Strength and elasticity of SiO2 across the stishovite-CaCl2-type structural phase boundary

Radial x-ray diffraction experiments were conducted under nonhydrostatic compression on SiO2 to 60 GPa in a diamond anvil cell. This ratio of differential stress to shear modulus t/G is 0.019(3)-0.037(5) at P=15-60 GPa. The ratio for octahedrally coordinated stishovite is lower by a factor of about 2 than observed in four-coordinated silicates. Using a theoretical model for the shear modulus, the differential stress of stishovite is found to be 4.5(1.5) GPa below 40 GPa and to decrease sharply as the stishovite-CaCl2-type phase transition boundary is approached. Inversion of measured lattice strains provides direct experimental evidence for softening of C11-C12.     

A fully automated 2-D LC-MS method utilizing online continuous pH and RP gradients for global proteome analysis

The conventional 2-D LC-MS/MS setup for global proteome analysis was based on online and offline salt gradients (step and continuous) using strong-cation-exchange chromatography in conjunction with RP chromatography and MS. The use of the online system with step salt elution had the possibility of resulting in peptide overlapping across fractions. The offline mode had the option to operate with continuous salt gradient to decrease peak overlap, but exhibited decreased robustness, lower reproducibility, and sample loss during the process. Due to the extensive washing requirement between the chromatography steps, online continuous gradient was not an option for salt elution. In this report, a fully automated, online, and continuous gradient (pH continuous online gradient, pCOG) 2-D LC-MS/MS system is introduced that provided excellent separation and identification power. The pH gradient-based elution provided more basic peptides than that of salt-based elution. Fraction overlap was significantly minimized by combining pH and continuous gradient elutions. This latter approach also increased sequence coverage and the concomitant confidence level in protein identification. The salt and pH elution-based 2-D LC-MS/MS approaches were compared by analyzing the mouse liver proteome.     

Nanoshell magnetic resonance imaging contrast agents

Nanocontrast agents have great potential in magnetic resonance (MR) molecular imaging applications for clinical diagnosis. We synthesized Au(3)Cu(1) (gold and copper) nanoshells that showed a promising MR contrast effect. For in vitro MR images, the large proton r1 relaxivities brightened T(1)-weighted images. As for the proton-dephasing effect in T(2), Au(3)Cu(1) lightened MR images at the low concentration of 0.125 mg mL(-1) (3.84 x 10(-7) mM), and then the signal continuously decreased as the concentration increased. For in vivo MR imaging, Au(3)Cu(1) nanocontrast agents enhanced the contrast of blood vessels and suggested their potential use in MR angiography as blood-pool agents. We propose that (1) the cooperativity originating from the form of the nanoparticles and (2) the large surface area coordinated to water from their porous hollow morphology are important for efficient relaxivity. In a cytotoxicity and animal survival assay, Au(3)Cu(1) nanocontrast agents showed a dose-dependent toxic effect: the viability rate of experimental mice reached 83% at a dose of 20 mg kg(-1) and as much as 100% at 2 mg kg(-1).     

Thermal degradation of MDI-based segmented polyurethanes

Thermal degradations of 4,4′-diphenylmethane diisocyanate-based thermoplastic polyurethane elastomers were conducted and investigated as functions of heating conditions by using thermogravimetric analysis, ultraviolet-visible (UV-vis) spectroscopy, gel permeation chromatography (GPC), and Fourier transform infrared (FTIR) spectroscopy. The extent of degradation increased with increasing temperatures and times. The degradation was accompanied by crosslinking and was more significant under air than under nitrogen, indicating that a free-radical mechanism was involved. The degradation mainly was due to unstable hard segments and gave a red shift in the UV-vis spectra. The degradation, leading to considerable discoloration, was demonstrated by UV-vis spectroscopy, starting from 240 °C in air for 10 min. Heated in nitrogen for the same period of time, the samples did not show considerable discoloration until 280 °C. The UV-vis data suggested that the degradation occurred through cleavages of N H bonds and C H bonds on the hard segments. Chain scission of polymer main chains, as demonstrated by GPC data, occurred at a temperature as low as 200 °C in nitrogen, although cleavage of N H bonds was not detectable by UV-vis and FTIR spectroscopy at these conditions. FTIR spectroscopy also provided evidence of cleavage of N H bonds and depolymerization of urethane linkages. Irganox 1010 was found to be an efficient antioxidant. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4126–4134, 1999     

Kinetics and mechanism of the cationic polymerization of trioxane. I. Crystallization during polymerization

Cationic polymerizations of trioxane in 1,2‐ethylene dichloride and benzene were heterogeneous and reversible. Phase separation accompanying with crystallization occurred during the polymerization. Three morphological changes were found in the course of the polymerization as were investigated by dilatometry and precipitation method. Based on the findings of morphological changes and three reversible processes for the polymerization, a rate equation was proposed to describe the polymerization. The proposed rate equation was fairly good in describing the experimental data, and kinetics constants including K_p, K_d, K_p′, K_d′, M, M, and K_dis/K_cr for the polymerization at 30, 40, and 50°C in 1,2‐ethylene dichloride and benzene were obtained. Factors that affected the kinetics constants were discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 483–492, 1999     

Cyclodextrin-micellar electrokinetic chromatography of apolipoproteins on human very low-density lipoprotein

The apolipoproteins (APOs) of human very low-density lipoprotein (VLDL) were investigated by an optimized cyclodextrin-micellar electrokinetic chromatography (CD-MEKC) method. The separation buffer consisted of 20 mM sodium phosphate, 40 mM bile salts (50% sodium cholate and 50% sodium deoxycholate), 25 mM carboxymethyl-β-cyclodextrin (CM-β-CD) (pH 7.0). For CD-MEKC separation, a sample injection time of 12 s, a separation voltage of 15 KV, and a capillary temperature of 15°C were chosen. The optimal CD-MEKC method showed good resolution and repeatability for VLDL APOs. Identification and quantitation of VLDL APOs CI, CIII, and E were based on comparison with human APO standards. Good linear relationships with correlation coefficient (R²) 0.99 were obtained for APOs CI, CIII, and E standards. For these three APOs, the linear ranges were within 0.01-0.54 mg/mL, and the concentration limits of detection (LODs) were lower than 0.02 mg/mL. Moreover, VLDL APOs from four uremic patients and four healthy subjects were compared. The uremic and healthy CD-MEKC profiles showed dramatic difference. The levels of APO CIII were significantly higher for two patients, and the level of APO E was significantly higher for one patient. This study might be helpful for following the disease development of uremia and cardiovascular disease (CVD) in the future.     

Pnictogen‐containing iron and chromium carbonyl complexes: From complexes to semiconducting frameworks

Recently, main group elements containing transition metal carbonyl complexes have received much attention due to their novel bonding modes and versatile reactivities. In this article, we will focus on the development of pnictogen (Bi, Sb, and As)‐containing Fe or Cr carbonyl complexes reported in our previous study, in which their rational synthetic methodologies, intriguing reactivities, as well as their special properties will be described and systematically compared. Importantly, a unique zig‐zag Bi‐Fe polymer was synthesized, and several Bi‐Cr complexes were found to exhibit surprising semiconducting behaviors with varied ultra‐low energy gaps via the through‐bond or through‐space electron communication.     

Iron oxide nanopropellers prepared by a low-temperature solution approach

The alpha-Fe(2)O(3) (hematite) nanopropellers were synthesized via a low-temperature solution-based method using FeCl(2) as a precursor in the presence of urea and glycine hydrochloride. The formation of alpha-Fe(2)O(3) nanopropellers is strongly depended on the addition of glycine hydrochloride, which serves as a pH modulator and affects the oxidation rate of Fe(2+). The structural evolution of the propeller-structured hematite was found to follow dissolution and recrystallization processes. For the structural conformation, each nanopropeller presents a hexagonal central column closed by six equivalent surfaces of {(-)1100} and the six arrays of the nanopropeller structure are a result of growth along +/- [(-)1100], +/- [(-)1010], and +/-[0(-)110]. Preliminary results show that the magnetic maghemite (gamma-Fe(2)O(3)) nanopropellers could also be prepared by a reduction and reoxidation process from the alpha-Fe(2)O(3) (hematite) nanopropeller precursors.