Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

A general method for the preparation of N-heterocyclic carbene–silver(I) complexes in water

A new synthetic method leading to N-heterocyclic carbene–silver(I) complexes [(R₂-NHC)₂Ag]⁺ [AgX₂]^? is developed by using benzimidazolium compounds, NaOH (as a base), silver salts and water (as the reaction medium). Single-crystal X-ray structure revealed that compound 1 comprises a linear [Ag-(Et₂-Bimy)₂]⁺ cation and a linear [AgBr₂]^? anion. These two ions are linked through an Ag^I–Ag^I association and staggered at an angle of 90.3°.     

Production from ilmenite of TiO2-supported catalysts for selective catalytic reduction of NO with NH3

Economic production of titanium dioxide (yield >98 %) from ilmenite has been achieved by use of a modified sulfate reduction process. A series of samples were prepared by varying the concentration of titanium dioxide nuclei (0.2, 0.3, and 0.6 %) and further impregnation with antimony and vanadia. The structural and acidic properties of the samples were comprehensively studied by X-ray diffraction (XRD), transmission electron microscopy, BJH pore size distribution, and temperature-programmed desorption of NH₃. The XRD results revealed the presence of intense peaks from anatase titanium dioxide. Enhancement of surface area was observed for second-time filtered samples, possibly because of loss of iron from the bulk. As a result, formation of additional micropores was apparent from N₂ adsorption and desorption isotherms. Among all the antimony and vanadia-doped samples, the first-time filtered sample with the low concentration of nuclei (0.2 %) had the highest catalytic activity at low temperatures, owing to its larger pore size and abundant acidic species.     

Enhancement of naringenin solution concentration by solid dispersion in cellulose derivative matrices

Naringenin (Nar) is an important bioactive flavonoid with poor organic solubility and oral bioavailability. It is highly promising for treatment of conditions including diabetes, hyperlipidemia, and hepatitis C infection. Amorphous solid dispersion (ASD) of Nar is an appealing way to enhance its solubility, and carboxylated cellulose esters are attractive polymers for this purpose because of their ability to stabilize drugs against crystallization in both solid and solution phases, while restricting drug release to the pH of the small intestine (ca. 6.8). We demonstrate that ASDs of Nar can be formed using such carboxylated cellulose derivatives as cellulose acetate adipate propionate (CAAdP), carboxymethylcellulose acetate butyrate (CMCAB) and hydroxypropylmethylcellulose acetate succinate (HPMCAS). We compare Nar solution concentrations and release profiles from these cellulosic ASDs to those from pure crystalline Nar, and to Nar ASD in poly(vinylpyrrolidinone) (PVP). We show that all polymers in this study form ASDs with Nar, that the PVP ASDs release Nar at both gastric (1.2) and small intestine (6.8) pH, and that the cellulosic polymers release Nar selectively at neutral pH. Solution concentrations of Nar are significantly enhanced from these ASDs. These preliminary studies indicate that HPMCAS, CAAdP, and CMCAB are practical ASD polymers for Nar due to their ability to generate and stabilize high solution concentrations, and their pH-triggered drug release.     

Improved methods for the synthesis and isolation of imidazolium based ionic salts

Solvent-free reactions were used for the synthesis of a series of imidazolium-based ionic salts: 3,3′-[pyridine-2,6-diylbis(methylene)]bis(1-R-1H-imidazol-3-ium)chloride; (R = methyl, ethyl, butyl, isobutyl, hexyl, and benzyl). A simple and effective filtration process was used to isolate all the products in high purity and with yields ?93% within a 24 h period. The highly pure ionic compounds which are precursors to N-heterocyclic carbene ligands used in catalysis were fully characterized as gray-white hygroscopic salts.     

Independent isomeric-yield ratio of 89m,gNb from 93Nb(γ, 4n), natZr(p,xn), and 89Y(α, 4n) reactions

The independent isomeric-yield ratios of ^89m,gNb for the ⁹³Nb(γ, 4n) ^89m,gNb reaction with bremsstrahlung energies of 45-, 50-, 55-, 60-, and 70-MeV were measured by the activation and the off-line γ-ray spectrometric technique at 100 MeV electron linac of the Pohang accelerator laboratory. The isomeric-yield ratios of ^89m,gNb for the ^natZr(p, xn) ^89m,gNb and the ⁸⁹Y(α, 4n) ^89m,gNb reactions were measured by using a stacked-foil activation technique with the proton energies of 19–45 MeV and alpha energies of 38.9-, 40.5-, and 42.5-MeV at the MC-50 cyclotron of Korea Institute of Radiological and Medical Sciences. The measured isomeric-yield ratio of ^89m,gNb from the ⁹³Nb(γ, 4n), ^natZr(p, xn), and ⁸⁹Y(α, 4n) reactions were compared with the similar literature data in the ⁸⁹Y(³He, 3n) reaction. It was found that the isomeric yield ratio of ^89m,gNb increases with projectile energy, which indicate the effect of excitation energy. However, for the similar compound nucleus with the same excitation energy, the isomeric-yield ratios of ^89m,gNb in the ⁸⁹Y(α, 4n) and ⁸⁹Y(³He, 3n) reactions are higher than those in the ⁹³Nb(γ, 4n) and ^natZr(p, xn) reactions, which indicates the role of input angular momentum. The isomeric-yield ratios of ^89m,gNb in the ⁹³Nb(γ, 4n), ^natZr(p, xn), ⁸⁹Y(α, 4n), and ⁸⁹Y(³He, 3n) reactions were also calculated theoretically using computer code TALYS 1.4. The theoretical isomeric-yield ratios of ^89m,gNb from four reactions increase with excitation energy. However, the theoretical value are significantly higher than the experimental data in the ⁹³Nb(γ, 4n) and ^natZr(p, xn) reactions but slightly lower or comparable in the ⁸⁹Y(α, 4n) rand ⁸⁹Y(³He, 3n) reactions.     

Steric and Electronic Influence on the Coordination Aptitude of 4‐Formylpiperazine‐1‐Carbodithioate Towards Triorganotin(IV) Moieties

A fascinating ligand, 4‐formylpiperazinium 4‐formylpiperazine‐1‐carbodithioate (L‐salt) has been reacted with two electronically and sterically different trimethyltin(IV) chloride and triphenyltin(IV) chloride. The complexes 1 and 2 were characterized by elemental analysis, spectroscopic techniques, and X‐ray single crystal analysis. The latter technique confirmed the polymeric and monomeric nature of 1 and 2 , respectively. Both 1 and 2 showed intriguing molecular packing properties in the solid state. However, the packing of 1 is more interesting and unique where one‐dimensional polymer chains self assemble in two‐over‐two saltire‐shaped fashion to provide an overall multilayered structure. The different behavior of L toward two different tin(IV) compounds can be attributed to different electronic and steric environments around metal center.     

Numerical Modeling of Functional Fatigue in NiTi Wires

Motivated by the high potential of shape memory alloys (SMA) in several industrial applications, we investigate the material response under cyclic loading. In particular, the focus is set on the modelling of functional fatigue, which results in the deterioration of the specific features of SMA. In fact, functional fatigue restricts SMA in terms of its applicability for real structures and workpieces. This necessitates the development of material models which take this phenomenon into account. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Experimental comparison of performance and emission characteristics of 4-stroke CI engine operated with Roselle and Jatropha biodiesel blends

The environmental degradation, combined with the continuous depletion of the world's fossil fuel reserves, has forced the search for alternative fuels. This study was performed to investigate the performance of novel biodiesels in the CI engine. The experiments were performed at three different compressions ratios (16:1, 17:1, 18:1) and four loading conditions (25%, 50%, 75%, 100%). Different types of fuels such as jatropha biodiesel (JB), roselle biodiesel (RB), and ternary biodiesel (TB) were prepared and analyzed. The thermal performance of different fuels was analyzed in terms of brake thermal efficiency (BTE), brake specific fuel consumption (BSFC), and exhaust gas temperature (EGT). The emission characteristics such as CO₂ emission, NO_x emission, and smoke emission were analyzed for all types of fuels. The results of these fuels in the engine were compared with mineral diesel (MD). The BTE was increased with increasing compression ratios and loads for all types of fuels. The BSFC was increased with increasing compression ratios but decreased with increasing loads. The increase in emission of NO_x was observed at higher compression ratios and loads. However, the CO₂ emission was decreased at higher loads and lower compression ratio. The performance curves achieved with a 20% jatropha biodiesel blend showed results that were approximate to those obtained with pure MD. The comparative analysis between different fuels showed that JB exhibit higher thermal performance as compared to other biodiesels. Therefore, JB can be a better alternative to conventional fuel.     

Phenylpropanoids from Tanacetum baltistanicum with Nematocidal and Insecticidal Activities

Chemistry of Natural Compounds - One new and seven known secondary metabolites 1–8 were isolated, and the nematocidal and insecticidal activities of major compounds from Tanacetum...