Experimental study on the smoke temperature evolution in a polyethylene (PE)-lined compartment on fire

Smoke temperature evolution in the upper layer of compartment fire, which is critical for the prediction of potential flashover, was experimentally investigated in a real building. Three-millimeter polyethylene (PE) slabs attached on the internal walls were employed as the lining material to address the effect of the melting and combustion of the lining material on the smoke temperature. A corner gasoline pool fire was utilized as the fire source. Two thermocouple trees, mounted vertically at the center and the open door, and a high-definition camera were utilized to record the smoke temperature history and experimental video. Meanwhile, some furniture was loaded to study its enhancement feature on fire intensity. Heat release rates (HRRs) at different stages were analyzed based on MQH method (McCaffrey, Quintiere and Harkleroad) and pool fire theory. Smoke temperature was estimated through an improved MQH correlation considering the melting of the PE slabs and an empirical model, BFD curve (Barnett in Fire Saf J 37: 437–463, 2002) combined. The results show that both the maximum HRR and smoke temperature, 925.91 kW and 491.7 °C, are lower than the critical values of flashover. The PE lining greatly intensifies the fire power and the resulting smoke temperature compared with the ones in noncombustible wall scenario. Combustion of the molten PE flowing down from the walls would lead to a secondary peak in smoke temperature curve, which is rarely considered in previous work.

     

Combustion behavior and thermal stability of TPU composites based on layered yttrium hydroxides and graphene oxide

Journal of Thermal Analysis and Calorimetry - Layered yttrium hydroxides (LYH)- and graphene oxide (GO)-supported layered yttrium hydroxides (GO–LYH) were synthesized by a co-precipitation...     

Extending the Sensitivity of CEST NMR Spectroscopy to Micro‐to‐Millisecond Dynamics in Nucleic Acids Using High‐Power Radio‐Frequency Fields

Biomolecules undergo motions on the micro‐to‐millisecond timescale to adopt low‐populated transient states that play important roles in folding, recognition, and catalysis. NMR techniques, such as Carr–Purcell–Meiboom–Gill (CPMG), chemical exchange saturation transfer (CEST), and R_1ρ are the most commonly used methods for characterizing such transitions at atomic resolution under solution conditions. CPMG and CEST are most effective at characterizing motions on the millisecond timescale. While some implementations of the R_1ρ experiment are more broadly sensitive to motions on the micro‐to‐millisecond timescale, they entail the use of selective irradiation schemes and inefficient 1D data acquisition methods. Herein, we show that high‐power radio‐frequency fields can be used in CEST experiments to extend the sensitivity to faster motions on the micro‐to‐millisecond timescale. Given the ease of implementing high‐power fields in CEST, this should make it easier to characterize micro‐to‐millisecond dynamics in biomolecules.     

Designing a 0D/2D S‐Scheme Heterojunction over Polymeric Carbon Nitride for Visible‐Light Photocatalytic Inactivation of Bacteria

Constructing heterojunctions between two semiconductors with matched band structure is an effective strategy to acquire high‐efficiency photocatalysts. The S‐scheme heterojunction system has shown great potential in facilitating separation and transfer of photogenerated carriers, as well as acquiring strong photoredox ability. Herein, a 0D/2D S‐Scheme heterojunction material involving CeO₂ quantum dots and polymeric carbon nitride (CeO₂/PCN) is designed and constructed by in situ wet chemistry with subsequent heat treatment. This S‐scheme heterojunction material shows high‐efficiency photocatalytic sterilization rate (88.1 %) towards Staphylococcus aureus (S. aureus) under visible‐light irradiation (λ≥420 nm), which is 2.7 and 8.2 times that of pure CeO₂ (32.2 %) and PCN (10.7 %), respectively. Strong evidence of S‐scheme charge transfer path is verified by theoretical calculations, in situ irradiated X‐ray photoelectron spectroscopy, and electron paramagnetic resonance.     

Solvent‐Free Self‐Assembly for Scalable Preparation of Highly Crystalline Mesoporous Metal Oxides

Mesoporous metal oxides (MMOs) have been demonstrated great potential in various applications. Up to now, the direct synthesis of MMOs is still limited to the solvent induced inorganic‐organic self‐assembly process. Here, we develop a facile, general, and high throughput solvent‐free self‐assembly strategy to synthesize a series of MMOs including single‐component MMOs and multi‐component MMOs (e.g., doped MMOs, composite MMOs, and polymetallic oxide) with high crystallinity and remarkable porous properties by grinding and heating raw materials. Compared with the traditional solution self‐assembly process, the avoidance of solvents in this method not only greatly increases the yield of target products and synthesis efficiency, but also reduces the environmental pollution and the consumption of cost and energy. We believe the presented approach will pave a new avenue for scalable production of advanced mesoporous materials for various applications.     

Stereoselective Palladium‐Catalyzed C−F Bond Alkynylation of Tetrasubstituted gem‐Difluoroalkenes

A stereoselective Pd(PPh₃)₄‐catalyzed C?F bond alkynylation of tetrasubstituted gem‐difluoroalkenes with terminal alkynes has been developed. This method gives access to a great variety of conjugated monofluoroenynes bearing a tetrasubstituted alkene moiety with well‐defined stereochemistry. Chelation‐assisted oxidative addition of Pd to the C?F bond is proposed to account for the high level of stereocontrol. An X‐ray crystal structure of a key monofluorovinyl Pd^II intermediate has been obtained for the first time as evidence for the proposed mechanism.     

Visible-NIR Photodetectors Based on Low-Dimensional GeSe Micro-Crystals: Designed Morphology and Improved Photoresponsivity

GeSe micro-sheets and micro-belts have been synthesized by a facile one-pot wet chemical method in 1-octadecene solvent and oleic acid solvent, respectively. The adsorption of more oleic acid molecules on the (002) plane promoted growth along [010] direction of the GeSe micro-belts and limited carrier transport in this direction, resulting in higher carrier concentration and mobility of the GeSe micro-belts. The performance of the photodetectors based on the single GeSe micro-sheet and the single GeSe micro-belt was investigated under illumination at 532 nm, 980 nm and 1319 nm. Both, photodetectors based on a single GeSe micro-sheet and a single GeSe micro-belt, exhibit a high photoresponse, short response/recovery times, and long-term durability. Moreover, the photodetector based on a single GeSe micro-belt displays a broadband response with a high responsivity (5562 A/W at 532 nm, 1546 A/W at 980 nm) and detectivity (3.01×10¹² Jones at 532 nm, 8.38×10¹¹ Jones at 980 nm). These excellent characteristics render single GeSe micro-belts very interesting for use as highly efficient photodetectors, especially in the NIR region.     

Total Syntheses of Norrisolide‐Type Spongian Diterpenes Cheloviolene C,Seconorrisolide B,and Seconorrisolide C

The first total syntheses of three unusual norrisolide‐type rearranged spongian diterpenes, cheloviolene C, seconorrisolide B, and seconorrisolide C, have been accomplished via a common intermediate through late‐stage ring‐scissoring. The synthesis features a Wolff ring contraction for the synthesis of the trans‐hydrindane system, and a crucial retro Diels–Alder reaction/intramolecular ene cyclization for the rapid stereoselective construction of the furo[2,3‐b]furan system, which is commonly seen in rearranged spongian diterpenes.     

Precisely Tuning Photothermal and Photodynamic Effects of Polymeric Nanoparticles by Controlled Copolymerization

Cancer possesses normoxic and hypoxia microenvironments with different levels of oxygen, needing different efficacies of photothermal and photodynamic therapies. It is important to precisely tune the photothermal and photodynamic effects of phototherapy nano‐agents for efficient cancer treatment. Now, a series of copolymeric nanoparticles (PPy‐Te NPs) were synthesized in situ by controlled oxidative copolymerization with different ratios of pyrrole to tellurophene by FeCl₃. The photothermal and photodynamic effects of semiconducting nano‐agents under the first near‐infrared (NIR) irradiation were precisely and systematically tuned upon simply varying the molar ratio of the pyrrole to tellurophene. The PPy‐Te NPs were used for cancer treatment in mice, exhibiting excellent biocompatibility and therapeutic effect. This work presents a simple method to tune photothermal and photodynamic therapies effect in semiconducting nano‐agents for cancer treatment.