溶胶-凝胶法合成纳米铬酸锶镧的工艺研究

以硝酸镧、硝酸铬、硝酸锶为原料，乙二醇为分散剂，柠檬酸为胶溶剂，用溶胶-凝胶法合成纳米级的铬酸锶镧粉体。利用TG，DSC，XRD分析研究了粉料的晶化过程。利用HREM分析了煅烧温度、含锶量对粉料粒径的影响。研究表明，获得纳米晶的最佳烧结温度在800℃。随着锶掺杂量的增加，粉料的粒径逐渐变小。     

热变形奥氏体静态再结晶行为的研究

本文利用双道次压缩的方法,在Gleeble1500热模拟实验机上研究了低碳钢SS400在变形间隔时间内奥氏体的软化行为,以便为制定合理的细化晶粒轧制工艺提供实验和理论基础.采用后插法计算了在不同真应变条件下的静态再结晶率.通过双道次压缩测试静态软化动力学实验的表明,实验钢变形后很容易发生静态软化.在真应变为0.4,0.2时,静态再结晶激活能分别是Qrec=189.3,179.2kJ/mol.     

硝酸钐水合物热分解过程的研究

Sm(NO_3)_3·6H_2O热分解过程的研究工作虽有文献报道,但结果不尽相同。文献[2]不同于文献[1,3],认为分解过程中存在无水盐阶段;文献[3]不同于文献[1,2],认为分解过程中存在低水合物。而且文献尚缺低水合物热分解机理的报道。我们也曾做过一些工作,但脱水阶段也不详尽。为此,我们详细地研究了Sm(NO_3)_3·nH_2O(n=     

硝酸钬水合物热分解及配位性质的研究

文献报道了Ho(NO_3)_3·5H_2O和Ho(NO_3)_3·(?)H_2O的热分解行为,但Ho(NO_3)_3·5H_2O脱水机理不清,Ho(NO_3)_3·4H_2O按文献[1]不能制出。六水、三水合物的热分解及与DMF的配位作用未见报道。     

硝酸钆低水合物的制备及表征

本文用两种方法制得硝酸钆的低水合物Gd(NO_3)_3·5H_2O、Gd(NO_3)_3·3.5H_2O,其中Gd(NO_3)_3·3.5H_2O是文献中尚未报道的 ,给出了它们的M.P.和X-衍射特征值。     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

Blue-emitting LaAlO3:Tm3+, In3+ phosphors for field emission displays

Tm³⁺ and In³⁺ co-doped LaAlO₃ phosphors were prepared by a Pechini sol–gel method and characterized by X-ray diffraction, scanning electron microscope, and cathodoluminescence spectrum. The phosphor is composed of slightly aggregated particles with approximately spherical shape and a narrow size range of 1.0–1.5 μm. Under voltage electron beam excitation, the phosphor shows the characteristic emissions of Tm³⁺. All the color purity, radiant efficiency, luminous efficiency, and stability of the optimum LaAlO₃:0.01Tm³⁺, 0.04In³⁺ phosphor are superior to these of commercial ZnS:Ag,Cl phosphor. These tests suggest that it could be a potential candidate as a blue phosphor for field emission displays.     

Thermogravimetric analysis of carbide slag

Potential of carbide slag as transesterification catalyst is validated. Combined with X-ray fluorescence for ingredient determination, X-ray diffraction for textural phase analysis, scanning electron microscope for surface morphology observation and Hammett indicator for basic strength mensuration, thermal event of carbide slag is investigated through thermogravimetric analysis to estimate the potential of this calcium-based industrial waste as transesterification catalyst. Further, kinetic parameters are calculated through model-free method, where the experiments are conducted at temperature heating rates of 5, 10, 15, and 20 K min^?1. As for activation energy and reaction order, Vyazovkin method and Avrami theory are respectively mentioned. Meanwhile, catalytic performance of carbide slag is labeled by transesterification efficiency and calcium hydroxide is conditionally mentioned for comparison. In conclusion, potential of carbide slag as transesterification catalyst is adequately validated.     

CH4/空气简化动力学机理数值验证

选择绕圆柱预混燃烧算例，验证CH₄/空气三种简化动力学机理（16s41r、15s19r和53s325r）.考虑均匀来流，忽略湍流和湍流与燃烧相互作用以及燃料扩散效应，假设层流有限反应速率，采用保自由流5阶WENO格式求解多组分Euler方程组，得到CH₄/空气预混燃烧流场温度等值线、沿驻点线压力和温度及其CH₄、CO和CO₂质量百分数分布.结果表明：三种简化动力学机理给出的流场均出现弓形激波和火焰面，弓形激波和火焰驻点距离及其形状、诱导区宽度和简化动力学机理相关.当圆柱直径增大，弓形激波和火焰向圆柱上游移动，对应的驻点距离均增大，诱导区宽度变短，点火延时变小，但火焰和弓形激波位置次序未变化.53s325r模型要比16s41r模型和15s19r模型精度要高，点火延时覆盖的压力和温度范围也较宽，所有简化机理均未完全反应，在较大圆柱直径下游达到化学平衡.     

Screening potential antagonists of epidermal growth factor receptor from Marsdenia tenacissima via cell membrane chromatography model assisted by HPLC–ESI–IT–TOF–MS

Marsdenia tenacissima, or Tongguanteng in Chinese, is a traditional Chinese herb and has a broad application in clinical practice for its pharmacological effects of treating asthma, pneumonia, tonsillitis, pharyngitis tumors, etc. However, few studies have reported the screening of the active components of this medicine for tumor therapy. In this work, a two‐dimensional analytical system was developed to screen antagonists of epidermal growth factor receptor (EGFR) from M. tenacissima. A fraction was retained on the EGFR cell membrane chromatography (CMC) column, separated and identified as tenacissoside G (TG), tenacissoside H (TH) and tenacissoside I (TI) by two‐dimensional HPLC–IT–TOF–MS. Molecular docking and 3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2‐H‐tetrazolium bromide (MTT) assay were carried out to assess the activity of TS (including TG, TH and TI). Molecular docking results showed that the binding mode of TS on EGFR is similar to that of gefitinib. The MTT assay demonstrated that gefitinib and TS (especially TI) could inhibit the growth of EGFR highly expressed cell lines in a dose‐dependent manner in the range of 5–50 μmol/L. In conclusion, the two‐dimensional EGFR/CMC–HPLC–IT–TOF–MS system could be a useful approach in drug discovery from traditional Chinese medicines for searching for potential antitumor candidates.