Ultra-soft magnetic properties and giant magneto-impedance of Co68Fe4.5Si12·5B15

We have prepared an amorphous Co₆₈Fe_4.5Si_l2·₅B₁₅ alloy, annealed it in the temperature range of 200-580 °C and carried out a detailed study of the effect of crystallization on its magnetic properties. When annealed in an optimized condition, a very high value of initial permeability of the order of ~ 10⁴ has been attained in association with a drastic decrease of the relative loss factor. This change of properties has been attributed due to the formation of nanograins of fcc Co and Co₃B, as identified by X-ray diffraction and differential thermal analysis. The activation energy of crystallization is 4.18 eV. Hysteresis loop parameters were then extensively studied for the samples annealed at various temperatures. Finally, a very high value of giant magneto-impedance (GMI)—which is a characteristic property of Co-based amorphous alloys derived from well defined anisotropy axis (around 375) has been observed for a sample annealed at 380 °C.     

Natural radioactivity levels in river, stream and drinking water of the northwestern areas of Pakistan

Natural radioactivity in the aquatic media has been determined by collecting samples of river, stream and drinking water from the northwestern areas of Pakistan. The concentrations of ⁴⁰K, ²²⁶Ra and ²³²Th have been measured using a low background gamma-spectrometer and a 10 cm³ planar intrinsic high purity germanium detector. The annual ingestion of these radionuclides, using local consumption rates (average over the whole population) of 0.9 l^.d^-1, were estimated to be 49.2, 6.2 and 1.1 Bq^.y^-1 for ⁴⁰K, ²²⁶Ra and ²³²Th, respectively. A comparison of the annual intakes of these radionuclides, using annual consumption rates of NCRP, ICRP and FBSP shows that the contribution from natural radionuclides to annual intake is slightly greater for NCRP than for ICRP and FBSP consumption rates. However, the estimated values and weighted means of these radionuclides compare well with the world average. The annual effective dose equivalent from drinking water was found to be 3.6^.10^-6 mSv^.y^-1 (²²⁶Ra), 3.2^.10^-12 mSv^.y^-1 (²³²Th) and 2.1^.10^-6 mSv^.y^-1 (⁴⁰K). These values are lower than those given by NCRP.     

A One‐Pot Chemically Cleavable Bis‐Linker Tether Strategy for the Synthesis of Heterodimeric Peptides

Heterodimeric peptides linked by disulfide bonds are attractive drug targets. However, their chemical assembly can be tedious, time‐consuming, and low yielding. Inspired by the cellular synthesis of pro‐insulin in which the two constituent peptide chains are expressed as a single‐chain precursor separated by a connecting C‐peptide, we have developed a novel chemically cleavable bis‐linker tether which allows the convenient assembly of two peptide chains as a single “pro”‐peptide on the same solid support. Following the peptide cleavage and post‐synthetic modifications, this bis‐linker tether can be removed in one‐step by chemical means. This method was used to synthesize a drug delivery‐cargo conjugate, TAT‐PKCi peptide, and a two‐disulfide bridged heterodimeric peptide, thionin (7‐19)‐(24‐32R), a thionin analogue. To our knowledge, this is the first report of a one‐pot chemically cleavable bis‐linker strategy for the facile synthesis of cross‐bridged two‐chain peptides.     

Total Chemical Synthesis of an Intra‐A‐Chain Cystathionine Human Insulin Analogue with Enhanced Thermal Stability

Despite recent advances in the treatment of diabetes mellitus, storage of insulin formulations at 4 °C is still necessary to minimize chemical degradation. This is problematic in tropical regions where reliable refrigeration is not ubiquitous. Some degradation byproducts are caused by disulfide shuffling of cystine that leads to covalently bonded oligomers. Consequently we examined the utility of the non‐reducible cystine isostere, cystathionine, within the A‐chain. Reported herein is an efficient method for forming this mimic using simple monomeric building blocks. The intra‐A‐chain cystathionine insulin analogue was obtained in good overall yield, chemically characterized and demonstrated to possess native binding affinity for the insulin receptor isoform B. It was also shown to possess significantly enhanced thermal stability indicating potential application to next‐generation insulin analogues.     

Salivary MMP-9 Levels in Chronic Periodontitis Patients with Type-II Diabetes Mellitus

Chronic periodontitis and diabetes mellitus share a two-way relationship, the common factor being the inflammatory-mediated pathway, and various cytokines are released during this inflammatory cascade, one of which being matrix metalloproteinase-9. The aim of this study was to identify whether the levels of matrix metalloproteinase-9 are increased due to type-II diabetes mellitus in chronic periodontitis patients. It was an observational, analytical, case-control study. Thirty subjects were recruited in the test group, who were suffering from type-II diabetes mellitus and chronic periodontitis, and 30 subjects in the control group, who were subjects with chronic periodontitis but systemically healthy. Periodontal parameters, including the plaque score, gingival bleeding index, probing pocket depth and clinical attachment level of the subjects, were measured, saliva samples of all of the subjects were collected and salivary matrix metalloproteinase-9 levels were analyzed by an enzyme-linked immunosorbent assay (ELISA) technique. The statistical analysis was performed using SPSS 24. Overall, the matrix metalloproteinase-9 levels of the diabetic patients with chronic periodontitis were increased almost twofold (156.95 ± 29.80 ng/mL) compared to the levels in the controls (74.96 ± 6.32 ng/mL) (p < 0.001). Similarly, the periodontal parameters were far worse in diabetics with chronic periodontitis compared to the controls. The average gingivitis score for the test subjects was 78.45 ± 8.93%), compared to 29.32 ± 12.96% in the controls (p < 0.001). The mean probing pocket depth for the test group was 5.39 ± 0.60 mm, and, for the control group, it was 4.35 ± 0.31 mm (p < 0.001). For the test subjects, the average clinical attachment level was 5.86 ± 0.58 mm, and it was 4.66 ± 0.32 mm for the controls (p < 0.001). It was ascertained that there is a two-fold increase in the levels of salivary matrix metalloproteinase-9 in the test group compared to the control group. In addition, the level of periodontal apparatus destruction was greater in the test group. This proved that type-II diabetes mellitus influences the levels of matrix metalloproteinase-9 in humans and elevates them, causing further periodontal destruction.     

Studies on solvophobic interactions and micelle formation in non aqueous solvents

Micelle formation of various surfactants, such as sodium caprylate, sodium laurate, sodium palmitate and sodium stearate has been studied in organic solvents of various dielectric constants and intermolecular H-bonding capability, viz. molten acetamide, N-methyl acetamide (NMA) and N,N-dimethyl acetamide (DMA), at different temperatures by electrical conductivity and surface tension methods. Both methods show that micelles are formed in acetamide, NMA and DMA. Gibbs energy changes, enthalpies and entropies of micelle formation, respectively, have been determined by studying the variation of critical micelle concentration (c.m.c.) with temperature. Micelle formation in these solvents has been explained on the basis of several factors such as dielectric constant of the medium, its intermolecular H-bonding capability including solvophobic interaction.     

Liquid‐Crystal‐Mediated Self‐Assembly of Porous α‐Fe2O3 Nanorods on PEDOT:PSS‐Functionalized Graphene as a Flexible Ternary Architecture for Capacitive Energy Storage

A novel aqueous‐based self‐assembly approach to a composite of iron oxide nanorods on conductive‐polymer (CP)‐functionalized, ultralarge graphene oxide (GO) liquid crystals (LCs) is demonstrated here for the fabrication of a flexible hybrid material for charge capacitive application. Uniform decoration of α‐Fe₂O₃ nanorods on a poly(3,4‐ethylene‐dioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)‐functionalized, ultralarge GO scaffold results in a 3D interconnected layer‐by‐layer (LBL) architecture. This advanced interpenetrating network of ternary components is lightweight, foldable, and possesses highly conductive pathways for facile ion transportation and charge storage, making it promising for high‐performance energy‐storage applications. Having such structural merits and good synergistic effects, the flexible architecture exhibits a high specific discharge capacitance of 875 F g^?1 and excellent volumetric specific capacitance of 868 F cm^?3 at 5 mV s^?1, as well as a promising energy density of 118 W h kg^?1 (at 0.5 A g^?1) and promising cyclability, with capacity retention of 100% after 5000 charge–discharge (CD) cycles. This synthesis method provides a simple, yet efficient approach for the solution‐processed LBL insertion of the hematite nanorods (HNR) into CP‐functionalized novel composite structure. It provides great promise for the fabrication of a variety of metal‐oxide (MO)‐nanomaterial‐based binder and current collector‐free flexible composite electrodes for high‐performance energy‐storage applications.     

Novel microstructural growth in the surface of Inconel 625 by the addition of SiC under electron beam melting

Electron beam melting is being used to modify the microstructure of the surfaces of materials due to its ability to cause localized melting and supercooling of the melt. This article presents an experimental study on the surface modification of Ni-based superalloy (Inconel 625) reinforced with SiC ceramic particles under electron beam melting. Scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction techniques have been applied to characterize the resulted microstructure. The results revealed growth of novel structures like wire, rod, tubular, pyramid, bamboo and tweezers type morphologies in the modified surface. In addition to that fibrous like structure was also observed. Formation of thin carbon sheet has been found at the regions of decomposed SiC. Electron beam modified surface of Inconel 625 alloy has been hardened twice as compared to the as-received samples. Surface hardening effect may be attributed to both the formation of the novel structures as well as the introduction of Si and C atom in the lattice of Inconel 625 alloy.