NMR and Excess Volumes Studies in DMF–Alcohol Mixtures

Chemical shifts of the alcohol and DMF protons in DMF–alcohol mixtures with the mole fraction of alcohol are reported in order to study the hydrogen bond interaction present in the mixtures. The densities of DMF–methanol mixture at 22°C are also measured. Excess volumes and excess chemical shifts are correlated by the Redlich–Kister equation. The relation between excess volumes and excess chemical shifts in the mixtures is discussed. It is found that the maximum excess chemical shifts ^E(CHO-OH) and ^E(CH₃-OH) are positioned at about mole fraction methanol = 0.57 for the DMF–methanol system, as is V ^E. The results show that the NMR spectral method offers a valuable approach to similar future studies of interactions in mixtures.     

加速剂对化学镀镍层组成与结构的影响

加速剂对化学镀镍层组成与结构的影响方景礼，武勇，韩克平，张敏（南京大学应用化学研究所配位化学国家重点实验室南京２１００９３）关键词化学镀镍，Ｎｉ０Ｐ合金，加速剂，硫脲化学镀镍磷合金具有耐蚀性、可焊性、厚度均匀和硬度高等优点，已得到广泛应用。为提高生产...     

Les phenomenes de relaxation non isotherme dans les copolymeres ethylene-acetate de vinyle—II. Thermoluminescence

Thermoluminescence glow curves displayed by ethylene-vinyl acetate copolymers after u.v. irradiation at low temperature have been compared to the depolarization thermocurrents (DTC) described in a previous publication, in order to establish a possible correlation between the thermal liberation of the trapped carriers and the intrinsic relaxation phenomena. The detailed analysis of these glow curves has been carried out, either by studying their spectral distributions between 300 and 650 nm, or by the systematic application of the classical method of partial glow and by a method of partial irradiation which consists in irradiating the sample isothermally at different temperatures in several experiments. Two main glow peaks corresponding to distinct spectral emission zones were found. These peaks occur in temperature zones similar to those of appearance of the DTC peaks; the latter were assigned to primary and secondary dipolar relaxations, i.e. α and β type relaxations, respectively. In addition, the β glow peak presents properties comparable with those of the DTC β peak and hence results probably from thermal untrapping, this untrapping being at least partly assisted by short range chain motions in the polymer. The α glow peak, on the other hand, shows little correspondence with the DTC peak and has essentially a superficial origin; it probably arises from two distinct traps associated with impurities or with interface between amorphous and crystalline regions rather than from the polymeric chains themselves.     

Homolysis of weak Ti-O bonds: experimental and theoretical studies of titanium oxygen bonds derived from stable nitroxyl radicals

Titanium-oxygen bonds derived from stable nitroxyl radicals are remarkably weak and can be homolyzed at 60 degrees C. The strength of these bonds depends sensitively on the ancillary ligation at titanium. Direct measurements of the rate of Ti-O bond homolysis in Ti-TEMPO complexes Cp2TiCl(TEMPO) (3) and Cp2TiCl(4-MeO-TEMPO) (4) (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl, 4-MeO-TEMPO = 2,2,6,6-tetramethyl-4-methoxypiperidine-N-oxyl) were conducted by nitroxyl radical exchange experiments. Eyring plots gave the activation parameters, deltaH++ = 27(+/- 1) kcal/mol, deltaS++ = 6.9(+/- 2.3) eu for 3 and deltaH++ = 28(+/- 1) kcal/mol, deltaS++ = 9.0(+/- 3.0) eu for 4, consistent with a process involving the homolysis of a weak Ti-O bond to generate the transient Cp2Ti(III)Cl and the nitroxyl radical. Thermolysis of the titanocene TEMPO complexes in the presence of epoxides leads to the Cp2Ti(III)Cl-mediated ring-opening of the epoxide followed by trapping by the nitroxyl radical. The X-ray crystal structure of the Ti-TEMPO derivative, Cp2TiCl(4-MeO-TEMPO) (4), is reported. DFT (B3LYP/6-31G*) calculations and experimental studies reveal that the strength of the Ti-O bond decreases dramatically with the number of cyclopentadienyl groups on titanium. The calculated Ti-O bond strength of the monocyclopentadienyl complex 2 is 43 kcal/mol, whereas that of the biscyclopentadienyl complex 3 is 17 kcal/mol, a difference of 26 kcal/mol. These studies reveal that the strength of these Ti-O bonds can be tuned over an interesting and experimentally accessible temperature range by appropriate ligation on titanium.     

置换法测定气液平衡

本文工作在流通法的原理上提出一种不分析组成测定汽液平衡的新方法。它通过配置样品与汽液平衡测定仪汽相浓度区或液相浓度区的等体积置换,测定配样组成所对应的露点或泡点。置换法的基本原理双循环汽液平衡测定仪在达到操作稳态时,存在着三个浓度区间的划分以及相互之间的物料平衡关系。流通法的基本作法是,将平衡液相回流或平衡汽相回流引出,并以等流量的配制样品注入混合区。溶质量随时间的变化规律为,     

Swelling kinetics and release characteristic of crosslinked chitosan: Polyether polymer network (semi-IPN) hydrogels

The aqueous swelling kinetics of a series of crosslinked chitosan (cr-CS) with glutaraldehyde (GA) interpenetrating polyether hydrogels have been studied as functions of pH, the N-deacetylation degree of chitosan, the amount of crosslinking agent, the electrolyte composition in solution, temperature, and gel composition. Based on these results, the swelling mechanism of the hydrogels was discussed. The release profiles of chlorhexidini acetas from the semi-IPN were also investigated. © 1994 John Wiley & Sons, Inc.     

丙酮在XeCl准分子激光辐射下的多光子电离和碎裂研究

我们用扩散分子束多光子电离光谱技术研究了丙酮在XeCl准分子激光辐射下的多光子电离和碎裂行为。实验表明丙酮没有产生母体离子峰(m/e=58), 只给出m/e=43和15两个峰, 分别对应于丙酮光解所产生的两个碎片CH_3 CO和CH_3。其离子信号(1)分别与激光强度(Ⅰ)的3和3.6次方成正比。分析表明离子是由中性碎片电离产生的。     

Photodegradation of a 1,3,4-thiadiazole-urea herbicide. Isolation,characterization, X-ray crystal structure and synthesis of photoproducts

The photodegradation of 1,3-dimethyl-1-(2-(3-fluorobenzylthio)-1,3,4-thiadiazol-5-yl)urea as a thin film and in solution is described. The two photoproducts from thin-film photolysis were characterized by spectral and synthetic methods. The X-ray crystal structure of one of the photoproducts is also reported. The rearrangements were shown to involve an S-to-N benzyl migration, followed by a sulfur-oxygen substitution.     

Synthesis of 1,2,3,4,8,9,10,11-octahydro-[1,4] diazepino[6,5,4-jk ]earbazole and related compounds

1,2,3,4,8,9,10,11-Octahydro[1,4]diazepino[6,5,4-jk]earbazole (VIa) was synthesized from 2,3,4,5-tetrahydro-1H-benzodiazepine (la) via the route shown in Scheme 1. Other compounds which were prepared similarly are 3-acetyl-6-chloro-1,2,3,4,8,9,10,11-octahydro[1,4]diazepino-[6,5,4-jk]carbazole(Vb) and 3-methyl-1,2,3,4,8,9,10,11-octahydro[1,4]diazepino[6,5,4-jk]carb-azole (VIII). Chemical transformations which were carried out with VI and 3-acetyl-1,2,3,4,8,9, 10,11-octahydro[1,4]diazepino[6,5,4-jk]carbazole (Va) are also described.     

Ordered porous films based on fluorinated polyimide derived from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 3,3′-dimethyl-4,4′-diaminodiphenylmethane

One of fluorinated polyimides was synthesized from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′-dimethyl-4,4′-diaminodiphenylmethane (DMMDA) by two-steps method, which had good solubility and hydrophilicity. 6FDA-DMMDA polyimide was dissolved in chloroform (CHCl₃) and cast on a glass substrate in a humid atmosphere. It was found that 6FDA-DMMDA/CHCl₃ solution was easy to form ordered porous structure at high concentration, and the reason was discussed in detail. In addition, the influences of solution concentration, the atmosphere humidity, were also tested.