Interface structure and misfit relaxation in YBa2Cu3O7‐δ/PrBa2Cu3O7‐δ heterostructures on SrTiO3(001) substrates

Structural properties of YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterointerfaces have been investigated by aberration‐corrected electron microscopy. Experimental evidence shows that c‐axis‐oriented YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterostructures with atomically sharp interface epitaxially grow on SrTiO₃(001) substrates. In terms of the contrast analysis, no apparent interdiffusion between YBa₂Cu₃O_7‐δ and PrBa₂Cu₃O_7‐δ occurs at the interface. In addition, stand‐off misfit dislocations and planar faults appear within PrBa₂Cu₃O_7‐δ layer near the interface. Both misfit dislocations and interfacial dislocations resulting from the termination of planar faults contribute to misfit relaxation at the YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ interface. The defect configuration of planar faults and stand‐off misfit dislocations is explored. Copyright © 2013 John Wiley & Sons, Ltd.     

A new asymmetric Pseudo‐Voigt function for more efficient fitting of XPS lines

Asymmetric peak profiles for the application in spectroscopy can be obtained in a simple way by substituting the usually constant full width at half maximum parameter in Pseudo‐Voigt functions with an energy‐dependent expression, for instance of sigmoidal shape. While this approach has been successfully applied to vibrational spectra, we find that the resulting curves are less suitable for least‐squares fits of X‐ray photoelectron spectroscopy (XPS) data. However, if one additionally allows a variable displacement of the sigmoidal step relative to the peak, excellent fitting results can be obtained. We demonstrate the applicability of our extended approach on several inherently asymmetric XPS lines, i.e. the C 1s signal of graphite and C₂H₂/Pd(100), the 3d_5/2–3d_3/2 doublet of palladium, and the 4f_7/2–4f_5/2 doublet of platinum. Comparison of the corresponding fit results with the results obtained by the application of more elaborate, theory‐based line profiles (Doniach‐?unji? and Mahan functions) shows that the modified Pseudo‐Voigt function gives practically identical results in terms of peak shape and area, while requiring much less computational effort since no convolution procedures are required for its calculation. Thus, this function is most suitable for application in one of the following situations: (i) the peak shape of a given signal is known but cannot be calculated with ease, and (ii) the theoretical peak shape is not (yet) known, however, one wants to perform a first quantitative screening of the data at issue. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterization of size‐segregated aerosols using ToF‐SIMS imaging and depth profiling

Size‐segregated particles were collected with a ten‐stage micro‐orifice uniform deposit impactor from a busy walkway in a downtown area of Hong Kong. The surface chemical compositions of aerosol samples from each stage were analyzed using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) operated in the static mode. The ToF‐SIMS spectra of particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were compared, and the positive ion spectra from stage 2 to stage 10 were analyzed with principal component analysis (PCA). Both spectral analysis and PCA results show that the coarse‐mode particles were associated with inorganic ions, while the fine particles were associated with organic ions. PCA results further show that the particle surface compositions were size dependent. Particles from the same mode exhibited more similar surface features. Particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were further selected as representatives of the three modes, and the chemical compositions of these modes of particles were examined using ToF‐SIMS imaging and depth profiling. The results reveal a non‐uniform chemical distribution from the outer to the inner layer of the particles. The coarse‐mode particles were shown to contain inorganic salts beneath the organics surface. The accumulation‐mode particles contained sulfate, nitrate, ammonium salts, and silicate in the regions below a thick surface layer of organic species. The nucleation‐mode particles consisted mainly of soot particles with a surface coated with sulfate, hydrocarbons, and, possibly, fullerenic carbon. The study demonstrated the capability of ToF‐SIMS depth profiling and imaging in characterizing both the surface and the region beneath the surface of aerosol particles. It also revealed the complex heterogeneity of chemical composition in size and depth distributions of atmospheric particles. Copyright © 2014 John Wiley & Sons, Ltd.     

Topography and field effects in the inner side of microvia hole using ToF‐SIMS

We have developed a simple and powerful method, which is called ‘angled sample holder method’, to characterize a topographic structured sample such as microsized via hole of ball grid array using time‐of‐flight SIMS. The diameter of via holes was 100 µm and the depth was 70 µm. To remove the shaded area by incidence primary ion beam and to extract secondary ions from the bottom of a via hole, several types of angled sample holders with compensation steering plate were applied on the basis of simulation results using SIMION code. And the analyses using angled sample holder method enabled us to characterize the bottom and side wall of a via hole in clear. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of estrogens in environmental water samples using 1,3‐dipentylimidazolium hexafluorophosphate ionic liquid as extraction solvent in dispersive liquid–liquid microextraction

In this work, the potential of a symmetric dialkyl‐substituted ionic liquid (IL), 1,3‐dipenthylimidazolium hexafluorophosphate ([PPIm][PF₆]), as extraction solvent in dispersive liquid–liquid microextraction (DLLME) has been studied for the analysis of a group of three natural (estriol, 17β‐estradiol, and 17α‐estradiol) and four synthetic (17α‐ethynylestradiol, diethylstibestrol, dienestrol, and hexestrol) estrogenic compounds as well as one mycotoxin with estrogenic activity (zearalenone) in different types of water samples (Milli‐Q, mineral, and wastewater). Separation, determination, and quantification were developed by HPLC‐DAD and a fluorescence detector (FD) connected in series. Factors influencing the IL‐DLLME procedure (sample pH, amount of IL, type and volume of disperser solvent, ionic strength, and assistance of vortex agitation) were investigated and optimized by means of a step‐by‐step approach. Once the optimum extraction conditions were established (10 mL of water at pH 8, 60 mg of [PPIm][PF₆], 500 μL of ACN as disperser solvent and vortex agitation for 1 min), the calibration curves of the whole method (IL‐DLLME‐HPLC‐DAD/FD) were obtained and precision and accuracy were evaluated. It was demonstrated that the developed methodology was repeatable, accurate, and selective with limits of detection in the 0.30–0.57 μg/L and 13.8–37.1 μg/L range for FD and DAD, respectively. Relative recovery values were higher than 85% for the different types of water samples and the Student's t test demonstrated that there were not significant differences between the added and the found concentration.     

An updated version of the computational package SIMPRE that uses the standard conventions for Stevens crystal field parameters

The crystal field approach used by SIMPRE is analyzed, verifying the exactness of the results concerning energy levels and magnetic properties calculated by the package. To coincide with the prevailing conventions, we reformulate the presentation of the crystal field parameters, so that the results are now, also from a formal point of view, strictly correct. New calculations are presented to test the influence of neglecting the excited J states, a common but critical approximation employed by SIMPRE. For that, we examine the case of Er(trensal) complex (H₃trensal = 2,2′,2″‐tris(salicylideneimino)triethylamine) where the influence of this approximation is found to be minimal. A patched version of the code, SIMPRE 1.1, and an updated version of the user manual are now available. Finally, we comment on “Software package SIMPRE – revisited,” which apparently revisits a software package without inspecting or using the code. © 2014 Wiley Periodicals, Inc.     

Kinetics of radical‐molecule reactions in aqueous solution: A benchmark study of the performance of density functional methods

The performance of 18 density functional approximations has been tested for a very challenging task, the calculations of rate constants for radical‐molecule reactions in aqueous solution. Despite of the many difficulties involved in such an enterprise, six of them provide high quality results, and are recommended to that purpose. They are LC‐ωPBE, M06‐2X, BMK, B2PLYP, M05‐2X, and MN12SX, in that order. This trend was obtained using experimental data as reference. The other relevant aspects used in this benchmark are: (i) the SMD model for mimicking the solvent; (ii) the conventional transition state, the zero‐curvature tunneling correction, and the limit imposed by diffusion for the calculation of the rate constants. Even though changing any of these aspects might alter the trend in performance, at least, when using them, the aforementioned functionals can be successfully used to obtain high quality kinetic data for the kind of reactions investigated in this work. © 2014 Wiley Periodicals, Inc.     

Study of Interactions and Association Thermodynamics Between Sudan Red and Sodium Dodecyl Sulfate in Microemulsions

The absorption spectrum of Sudan red III (SR) in oil solutions and a series of O/W microemulsion with surfactant sodium dodecyl sulfate (SDS) has been determined by the UV-Vis spectrophotometer. We found that an association interaction existed between the stain SR and anionic surfactant SDS in water/mixed oil/SDS microemulsions. By measuring the absorbance of Sudan red in a series of microemulsions which has different R values and using the appropriate association models to analyze the experimental data, we obtain the association constants of SR and SDS, and the values of thermodynamics functions of associationΔ_r G _m has also been calculated from the association constants.     

Simultaneous determination of nine lignans from Schisandra chinensis extract using ultra‐performance liquid chromatography with tandem mass spectrometry in rat plasma,urine, and gastrointestinal tract samples: Application to the pharmacokinetic study of Schisandra chinensis

The fruit of Schisandra chinensis is a well‐known herbal medicine and dietary supplement due to a variety of biological activities including antihepatotoxic and antihyperlipidemic activities. However, the simultaneous validation methodology and pharmacokinetic investigation of nine lignans of S. chinensis extract in biological samples have not been proved yet. Thus, the present study was undertaken to develop the proper sample preparation method and simultaneous analytical method of schisandrol A, gomisin J, schisandrol B, tigloylgomisin H, angeloylgomisin H, schisandrin A, schisandrin B, gomisin N, and schisandrin C in the hexane‐soluble extract of S. chinensis to apply for the pharmacokinetic study in rats. All intra‐ and interprecisions of nine lignans were below 13.7% and accuracies were 85.1–115% and it is enough to evaluate the pharmacokinetic parameters after both intravenous and oral administration of hexane‐soluble extract of S. chinensis to rats.