The preparation and adsorption properties of electrospun aramid nanofibers

The focus of this work is the preparation of aramid nanofibers via electrospinning technology and the study of their adsorption properties. In this article, aramid nanofibers were prepared by electrospinning aramid fibers solution with the addition of lithium chloride (LiCl). It showed a good adsorption capacity when methylene blue (MB) was used as the model target. There were much larger adsorption amounts and faster kinetics of uptaking target species of electrospun aramid nanofibers to MB than that of electrospun polyethersulfone (PES) nanofibers. Compared with activated carbon, aramid nanofibers also have a much faster adsorption rate to MB. Aramid nanofibers were subsequently used to effectively remove endocrine disruptors such as bisphenol A (BPA), phenol (Phe), and p‐hydroquinone (BPhe) from their aqueous solutions. Additionally, molecule imprinted technology enhances aramid nanofibers with much higher adsorption amounts and special adsorption property for endocrine disruptors. These results showed that aramid nanofibers have the potential to be used in environmental applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Novel ether-functional spiro-tetronic acid derivatives: molecule design, convenient synthesis and biological evaluation

A novel series of ether functionalization of spiro-tetronic acid derivatives have been designed and conveniently synthesized via three steps, including esterification, one-pot heterocyclization, and etherification reactions. The target molecules have been identified on the basis of analytical spectra data. All newly synthesized compounds have been screened for their potential insecticidal activity against Heliothis armigera and Plutella xylostella compared with spirodiclofen by standard method.     

From cluster assembly to ultrathin nanocrystals and complex nanostructures

Ultrathin nanostructures have attracted much attention in recent years due to their predictable novel properties and various potential applications. The improvement in synthetic skills has led to many successful syntheses of nanostructures including zerodimensional (0D) nanoclusters, one-dimensional (1D) nanowires, two-dimensional (2D) nanosheets and other higher-level complex nanostructures, where cluster-assembly of primary nanocrystals is a common process. In this review, progress in ultrathin nanocrystals in the last decade and several important factors in the growth mechanisms are covered. By giving examples of cluster assembly from 1D to 3D nanostructures, the utility of cluster assembly in the synthesis of new materials has been demonstrated.     

Z=18—82原子的同步辐射内壳层光电离积分截面的计算和讨论

此文计算了Ｚ＝１８－８２的原子在北京同步辐射４Ｂ９Ａ束线的白色Ｘ光照射下的光电离积分截面Ｇ值。结果表明，有三个Ｇ值较大的区域，Ｚ＝１８－２０，３９－４７和５９－８２，最大值分别为３．８×１０－６，１．６×１０－５和３．５×１０－５ｐｈｏｔｏｎｓ·ｃｍ２／ｓ。同时，估计了平衡时主要多重电荷态离子数目，分析了用同步辐射和离子阱进行多重电荷态实验的新的候选原子，讨论了有关实验方法和技术。     

水溶液中新型氨羧螯合剂对Eu3+、Tb3+离子的敏化发光性能研究

研究了四种新型氨羧螯合剂在水溶液中自身的荧光及对Eu3+、Tb3+离子的敏化发光性能.考察了浓度、pH值对荧光强度的影响.     

UHF机械调谐器调谐电容片形的程序设计

采用传输线理论可以计算机械式UHF调谐器对应不同频率点的调谐电容量。在进行满足直线频率关系的调谐电容片形设计时,应当求出调谐电容量C_Τ与旋转角θ的显式函数关系。但对于分布参数的电路,这有一定的困难。本文采用数值计算方法完成了具有良好直线频率跟踪特性的调谐电容片形的设计,并由计算机自动绘出了片形。     

30GHz RF脉冲压缩器设计

 为得到脉宽150ns，功率超过100MW的30GHz微波脉冲，采用MSLED-II原理设计了30GHz RF-脉冲压缩器。H-Hybrid，TE₁₀0^口-TE₁₀^o模式转换器等器件都采用了新型设计，所有微波器件的设计充分考虑了高功率下的适用性，没有容易引起打火的调谐杆、容性膜片等部件。在微波器件的设计中用HFSS软件进行了详尽的模拟。加工并测试了H-Hybrid，且用在CERN的RF脉冲展宽器上。     

有机层界面对双层有机发光二极管复合效率的影响

建立了双层有机发光二极管中载流子在有机层界面复合的无序跳跃理论模型.由于有机分子材料的空间及能带结构的无序性，采用刚体模型处理有机层界面问题是不恰当的，而采用无序跳跃模型比较合理.复合效率及复合电流由载流子跳跃距离、有机层界面的有效势垒高度及该界面处的电场强度分布所决定：在双层器件ITO/α-NPD/Alq₃/Al中，当所加电压小于19.5V时，复合效率随着载流子跳跃距离的增加而增加，而大于19.5V时，复合效率随着其距离的增加而减少；复合效率随着有机层界面有效势垒高度的增加而增加； 关键词： 有机层界面 双层有机发光二极管 复合效率 有效势垒高度 无序跳跃模型     

远距离三原子量子纠缠特性与其应用

三原子分别被束缚在用光纤环形连接单侧泄漏微光学腔场中,在微腔中输入激光驱动场和施加局域激光场,利用输入-输出技术及绝热近似理论,推导出一维Ising链模型的有效哈密顿量,该哈密顿量表明该系统会诱导出三原子中的任意两原子纠缠及三原子纠缠,用伴随数(concurrence)度量两原子纠缠,用内禀纠缠度量三原子纠缠,通过数值计算,给出两原子和三原子纠缠随时间演化曲线,通过适当调控激光驱动场和局域激光场,在远距离三原子中任意两原子实现未知量子态的隐形传送。