Z箍缩驱动器与丝阵负载耦合特性研究

以丝阵内爆零维模型为基础,采用Pspice模拟行为建模方法,建立了丝阵内爆动态电感与Z箍缩驱动器耦合的全电路模型,实现驱动器放电过程与丝阵内爆过程的自洽求解,并研究了丝阵参数、电路参数对内爆过程的影响.结果表明:丝阵负载与驱动器存在强耦合关系,丝阵参数、电路参数对丝阵峰值箍缩电流、内爆时间、内爆动能影响很大;在驱动器参数不变,内爆时间不超过电路固有放电周期1/4的前提下,峰值箍缩电流、内爆时间、内爆动能随丝阵质量的增加而增大,内爆时间随丝阵初始半径的增加而增大;在丝阵参数不变时,随着驱动器等效电容的增大,内爆时间减小,丝阵内爆动能增大,但驱动器储能转化为内爆动能的效率却先增大后减小.对于特定的驱动器,优化的丝阵参数应使内爆过程充分利用驱动器固有放电周期的上升沿,使丝阵快速收缩的时间起点接近电路固有放电周期的四分之一,以获得最大的动能效率. 关键词： Z箍缩驱动器 零维内爆模型 模拟行为建模 耦合特性     

非等电子Sb替换Cu和Te后黄铜矿结构半导体Cu_3Ga_5Te_9的热电性能

热电材料是一类能够实现热与电相互转换的功能材料,在制冷和发电领域极具应用潜力.本文采用金属Sb元素非等电子替换Cu3Ga5Te9化学式中的Cu和Te,观察到材料Seebeck系数和电导率提升的现象.这些电学性能的改善与载流子浓度和有效质量的增大及迁移率基本维持不变有关.载流子浓度的提高是由于Sb原子占位在Te晶格位置后费米能级进入到价带所产生的空穴掺杂效应所致,同时也与Cu含量减少后铜空位(V-1Cu)浓度增大相关联.另外,非等电子替换后,阴离子(Te2-)移位导致了晶格结构缺陷参数u和η的改变,其改变量fiu和fiη与材料晶格热导率(κL)的变化密切相关.在766 K时,适量的Sb替换量使材料的最大热电优值(ZT)达到0.6,比Cu3Ga5Te9提高了近25%.因此,通过选择替换元素、被替换元素及替换量有效地调控了材料的电学及热学性能,在黄铜矿结构半导体中实现了非等电子元素替换改善热电性能的思想.     

Fiber-optic sensor based on evanescent wave absorbance around 2.7 μm for determining water content in polar organic solvents

The feasibility of sapphire fiber-optic sensors based on evanescent wave absorption spectroscopy in the infrared range for quantitative determination of water content in polar organic solvents has been investigated. Evanescent wave absorption spectra of sapphire fiber-optic sensors in glycerol, ethanol, and glycol with different water concentrations obtained and analyzed, respectively. Evanescent absorbance of the sensors in those organic solvents has been utilized to implement for in situ monitoring water concentration in organic solvents. The evanescent absorbance of sensors in glycerol and glycol has been found to vary linearly with water content in the range 0–30 % and in ethanol in the range 0–10 %, respectively. The fiber-optic sensors based on evanescent absorbance for monitoring water concentrations in those organic solvents are acceptably accurate, cost-effective, and reliable. Some methods to improve the accuracy of predicated water content in those organic solvents are also suggested. Overall, the results demonstrate that the sapphire fiber-optic sensor based on evanescent absorption spectroscopy is a promising candidate for prediction of water content in polar organic solvents in on-line and remote situation.     

基于微扫描镜的激光投影

利用微机械加工技术制造出一种新型微扫描镜,结合半导体激光器,可用于投影显示.激光器发出的光束被两个分别沿着X轴、Y轴扭转的镜面相继反射,扫描出二维图形.实验测得扫描镜在15 V电压,频率为扫描镜谐振频率2倍的方波信号驱动下,镜子的光学扫描角度达±12°.由于每个镜子都沿各自轴以简谐规律扭转,扫描所得投影为李萨如图形.通过分析图形的形成原理并用Matlab仿真,选出了适用用于任意图案显示的扫描镜谐振频率组合(X轴2 400 Hz, Y轴2 425 Hz).该组合可以形成194×192个像素点,刷新频率为25 Hz.在此基础上提出了一种通过调制激光开关来进行投影显示的方法.     

High-efficiency resonantly pumped room temperature Ho:YVO4 laser

An efficient 2 μm room temperature Ho:YVO(4) laser resonantly pumped by a 1.94 μm Tm:YAP laser is demonstrated, for the first time to our knowledge, in this Letter. Up to 8.58 W of laser output at 2053 nm is obtained with the optical-to-optical conversion efficiency as much as 41.2%. The output beam had quality of M² factor with Mx(2) of 3.58 and My(2) of 1.76 at 8 W output level. In addition, we also obtained 4.18 W laser output at 2066 nm and 7.04 W at 2040 nm from the Ho:YVO(4) laser with conversion efficiency of 27.8% and 33.8%, respectively.     

Accurate method for measuring the thermal coefficient of group birefringence of polarization-maintaining fibers

We present a method to accurately measure the group birefringence variation with temperature in high-birefringence polarization-maintaining (PM) fibers using a distributed polarization analyzer. By analyzing polarization cross-talk peaks purposely induced at both ends of a PM fiber, the temperature coefficient of group birefringence can be accurately obtained. We confirm the theoretical prediction that the group birefringence of PANDA and TIGER PM fibers decrease linearly with temperature from -40 °C to 80 °C, and find that the temperature coefficients are -5.93 × 10(-7) °C(-1) and -5.29 × 10(-7) °C(-1) for two types of PANDA fibers, and -5.36 × 10(-7) °C(-1) for a TIGER fiber.     

有机/无机复合结构光电导型器件的光激发机制

制备了PVK/ZnS有机无机复合的光电导型器件 ,器件结构分别为Glass/ITO/PVK/Al;Glass/ITO/ZnS/Al;Glass/ITO/ZnS/PVK/Al。通过研究此复合器件在外加电场作用下的稳态光电导激发谱 ,得到了基本光激发过程。把PVK/ZnS的吸收谱和器件的光电导谱进行比较 ,知道虽然两者的吸收对器件光电流都有贡献 ,但有效部分在PVK和ZnS的界面处。最大光电流对外加电场的依赖性与器件的暗电流和光电流谱为此提供了证据     

有耗异向介质层覆盖普通介质圆柱电磁特性的研究

研究了线电流源平行放置在有耗异向介质层覆盖的无限长介质圆柱附近模型的电磁特性.首先,提出电磁模型并给出此电磁模型的精确解.其次,利用精确解进行数值计算,得到不同电磁参数情况下该电磁模型的近场分布图形,并通过方向性系数和归一化辐射阻抗研究其远场特性.由于有耗异向介质的负折射特性和损耗的同时作用,相比于无耗异向介质层以及有耗普通介质层,得到了有耗异向介质层覆盖普通介质圆柱模型在近场和远场特性上极为不同的电磁特性. 关键词： 线电流源 异向介质 方向性系数 辐射阻抗