption fine structure measurements. The extent of PtTPP dye incorporation in 2 was proportional to the molar fraction of the PtTPP‐pendant methacrylate monomer in the feed. The oxygen‐sensing property of 2 was compared with that of a PSP consisting of PtTPP dye embedded in poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate). Although the simple mixture of PtTPP and poly(isobutyl‐co‐2,2,2‐trifluoroethyl methacrylate) showed a marked deviation from a single Stern–Volmer relation, novel copolymer 2 gave a highly linear Stern–Volmer plot. This was unequivocal evidence of dye conjugation on the oxygen‐sensing polymer film. © 2005Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2997–3006, 2005