An 18 Multi-InDels panel for analysis of highly degraded forensic biological samples

DNA genotyping from trace and highly degraded biological samples is one of the most significant challenges of forensic DNA identification. There is a lack of simple and effective methods for genotyping highly degraded samples. In this study, a multiple loci insertion/deletion polymorphisms (Multi-InDels) panel was designed for detecting 18 autosomal Multi-InDels through capillary electrophoresis (CE) with amplicon sizes no longer than 125 bp. Studies of sensitivity, degradation, and species specificity were performed and a population study was carried out using 192 samples from Han populations in Hunan province in the south of China. The combined random match probability (CMP) of these 18 Multi-InDels was 3.23 × 10^–12 and the cumulative probability of exclusion (CPE) was 0.9989, suggesting this panel could be used independently for human identification and could provide efficient supporting information for parentage testing. Complete profiles were obtained from as low as 62.5 pg of total input DNA after increasing the number of PCR cycles. Moreover, all alleles were detected from artificially highly degraded DNA after 80 min of boiling water bath treatment. This 18 Multi-InDels panel is simple, fast, and effective for the forensic analysis of highly degraded DNA.     

基于EPL的分布式时钟同步方法

工业以太网协议Ethernet POWERLINK(EPL)分布式站点的时钟同步方法并不能在实时运行过程中保持很高的同步精度,无法满足特定环境下的控制要求。研究了工业以太网协议EPL的两种时钟同步机制,通过数理计算分析了时钟同步误差产生的原因,针对误差较大的缺点,提出了减小误差的方法。通过迭代计算消除了主从站同步报文往返的路径延迟,并设计基于现场可编程门阵列(FPGA)的集线器(Hub)用于EPL菊花链网络拓扑结构,有效地克服了时钟同步报文往返传输延时不一致的缺点,测试结果表明新方法明显优于协议自身的时钟同步方法,对于实现基于EPL的高精度分布式时钟同步网络具有重要意义。     

Wide-band circular polarization-keeping reflection mediated by metasurface

In this paper,we show that circular polarization-keeping reflection can be achieved using reflective metasurfaces.The underlying physical mechanism of the polarization-keeping reflection is analyzed using a reflection matrix.A wideband circular polarization-keeping reflector is demonstrated using N-shaped resonators.Both the simulation and experiment results show that the polarization-keeping reflection can be achieved with a high efficiency larger than 98%over the frequency range from 9.2 GHz to 17.7 GHz for both incident left-and right-handed circularly polarized waves.Under oblique incidence,the bandwidth increases as the incident angle varies from 0°to 80°. Moreover,the co-polarization reflection is independent of the incident azimuth angles.     

Frequency-locking and threshold current-lowering effects of a quantum cascade laser and an application in gas detection field

In this paper,the frequency-locking and threshold current-lowering effects of a quantum cascade laser are studied and achieved.Combined with cavity-enhanced absorption spectroscopy,the noninvasive detection of H_2 with a prepared concentration of 500 ppm in multiple dissolved gases is performed and evaluated.The high frequency selectivity of 0.0051 cm~(-1) at an acquisition time of 1 s allows the sensitive detection of the(1-0) S(l) band of H_2 with a high accuracy of(96.53±0.29)%and shows that the detection limit to an absorption line of 4712.9046 cm~(-1) is approximately(17.26±0.63) ppm at an atmospheric pressure and a temperature of 20 ℃.     

CO2/H2S corrosion behavior of tubular steel SM 80SS in Cl−-containing solution in the absence or presence of Ca2+ and Mg2+

CO₂/H₂S corrosion behavior of tubular steel SM 80SS have been investigated utilizing electrochemical measurement technology, weight loss test, scanning electron microscope (SEM) and X-ray diffraction (XRD). The results showed that temperature increased the corrosion rate and changed the corrosion mechanism of tubular steel SM 80SS. Cl^? quickened the anodic dissolution and increased the corrosion rate of tubular steel SM 80SS. Furthermore, the addition of Ca²⁺ and Mg²⁺ resulted in the corrosion products changing from crystalline FeCO₃ to amorphous Fe(Ca,Mg)(CO₃)₂ and serious corrosion under scale of tubular steel SM 80SS.     

Using cone calorimeter to study thermal degradation of flexible PVC filled with zinc ferrite and Mg(OH)2

Flame-retarded poly(vinyl chloride) (PVC) materials have been prepared by using zinc ferrite (ZnFe₂O₄ (ZFO)) combined with magnesium hydroxide (Mg(OH)₂ (MH)). The effects of these additives on the combustion and thermal degradation of PVC samples were studied using the limiting oxygen index test, the smoke density rating test, thermogravimetric–differential thermogravimetry, and the cone calorimeter test. The results showed that ZFO and MH were good synergists for improving the flame retardancy and smoke-suppressing of PVC/MH/ZFO blends. ZFO can significantly improve the maximum mass loss velocity in the first stage, and reduce the initial decomposition temperature and the decomposition range in the PVC/MH/ZFO blends. The char yield at 700 °C of flame-retarded PVC clearly decreased below theoretical values due to the cationic cracking reactions in the presence of ZFO. Furthermore, the PVC/10MH/10ZFO showed strong flame-retarding synergism since the decreased average heat release rate value. And the PVC/19MH/1ZFO presented a significant smoke-suppressing effect by the least average specific extinction area, peak smoke production rate, and total smoke produce. Moreover, the CO and CO₂ production was increased because of a large amount of fragment of char residue in contact air in the presence of ZFO.     

Clickable Periodic Mesoporous Organosilicas: Synthesis,Click Reactions,and Adsorption of Antibiotics

Pharmaceutical antibiotics are not easily removed from water by conventional water‐treatment technologies and have been recognized as new emerging pollutants. Herein, we report the synthesis of clickable azido periodic mesoporous organosilicas (PMOs) and their use as adsorbents for the adsorption of antibiotics. Ethane‐bridged PMOs, functionalized with azido groups at different densities, were synthesized by the co‐condensation of 1,2‐bis(trimethoxysilyl)ethane (BTME) and 3‐azidopropyltrimethoxysilane (AzPTMS), in the presence of nonionic‐surfactant triblock‐copolymer P123, in an acidic medium. Four different alkynes were conjugated to azide‐terminated PMOs by means of an efficient click reaction. The clicked PMOs showed improved adsorption capacity (241 μg g^?1) for antibiotics (ciprofloxacin hydrochloride) compared with azido‐functionalized PMOs because of the enhanced π–π stacking interactions. These results indicate that click reactions can introduce multifunctional groups onto PMOs, thus demonstrating the great potential of PMOs for environmental applications.     

石墨烯/聚吡咯复合材料与电化学应用研究进展

石墨烯由于其特殊的单原子层结构决定了其具有丰富而新奇的物理化学性质.在发现后的短短十年间,已在物理学、化学、材料科学与工程等领域产生了重要的影响,成为备受瞩目的国际研究前沿和热点.在石墨烯的研究和应用中,最重要的问题就是如何实现其可控制备,组装及功能化应用.近年来,包括本课题组在内的国内外很多研究人员一直在积极探索石墨烯及其功能复合物的制备及应用新途径,其中石墨烯与导电高分子聚吡咯(PPy)的复合是研究的重要内容之一,并且取得了一系列有价值的研究成果.本文对石墨烯/PPy复合结构的可控制备进行了系统的归纳与总结,也讨论了其在催化、驱动器、超级电容器和传感器等电化学应用领域的最新进展,并对相关领域的发展趋势做了展望.     

A pyridoxal-based chemosensor for visual detection of copper ion and its application in bioimaging

A pyridoxal-based chemosensor was synthesized by reacting hydrazine hydrate and pyridoxal hydrochloride in ethanol and characterized by NMR and ESI-MS.The optical properties of the compound were investigated in a methanol:HEPES solution.The compound displayed selectivity for Cu2+,as evidenced by a colorless to yellow color change,which was characterized using UV–vis spectroscopy.The fluorescence of the compound can be quenched only by Cu2+,accompanying by a color change from blue to colorless.Furthermore,it can be used in bioimaging.     

Efficient oxidation of ethylbenzene catalyzed by cobalt zeolitic imidazolate framework ZIF-67 and NHPI

Efficient catalytic oxidation of ethylbenzene to acetophenone was realized using the catalytic system of cobalt zeolitic imidazolate framework ZIF-67/N-hydroxyphthalimide （NHPI） under mild conditions. 95.2% conversion of ethylbenzene with 90.3% selectivity to acetophenone could be obtained at 373 K under 0.3 MPa 02 for 9 h. The results show that there exists synergetic effect between ZIF-67 and NHPI. 1-Phenylethyl hydroperoxide （PEHP） was generated via a radical process involving the hydrogen abstraction from ethylbenzene by phthalimide N-oxyl, and subsequently effectively decomposed to acetophenone by ZIF-67.