Photodissociation dynamics of pyridine

Photodissociation of pyridine, 2,6-d2-pyridine, and d5-pyridine at 193 and 248 nm was investigated separately using multimass ion imaging techniques. Six dissociation channels were observed at 193 nm, including C5NH5 --> C5NH4 + H (10%) and five ring opening dissociation channels, C5NH5 --> C4H4 + HCN, C5NH5 --> C3H3 + C2NH2, C5NH5 --> C2H4 +C3NH, C5NH5 --> C4NH2 + CH3 (14%), and C5NH5 --> C2H2 + C3NH3. Extensive H and D atom exchanges of 2,6-d2-pyridine prior to dissociation were observed. Photofragment translational energy distributions and dissociation rates indicate that dissociation occurs in the ground electronic state after internal conversion. The dissociation rate of pyridine excited by 248-nm photons was too slow to be measured, and the upper limit of the dissociation rate was estimated to be 2x10(3) s(-1). Comparisons with potential energies obtained from ab initio calculations and dissociation rates obtained from the Rice-Ramsperger-Kassel-Marcus theory have been made.     

Temperature-programmed desorption and adsorption of hydrogen on Mo2N

Hydrogen adsorption-desorption over Mo₂N has been studied using a temperature-programmed technique. It is revealed that hydrogen on Mo₂N exhibits very high mobility leading to migration of the surface hydrogen into the sublayer and bulk of the sample or the reverse. The surface hydrogen species are preferentially formed when adsorption is carried out below 573 K. On increasing the adsorption temperature to above 573 K, the quantity of hydrogen species located in the sublayer or/and bulk of the Mo₂N sample increases significantly.     

Syntheses of 4-(2-hydroperoxy-2,2-diarylethyl)-3,5-dimethylpyrazoles, 4-(2-hydroxy-2,2-diarylethyl)-3,5-dimethylpyrazoles and the related compounds

The reactions of 1,1-disubstituted ethenes with 2,4-pentanedione in the presence of manganese(III) acetate and atmospheric oxygen yielded 4-acetyl-6,6-diaryl-3-methyl-1,2-dioxan-3-ols. The latter gave 4-(2-hydroperoxy-2,2-diarylemyl)-3,5-dimethylpyrazoles by the reaction with hydrazines in methanol-acetic acid (1:1 v/v) at 50° in 15-77% yields, or 4-(2-hydroxy-2,2-diarylethyl)-3,5-dimethylpyrazoles by the reaction with hydrazines in methanol in 2-78% yields. The acid-catalyzed reaction of 4-(2-hydroperoxy-2,2-diarylethyl)-3,5-dimethylpyrazoles yielded 4-(aroylmethyl)-3,5-dimethylpyrazoles (15-55%) and 4-(2,2-diarylethenyl)-3,5-dimethylpyrazoles (9-29%).     

Single-sweep polarography of the copper(II)-3-hydroxy-1-p-sulphonatophenyl-3-phenyltriazene complex and its analytical applications

A polarographic investigation of the copper-3-hydroxy-1-p-sulphonatophenyl-3-phenyltriazene (HSPT) complex in 0.05 M sodium tetraborate medium is described and a simple and sensitive single-sweep polarographic method for the determination of trace amounts of copper in biological samples is proposed. The complex was shown to be Cu(HSPT)2 with log beta' = 11.38. The polarographic wave is caused by the reduction of copper(II) in the adsorbed complex to copper amalgam on the surface of a mercury electrode. The current peak is directly proportional to the concentration of copper in the range 8.0 x 10(-9)-4.0 x 10(-6) M and the detection limit is 5.0 x 10(-9) M.     

合成多肽的电喷雾质谱研究

利用电喷雾多极串联质谱对3种合成多肽进行了系统的鉴定和分析研究。首先通过全扫描模式测定了其分子量，然后选择[M H]^ 或[M 2H]^2 离子通过串联质谱(MS／MS)得到碎片离子，采用y离子和b离子互补的方法测定了多肽序列。利用文献数据对这种方法进行了验证，实验结果表明，该方法简便、快速、实用。     

高富勒烯的提取,分离和分析

采用二硫化碳重结晶富勒烯混合物或二硫化碳二次抽提烟灰以提取高富勒烯（ｈｉｇｈｅｒｆｕｌｅｒｅｎｅｓ，Ｃｎ，ｎ＞７０）。产物经高效液相色谱分析，高富勒烯的含量从１％分别提高到４％和６％；经激光飞行时间质谱证明，产物中除含主要成分Ｃ６０和Ｃ７０以外，还含有Ｃ７６、Ｃ７８、Ｃ８２、Ｃ８４以及更高碳原子的富勒烯。     

Further studies of M3(μ3-O)(μ-X)3(μ-O2CCH3)3L3 (M=Mo,W) type clusters with nine core electrons

Four new compounds having nine cluster electrons and cores of the types Mo₃OCl₃, Mo₃OBr₃, and W₃OCl₃ are reported. Compound (1) prepared by reduction of [Bu₄N][Mo₃OCl₆(OAc)₃] in THF with metallic zinc, was shown by X-ray crystallography to be Mo₃OCl₄(OAc)₃ (THF)₂ (1). It forms crystals in space groupP2₁ with unit cell dimensionsa=9.472(2) Å,b=13.546(4) Å,c=9.652(2) Å, =101.70(2)°,V=1201(1) Å₃,Z=2. The [Mo₃(₃-O)(-Cl)₃]⁴⁺ core is surrounded by three -O₂CCH₃ anions, one Cl^–, and two THF and has Mo-Mo distances of 2.620(1) Å, 2.613(1) Å, and 2.530(1) Å, with the shortest bond between the two Mo atoms to which the THF molecules are coordinated. Compounds [Bu₄N]₂ [Mo₃OBr₆(O₂CCH₃)₃] · Me₂CO, (2) and [Mo₃OBr₃(O₂CCH₃)₃(PMe₃)₃]₃ · BF₄, (3) are the first two nine-electron Mo₃ species with a [Mo₃(₃-O) Br₃]⁴⁺ core. Both were obtained by zinc reduction of [Mo₃OBr₆(O₂CCH₃)₃]^– in the presence of (NBu₄) Br (2) or PMe₃ and NaBF₄ (3), and each was characterized crystallographically. Compound (2) crystallized in space group Cc with unit cell dimensionsa=25.037(5) Å,b=12.827(2) Å,c=21.484(4) Å, =122.96(1)⁰,V=5790(3) ų,Z=4. While the anion has no crystallographically required symmetry, its virtual symmetry is C_3v . The Mo-Mo distances are 2.619(2) Å, 2.610(3) Å, 2.644(2) Å, with a mean value of 2.624[14] Å. Compound (3) crystallized in space groupP2₁/c with unit cell dimensionsa=10.846(2) Å,b=25.033(5) Å,c=12.641(5) Å, =94.74(2)⁰,V=3420(2) ų,Z=4. The cation occupies a general position but has virtual C_3v symmetry, with Mo-Mo distances of 2.601(2) Å, 2.610(2) Å, 2.627(2) Å, with a mean value of 2.613[14] Å. Thus the anionic and cationic Mo₃ clusters in (2) and (3), respectively, have average Mo-Mo distances that are equal within experimental error. Compound (4), [NEt₄]₂ [W₃OCl₆(O₂CCH₃)₃] is the first 9-electron compound of this type containing tungsten. It was prepared by reduction of [Et₄N][W₃OCl₆(OAc)₃] in benzene with Na/Hg. It crystallized in space groupP2₁2₁2₁ with unit cell dimensionsa=11.076(2) Å,b=14.345(2) Å,c=21.026(3) Å,V=3574(1) ų,Z=4. The anion resides on a general position but has virtual C_3v symmetry, with W-W distances of 2.577(1) Å, 2.612(1) Å, 2.584(1) Å and a mean value of 2.591[15] Å.     

Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

High-yield solvothermal formation of magnetic CoPt alloy nanowires

One-dimensional (1D) magnetic nanomaterials have attracted much attention recently because of their applications in magnetic recording and spintronics. Nevertheless, it remains a challenge to prepare free-standing magnetic nanowires in high yield. This Communication reports the successful high-yield synthesis of an interesting 1D ferromagnetic CoPt alloy by direct decomposition of platinum acetylacetonate and cobalt carbonyl compound in ethylenediamine solvent through a solvothermal reaction. The CoPt alloy nanowires obtained have a tunable diameter of 10-50 nm and a length along the longitudinal axis of up to several microns, depending on crystallization temperature and reaction time. A unique formation mechanism involving coarsening and ripening under solvothermal conditions was discovered. This research opens new opportunities in synthesizing nanomaterials through low-temperature solvothermal processes.     

Photoisomerization and photodissociation of aniline and 4-methylpyridine

Photoisomerization and photodissociation of aniline and 4-methylpyridine at 193 nm were studied separately using multimass ion imaging techniques. Photofragment translational energy distributions and dissociation rates were measured. Our results demonstrate that more than 23% of the ground electronic state aniline and 10% of 4-methylpyridine produced from the excitation by 193 nm photons after internal conversion isomerize to seven-membered ring isomers, followed by the H atom migration in the seven-membered ring, and then rearomatize to both methylpyridine and aniline prior to dissociation. The significance of this isomerization is that the carbon, nitrogen, and hydrogen atoms belonging to the alkyl or amino groups are involved in the exchange with those atoms in the aromatic ring during the isomerization.