A cell functional minimization scheme for parabolic problem

We are interested in a robust and accurate finite volume scheme for 2-D parabolic problems derived from the cell functional minimization approach. The scheme has a local stencil, is locally conservative, treats discontinuity rigorously and leads to a symmetric positive definite linear system. Since the scheme has both cell centered unknowns and cell edge unknowns, the computational cost is an issue and a parallel algorithm is then suggested based on nonoverlapping domain decomposition approach. The interface condition is of the Dirichlet–Robin type and has a parameter λ. By choosing this parameter properly, the convergence of the iteration process could be sped up. Numerical results for linear and nonlinear problems demonstrate the good performance of the cell functional minimization scheme and its parallel version on distorted meshes.     

Scope and regioselectivity of the 1,3-dipolar cycloaddition of azides with methyl 2-perfluoroalkynoates for an easy,metal-free route to perfluoroalkylated 1,2,3-triazoles

1,3-Dipolar cycloadditions of methyl 2-perfluoroalkynoates with various azides have been examined, leading to a simple metal-free synthetic protocol for the synthesis of perfluoroalkylated 1,2,3-triazoles. The regiochemical results demonstrated that the cycloaddition was controlled by FMO (the frontier molecular obitals) interaction and steric hindrance in transition states.     

Influence of magnetic powders on the tribological performance of a novel magnetic brake material

By adding magnetic powders into matrix material, it has been proved to be a creative approach to improve tribological properties of brake materials. In this paper, a novel magnetic brake material with Nd–Fe–B and nano-Fe₃O₄ was developed, and the influential mechanism of these two magnetic powders and their content on the friction and wear performance was deeply discussed. Firstly, some experiments were carried out to investigate the tribological performance and influential mechanisms of four groups of brake pad samples with different magnetic powders. Furthermore, based on these results, further experiments for investigating the influence that Nd–Fe–B contents have on the tribological properties were conducted. According to the theoretical analysis about experiments, it was concluded that nano-Fe₃O₄ is beneficial to promote the formation of friction film and has certain lubricant effects. However, Nd–Fe–B has double effects on the formation of friction film. It will have positive effects when its content is less than a certain value. Otherwise, it will destroy the structure of friction film. Conclusively, it is believed that this study will be significantly valuable and meaningful for developing new brake materials and improving safety reliability of mechanical brakes.     

Preparation and performance of a novel polyimide foam

A new type of polyimide foam (PIF) was prepared and characterized based on a one‐pot process by the reaction of a first solution with different ratios of a second solution. The first solution was comprised of pyromellitic dianhydride (PMDA), N, N‐dimethyl formamide (DMF), methanol, water, surfactant, and catalysts, while the second solution contained polyaryl polymethylene isocyanate (PAPI). In the present study, the relationships among compositions, structures, and properties of PIFs were investigated. The results indicated that with the increase in the weight ratio of PAPI/(first solution), the foaming degrees of PIFs increased from 10.14 to 10.52 times and the apparent densities before postcure decreased from 15.96 to 14.51 kg/m³. The open cell contents, average sound absorption coefficients, and average cellular diameters of PIFs after postcure increased with increase in the weight ratio of PAPI/(first solution). The glass transition temperatures (T_g) of PIFs after postcure first increased from 287 to 299°C, then decreased to 292°C, and the 5% weight loss temperatures and 10% weight loss temperatures presented the same trend as well. The compressive and flatwise tensile properties scaled very well with the relative densities of the foams after postcure, with the highest compressive strength of 0.03 MPa and the highest flatwise tensile strength of 0.15 MPa. Copyright © 2011 John Wiley & Sons, Ltd.     

LOCAL BENDING OF THIN FILM ON VISCOUS LAYER

Effects of deposition layer position film are systematically investigated. Because the and number/density on local bending of a thin deposition layer interacts with the thin film at the interface and there is an offset between the thin film neutral surface and the interface, the deposition layer generates not only axial stress but also bending moment. The bending moment induces an instant out-of-plane deflection of the thin film, which may or may not cause the socalled local bending. The deposition layer is modeled as a local stressor, whose location and density are demonstrated to be vital to the occurrence of local bending. The thin film rests on a viscous layer, which is governed by the Navier-Stokes equation and behaves like an elastic foundation to exert transverse forces on the thin film. The unknown feature of the axial constraint force makes the governing equation highly nonlinear even for the small deflection chse. The constraint force and film transverse deflection are solved iteratively through the governing equation and the displacement constraint equation of immovable edges. This research shows that in some special cases, the deposition density increase does not necessarily reduce the local bending. By comparing the thin film deflections of different deposition numbers and positions, we also present the guideline of strengthening or suppressing the local bending.     

晶粒尺寸对Ba0.70Sr0.30TiO3陶瓷介电性能的影响规律及机理研究

通过制备晶粒尺寸处于0.1-10 μm之间的致密Ba0.70Sr0.30TiO3陶瓷,系统研究了晶粒尺寸对居里温度TC、铁电相介电常数εF、峰值介电常数εM的影响规律,并深入分析了其内在的影响机理.研究表明:晶粒尺寸减小时,TC刚开始基本不变,直到晶粒尺寸小到一定程度时才开始降低,此变化规律可由Buesseum的内应力模型解释;随晶粒尺寸的增加,εF先增加后减小,此变化规律可由Shaikh的串并联模型来解释,主要影响因素有内应力、畴、晶界;εM随晶粒尺寸的增加,在晶粒尺寸较小时先增加后减小,晶粒尺寸较大时略有增加,此变化规律可由弥散相变理论和串并联模型共同解释,在晶粒尺寸较小时主要影响因素为内应力、微畴和晶界,晶粒尺寸较大时主要影响因素为晶界.     

High selectively oxidative bromination of toluene derivatives by the H_2O_2-HBr system

An aqueous solution of hydrogen peroxide and hydrogen bromide illuminated by a 60 W incandescent light bulb serves as a source of bromine radicals.Various substituted toluenes（NO₂,Cl,Br,H,CH₃） were high selectively brominated at the benzyl position for monobromination in CH₂C1₂ at ice water with catalyst free.This simple but effective bromination of toluene derivatives with an aqueous H₂O₂-HBr system is characterized with the use of inexpensive reagents and a lower impact on the environment, which make it a good alternative to the existing bromination methods.