Determination of capsaicin and dihydrocapsaicin in Capsicum fruit samples using high performance liquid chromatography

The aim of the present study was to determine the content of capsaicin and dihydrocapsaicin in Capsicum samples collected from city markets in Riyadh (Saudi Arabia), calculate their pungency in Scoville heat units (SHU) and evaluate the average daily intake of capsaicin for the population of Riyadh. The investigated samples consisted of hot chillies, red chillies, green chillies, green peppers, red peppers and yellow peppers. Extraction of capsaicinoids was done using ethanol as solvent, while high performance liquid chromatography (HPLC) was used for separation, identification and quantitation of the components. The limit of detection (LOD) of the method was 0.09 and 0.10 μg/g for capsaicin and dihydrocapsaicin, respectively, while the limit of quantification (LOQ) was 0.30 and 0.36 μg/g for capsaicin and dihydrocapsaicin, respectively. Hot chillies showed the highest concentration of capsaicin (4249.0 ± 190.3 μg/g) and the highest pungency level (67984.60 SHU), whereas green peppers had the lowest detected concentration (1.0 ± 0.9 μg/g); green peppers, red peppers and yellow peppers were non pungent. The mean consumption of peppers for Riyadh city population was determined to be 15.5 g/person/day while the daily capsaicin intake was 7.584 mg/person/day.     

Spectrofluorimetric determination of guanethidine sulphate,guanfacine hydrochloride,guanoclor sulphate and guanoxan sulphate in tablets and biological fluids,using benzoin

A sensitive and rapid Spectrofluorimetric method for the determination of guanethidine sulphate, guanfacine hydrochloride, guanoclor sulphate and guanoxan sulphate in tablets and spiked human serum and urine samples is described. The method is based on the reaction of monosubstituted guanidino compounds in an aqueous potassium hydroxide solution with benzoin, in the presence of -mercaptoethanol and sodium sulphite. Highly fluorescent derivatives were obtained, with excitation and emission maximum wavelengths around 325 and 430 nm, respectively. In optimal reaction conditions, the linearity ranges were 0.04–0.28 g/ml, with relative standard deviations less than 2%. The method has been successfully applied to the determination of these drugs in tablets. The results are highly correlated with the B.P. method. Chloroform (or for guanoxan dichloromethane) was used to extract the drugs from serum and urine at basic pH, followed by the proposed fluorimetric method. The limit of detection is 0.02 g/ml for the selected drugs.     

Prediction of peptides retention behavior in reversed-phase liquid chromatography based on their hydrophobicity

Hydrophobicity is an important physicochemical property of peptides and proteins. It is responsible for their conformational changes, stability, as well as various chemical intramolecular and intermolecular interactions. Enormous efforts have been invested to study the extent of hydrophobicity and how it could influence various biological processes, in addition to its crucial role in the separation and purification endeavor as well. Here, we have reviewed various studies that were carried out to determine the hydrophobicity starting from (i) simple amino acids solubility behavior, (ii) experimental approach that was undertaken in the reversed-phase liquid chromatography mode, and ending with (iii) some examples of more advanced computational and machine learning models.     

Solar dryers as a promising drying technology: a comprehensive review

Journal of Thermal Analysis and Calorimetry - Dryers are utilized in food industry and agriculture in order to extend the useful lifespan of corps. Thermal energy is required for water removal in...     

Field-induced phase transitions in chiral smectic liquid crystals studied by the constant current method

In ferroelectric liquid crystals, phase transitions can be induced by an electric field. The current constant method allows these transition to be quickly localized and thus the(E, T) phase diagram of the studied product can be obtained.In this work, we make a slight modification to the measurement principles based on this method. This modification allows the characteristic parameters of ferroelectric liquid crystal to be quantitatively measured. The use of a current square signal highlights a phenomenon of ferroelectric hysteresis with remnant polarization at null field, which points out an effect of memory in this compound.     

Identification of Molecular Transport Mechanisms in Micro-Porous Hydrotalcite–Silica Membrane

Hydrotalcite (HT) materials have been known to be able to adsorb \(\hbox {CO}_{2}\) even at high temperature. However, HT has not been made into a micro-porous membrane because of its meso-porous nature. In order to form a micro-porous HT membrane, silica was selected as a host matrix due to its ability to retain its micro-porosity. In this paper, a micro-porous hydrotalcite–silica membrane was formed on a meso-porous \(\upgamma \) -alumina layer supported by a macro-porous \(\upalpha \) -alumina substrate. Most of the micro-porosity determined from nitrogen adsorption measurement was found to be either closed or open but not interconnected, whereas most of the meso-porosity (at ca. 11.2 nm) in the micro-porous membrane was open and interconnected, thereby promoting gas flow. Viscous flow mechanism was observed to dominate transport of gases in macro-porous membrane. Knudsen diffusion dominated transport of gases in meso-porous membrane. On the other hand, surface affinity influenced the transport of carbon dioxide through the micro-porous membrane rather significantly. While permeability of pure hydrogen and carbon dioxide were independent of pressure, the permeability of the gases in the binary mixtures decreased with increasing pressure. Both experiment and simulation demonstrated consistent results.     

Testing Aluminum Alloy from Quasi-static to Dynamic Strain-rates with a Modified Split Hopkinson Bar Method

An aluminum alloy¹ was tested at quasi-static to dynamic strain-rates (from 10⁻¹ to 5 10³ s⁻¹), using a single measuring device, a modified Split Hopkinson Bar. A wave separation technique [Bussac et al., J Mech Phys Solids 50:321–350, 2002] based on the maximum likelihood method was applied to process the strain and velocity measurements recorded at various points on each bar. With this method, it is possible to compute the stress, strain, displacement and velocity at any point on the bar. Since the measurement time is unlimited, the maximum strain measured in a given specimen no longer decreases with the strain-rate, as occurs with the classical Split Hopkinson Bar method. ¹The authors wish to thank the automobile manufacturer who provided samples of the alloy used in this study. For reasons of commercial and industrial confidentiality, we were not informed about the composition of this alloy.