多级轴流压气机全工况特性计算

本文使用三维粘性流动计算软件Fine／Numeca,对某十五级轴流压气机进行了内流流场和全工况特性的数值计算尝试。分析了该压气机在设计工况和非设计工况的性能,同时把整机计算结果和前七级叶片的计算结果进行了比较。计算结果表明,当计算的级数较少时,目前的软件和硬件平台可以比较合理地预测压气机的全工况特性;而当计算的级数较多时,准确的数值模拟仍需要更为准确的多级模型和数值方法。     

Positive Steady States of a Prey-predator Model with Diffusion and Non-monotone Conversion Rate

In this paper, we study the positive steady states of a prey-predator model with diffusion throughout and a non-monotone conversion rate under the homogeneous Dirichlet boundary condition. We obtain some results of the existence and non-existence of positive steady states. The stability and uniqueness of positive steady states are also discussed.     

一类求解奇异延迟微分方程的两步连续Runge-Kutta方法的收敛性

本文给出了一类求解延迟落在当前积分步内延迟微分方程的两步连续Runge-Kutta方法。在一定条件下我们证明了方法收敛性,数值试验表明方法是有效的。     

从芒果皮中提取果胶的工艺研究

果胶是一种大分子多糖类物质 ,具有良好的胶凝作用 ,用途广泛 ,在国内外市场上的销量很好。 1 990年世界上果胶总产量约 2 5 0 0 0吨 ,而我国 1 990年仅在食品工业上消耗的果胶就达 1 0 0 0吨 ,但国内市场上销售的果胶大部分为进口货[1] 。果胶在我国的生产仍处于开发阶段 ,所以发掘新的提取资源、提高果胶质量、降低果胶生产成本的意义十分重大。目前 ,已有以柑桔皮、向日葵盘、苹果皮、香蕉皮、马铃薯渣为原料提取果胶的研究报道 ,如何从芒果皮中提取果胶却未见报道。芒果在制造罐头和饮料中副产大量下脚料———芒果皮 ,未能得到充分利用…     

Chiral Salen Manganese Complex Immobilized on SBA-15： A New Heterogenized Enantioselective Catalyst for the Epoxidation of Alkenes

Jacobsen‘s catalyst was immobilized onto SBA-15 by multi-step grafting, and this heterogenized catalyst exhibited comparable catalytic performance with the corresponding homogeneous counterpart for the epoxidation of alkenes, and the catalyst could be recycled effectively several times.     

SYNTHESIS AND CHARACTERIZATION OF ORGANOMONTMORILLONITE AND POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES

The montmorillonites (MMTs), layered, smectite-type silicates, were premodified by two different methods priorto the polymer melt intercalation. In one case MMTs were modified with cetyltrimethylammonium bromide (CTAB), andtermed as organomontmorillonites (OMMTs); in the other case MMTs were modified by nylon, and the products were calledmodified montmorillonites (MMMTs). The effects of CTAB and nylon on the MMTs were investigated by using TG andWAXD. The results show that interlayer spacings of CTAN and nylon modified MMTs are larger than that of sodium MMTs.Then, polyamide 66 (PA 66)/MMT nanocomposites were obtained through the method of melt intercalation of polymers. Thenanocomposites were characterized by WAXD, TEM and Molau experiments. The results indicate that the MMTs dispersehomogeneously in the PA 66 matrix. The mechanical properties of nanocomposites, such as tensile properties and flexuralproperties, were also measured and show a tendency to increase with increase of MMT content and reach the maximumvalues at 5phr MMT content. The heat distortion temperature (HDT) of the nanocomposites (7 phr) is about 32 K higher thanthat of pure PA 66.     

硅氧化合物化学蒸气沉积法精细调变沸石分子筛

本文报告了用化学蒸气沉积法精细调变沸石孔径的结果，着重考察了正硅酸乙酯和六甲基硅醚沉积条件的关系。间二甲苯和均三甲苯的吸附动力学实验表明，用Ｓｉ－（ＯＥｔ）４制得的ＳｉＨβ和ＳｉＨＺＳＭ－５上的吸附速率及吸附量明显下降，证实沸石的孔口得到了调变。正己烷的吸附等温线和异丙醇探针反应，沸石孔容和孔道内酸性未受孔口调变的影响。结果还表明Ｓｉ（ＯＥｔ）４未进入沸石孔道，而六甲基硅醚分子则进入Ｈβ沸石孔道，     

甲酰胺对有序介孔二氧化硅形貌的影响

At room temperature and in acidic solution, ordered mesoporous silicas with particular morphology were synthesized using cetylpyridinium chloride as the template and formamide as the cosolvent. Scanning electron microscope (SEM), small angle X-ray diffraction (SXRD), and nitrogen adsorption techniques were used to characterize the as-synthesized and calcined samples. Results showed that the samples had hexagonal mesostructure analogous to MCM-41 and relatively narrow pore-size distributions (BJH). Besides, BET surface areas of the samples were in the range of 1 000～1 250 m²·g^-1 and high total pore volumes were up to 1.367 cm³·g^-1. Addition of formamide affected obviously mesostructures and the morphology of the mesoporous silica. Furthermore, with the increase of the concentration of formamide, the unit-cell constant decreased and particle shape changed from gyroids to fibers.